95' SE s14 PART OUT **SR20 motorset and more** PICS - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

s14unimog · 05-27-2008, 06:45 PM

So exactly as the title states. I finally got the car, as some of you have been waiting on, and the parts are already flying off.

Here are the big items: (the car was rear ended so the kouki tails, the rear
quarter panels, the rear bumper, trunk, and factory wing are all dead)

s13 Blacktop SR20DET J4 ECU (98' model, type X model) with s14 converted harness, divorced dump pipe, and AEM intake. ($2500)

Greddy Turbo timer with S14 harness ($100)

Greddy Catch Can, never had oil in it
SOLD SOLD SOLD

Zenki Corner lights, one has a broken tab ($40)

SE blinker and wiper controls ($40ea)

Factory tension arms with polly bushings ($70)

Factory floor mat set ($40)

climate control unit ($30)

Blitz SBC-id boost controller and power meter
SOLD SOLD SOLD

17" (4) Z33 wheels with tires (two pictured). The pictures are deceiving; they are very dirty but in excellent shape. the fronts have 225's with about 40% tread and the rears need replacing but have some tread and they're 245's($250)

Full Z32 brakes F/R set, 30mm slotted and vented rotors,ss lines (4), R33 ebrake line, ebrake hub assembly, and brand new Project Mu pads) ($500)

5 Lug front spindles and rear hubs (rears pictured above on the car) ($450)

Cusco Coilovers (non dampening adjustable) ($450)
SOLD

3" down pipe Greddy/Trust ($100)
sorry forgot to take a picture, but its in great shape with only minor scratches

stock s14 VLSD ($250)
its there, trust me

FMIC with 1 piece hot pipe w/bov hose barb flange, 1 piece cold pipe, and all couplers and clamps. surprisingly light too. (I forgot to write the make down) ($300)

HKS SSQV BOV with flange and recirculation fitting. ($150)

Autometer Phantom II boost gage and single pod a-pillar mount ($50)
SOLD SOLD SOLD

stock Zenki front fenders ($75)ea

Everything thats gone includes: dash board, F/R seats, door panels, coolent reservoir, sunroof (still have the motor), drivers side window controls, catback, test pipe, glove box. I think thats it. If I haven't listed it I still have it

The car was NEVER drifted, auto crossed, dragged, or anything. It was built to be an average SR powered s14 and nothing more. All oil changes were done every 3k miles with royal purple. I can't stress this enough it has never been used for more than just going down the road.

ALSO if you decide to purchase a part I'll let you know if I have it with me and can ship it out easily (small light stuff). Otherwise I'll have to arrange time to remove or deal with the bigger items next week. I have a drift event coming up this weekend so if its already off the car and I can easily ship it then I will. I will do my best to respond but I'll have a lot of requests. If your really serious call me at 404 403 2231.

louisdaboois · 05-27-2008, 07:00 PM

can i get the front lower control arms?

hailandkill · 05-27-2008, 07:44 PM

I'd like to take those Cusco coilovers. They are for the s14 right? Anything wrong with them? Leaks, etc? PM me a shipping quote to 07306.

s14unimog · 05-27-2008, 07:45 PM

Quote:

Originally Posted by hailandkill

I'd like to take those Cusco coilovers. They are for the s14 right? PM me a shipping quote to 07306.

I'll need more than a Zip Code, city too

s14unimog · 05-27-2008, 07:45 PM

^ yeah, you want both?

PM me an offer

BrokenWhite240 · 05-27-2008, 07:54 PM

Quote:

Originally Posted by s14unimog

^ yeah, you want both?

PM me an offer

If he doesn't take them ill take them as long as the ball joints and boots are good.

s14unimog · 05-27-2008, 07:54 PM

Quote:

Originally Posted by BrokenWhite240

If he doesn't take them ill take them as long as the ball joints and boots are good.

one boot needs to be replaced

louisdaboois · 05-27-2008, 09:53 PM

Quote:

Originally Posted by s14unimog

^ yeah, you want both?

PM me an offer

yessir, i'd love to have both. I pm'd you, let me know what you think. thanks!

WTS3 · 05-27-2008, 07:47 PM

$200 for the front hubs+spindles? i live in GA also so possibly no shipping...

s14unimog · 05-27-2008, 07:54 PM

Quote:

Originally Posted by WTS3

$200 for the front hubs+spindles? i live in GA also so possibly no shipping...

if you can do 250 then you've got a deal, they're off and ready to go.

LA_phantom_240 · 05-27-2008, 08:27 PM

I want your mats. How much shipped to Slidell, LA 70461?

3D-sOn · 05-27-2008, 08:38 PM

Do you have the drivers side headlight? Might be interested in the headlight and corner light driver side that is

WTS3 · 05-27-2008, 08:46 PM

ho about $225? where in GA are you located?

2005gerardom · 05-27-2008, 08:52 PM

you have the window motor driver how much

EDT007 · 05-27-2008, 08:55 PM

Can you take some pics of the downpipe?..I'm interested. Thanks.

Keith_Bergen · 05-27-2008, 09:01 PM

Are the carpeted interior trunk panels by any chance still in good condition? if so how much? what color?

eek · 05-27-2008, 09:04 PM

PMed you on the sbc stuff.

calico · 05-28-2008, 12:13 AM

pm sent about shifter trim plate

roddy · 05-28-2008, 01:54 AM

is the car 5speed? can i take all the 5speed stuff for swap?

and how much for the wheels shipped to california 95132 w/o tires?

bees · 05-28-2008, 02:34 AM

just sent u an pm

s14unimog · 05-28-2008, 06:42 AM

Quote:

Originally Posted by LA_phantom_240

I want your mats. How much shipped to Slidell, LA 70461?

UPS is saying about $25

Quote:

Originally Posted by 3D-sOn

Do you have the drivers side headlight? Might be interested in the headlight and corner light driver side that is

the head lights were both broken and they sold anyways. I still have the corner lights tho. PM me an offer.

Quote:

Originally Posted by WTS3

ho about $225? where in GA are you located?

about 15mins north on 985 from the Mall of Georgia. $250 they are in great shape, you can have the lugs too

Quote:

Originally Posted by 2005gerardom

you have the window motor driver how much

yeah PM me an offer.

Quote:

Originally Posted by EDT007

Can you take some pics of the downpipe?..I'm interested. Thanks.

I can but it wont be until next week, I don't have the car at my house. Apartments FTW

Quote:

Originally Posted by Keith_Bergen

Are the carpeted interior trunk panels by any chance still in good condition? if so how much? what color?

The carpets still there and in nice shape, PM me an offer unshipped.

Quote:

Originally Posted by eek

PMed you on the sbc stuff.

replied

Quote:

Originally Posted by calico

pm sent about shifter trim
plate

replied, it was broken.

Quote:

Originally Posted by roddy

is the car 5speed? can i take all the 5speed stuff for swap? yeah. I'll give you the clutch pedal, brake pedal, mater cylinder, hardline, driveshaft, cross member, slave cylinder and the SS line that jumps from the hard line to the slave for $300

and how much for the wheels shipped to california 95132 w/o tires?

I really don't want to ship those.

Quote:

Originally Posted by bees

just sent u an pm

replied.

0wn3r · 05-28-2008, 09:31 AM

pm me if you have the radio trim in perf condition.

s14unimog · 05-28-2008, 12:29 PM

Quote:

Originally Posted by 0wn3r

pm me if you have the radio trim in perf condition.

radio trim was broken, sorry.

90KAcoupe · 05-28-2008, 01:59 PM

hey man pm me about maybe selling your ebrake backing plates, r33 brake lines, and the project mu pads. If you still have the floor mats ill get them to!

s14unimog · 05-29-2008, 07:16 AM

^ I'm not parting out the brakes at the moment. I'll let you know if I change my mind. PM me a shipping address and I'll get you a quote on those rugs. There is someone in front of you on the mats but its first come first serve. in other words, money talks.

LA_phantom_240 · 05-29-2008, 07:46 AM

Quote:

Originally Posted by s14unimog

^ I'm not parting out the brakes at the moment. I'll let you know if I change my mind. PM me a shipping address and I'll get you a quote on those rugs. There is someone in front of you on the mats but its first come first serve. in other words, money talks.

lol. I pm'd you yesterday.

fuzz master · 05-29-2008, 07:30 AM

need clutch pedal and assembly shipped to 33023

nzmoman · 05-29-2008, 07:38 AM

you got a pm

Firemediccharles · 05-30-2008, 08:12 PM

kind off topic but how did you like the aut meter phantom2. dose it really go black at night and dose it look good????

nzmoman · 05-30-2008, 08:35 PM

PM'd again...

05-27-2008, 06:45 PM	#1
s14unimog Nissanaholic! Join Date: Dec 2003 Location: In a place, near a river, over a lake Age: 38 Posts: 2,415 Trader Rating: (22) Rides Gallery: s14unimog Feedback Score: 22 reviews	95' SE s14 PART OUT SR20 motorset and more PICS So exactly as the title states. I finally got the car, as some of you have been waiting on, and the parts are already flying off. Here are the big items: (the car was rear ended so the kouki tails, the rear quarter panels, the rear bumper, trunk, and factory wing are all dead) s13 Blacktop SR20DET J4 ECU (98' model, type X model) with s14 converted harness, divorced dump pipe, and AEM intake. ($2500) Greddy Turbo timer with S14 harness ($100) Greddy Catch Can, never had oil in it SOLD SOLD SOLD Zenki Corner lights, one has a broken tab ($40) SE blinker and wiper controls ($40ea) Factory tension arms with polly bushings ($70) Factory floor mat set ($40) climate control unit ($30) Blitz SBC-id boost controller and power meter SOLD SOLD SOLD 17" (4) Z33 wheels with tires (two pictured). The pictures are deceiving; they are very dirty but in excellent shape. the fronts have 225's with about 40% tread and the rears need replacing but have some tread and they're 245's($250) Full Z32 brakes F/R set, 30mm slotted and vented rotors,ss lines (4), R33 ebrake line, ebrake hub assembly, and brand new Project Mu pads) ($500) 5 Lug front spindles and rear hubs (rears pictured above on the car) ($450) Cusco Coilovers (non dampening adjustable) ($450) SOLD 3" down pipe Greddy/Trust ($100) sorry forgot to take a picture, but its in great shape with only minor scratches stock s14 VLSD ($250) its there, trust me FMIC with 1 piece hot pipe w/bov hose barb flange, 1 piece cold pipe, and all couplers and clamps. surprisingly light too. (I forgot to write the make down) ($300) HKS SSQV BOV with flange and recirculation fitting. ($150) Autometer Phantom II boost gage and single pod a-pillar mount ($50) SOLD SOLD SOLD stock Zenki front fenders ($75)ea Everything thats gone includes: dash board, F/R seats, door panels, coolent reservoir, sunroof (still have the motor), drivers side window controls, catback, test pipe, glove box. I think thats it. If I haven't listed it I still have it The car was NEVER drifted, auto crossed, dragged, or anything. It was built to be an average SR powered s14 and nothing more. All oil changes were done every 3k miles with royal purple. I can't stress this enough it has never been used for more than just going down the road. ALSO if you decide to purchase a part I'll let you know if I have it with me and can ship it out easily (small light stuff). Otherwise I'll have to arrange time to remove or deal with the bigger items next week. I have a drift event coming up this weekend so if its already off the car and I can easily ship it then I will. I will do my best to respond but I'll have a lot of requests. If your really serious call me at 404 403 2231. __________________ Fuking ginger bread man stole my wallet... SHIFTlock_slide to side d3m3rs0n: if i have a baby im naming it Brandons Fault Emerson Last edited by s14unimog; 06-06-2008 at 09:46 AM..*

05-27-2008, 07:45 PM	#5
s14unimog Nissanaholic! Join Date: Dec 2003 Location: In a place, near a river, over a lake Age: 38 Posts: 2,415 Trader Rating: (22) Rides Gallery: s14unimog Feedback Score: 22 reviews	^ yeah, you want both? PM me an offer __________________ Fuking ginger bread man stole my wallet... SHIFT*lock_slide to side d3m3rs0n: if i have a baby im naming it Brandons Fault Emerson

05-27-2008, 09:01 PM	#16
Keith_Bergen Join Date: May 2008 Location: Manitoba Age: 35 Posts: 45 Trader Rating: (1) Feedback Score: 1 reviews	trunk Are the carpeted interior trunk panels by any chance still in good condition? if so how much? what color?

05-28-2008, 01:54 AM	#19
roddy Zilvia Member Join Date: Feb 2008 Location: san jose ca Age: 40 Posts: 247 Trader Rating: (4) Feedback Score: 4 reviews	is the car 5speed? can i take all the 5speed stuff for swap? and how much for the wheels shipped to california 95132 w/o tires? __________________

05-28-2008, 09:31 AM	#22
0wn3r Zilvia Addict Join Date: Oct 2007 Location: CT Posts: 676 Trader Rating: (4) Feedback Score: 4 reviews	pm me if you have the radio trim in perf condition. __________________ 97 240sx se

05-27-2008, 07:00 PM	#2
louisdaboois Zilvia Addict Join Date: Dec 2006 Location: LA, CA Age: 36 Posts: 851 Trader Rating: (28) Feedback Score: 28 reviews	can i get the front lower control arms?

05-27-2008, 07:44 PM	#3
hailandkill Zilvia Addict Join Date: Apr 2008 Location: i hate jersey Age: 36 Posts: 642 Trader Rating: (10) Feedback Score: 10 reviews	I'd like to take those Cusco coilovers. They are for the s14 right? Anything wrong with them? Leaks, etc? PM me a shipping quote to 07306.

05-27-2008, 07:47 PM	#9
WTS3 Zilvia Member Join Date: Apr 2008 Location: Atlanta Posts: 211 Trader Rating: (0) Feedback Score: 0 reviews	$200 for the front hubs+spindles? i live in GA also so possibly no shipping...

05-27-2008, 08:38 PM	#12
3D-sOn Join Date: May 2008 Location: EsCO Age: 37 Posts: 23 Trader Rating: (0) Feedback Score: 0 reviews	Do you have the drivers side headlight? Might be interested in the headlight and corner light driver side that is

05-27-2008, 08:46 PM	#13
WTS3 Zilvia Member Join Date: Apr 2008 Location: Atlanta Posts: 211 Trader Rating: (0) Feedback Score: 0 reviews	ho about $225? where in GA are you located?

05-27-2008, 08:52 PM	#14
2005gerardom Leaky Injector Join Date: Mar 2008 Location: miami Age: 44 Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	you have the window motor driver how much

05-27-2008, 08:55 PM	#15
EDT007 Zilvia Addict Join Date: Feb 2008 Location: NJ Age: 43 Posts: 617 Trader Rating: (8) Feedback Score: 8 reviews	Can you take some pics of the downpipe?..I'm interested. Thanks.

05-27-2008, 09:04 PM	#17
eek Zilvia FREAK! Join Date: Feb 2004 Location: California Age: 44 Posts: 1,025 Trader Rating: (29) Feedback Score: 29 reviews	PMed you on the sbc stuff.

05-28-2008, 12:13 AM	#18
calico Leaky Injector Join Date: Aug 2005 Location: TN Posts: 64 Trader Rating: (4) Feedback Score: 4 reviews	pm sent about shifter trim plate

05-28-2008, 02:34 AM	#20
bees Zilvia Member Join Date: Oct 2006 Location: socal Posts: 225 Trader Rating: (8) Feedback Score: 8 reviews	just sent u an pm

05-28-2008, 01:59 PM	#24
90KAcoupe Zilvia Junkie Join Date: Nov 2006 Location: mt. juliet TN Age: 33 Posts: 542 Trader Rating: (0) Feedback Score: 0 reviews	hey man pm me about maybe selling your ebrake backing plates, r33 brake lines, and the project mu pads. If you still have the floor mats ill get them to! __________________ the sig rules are gay!!

05-29-2008, 07:16 AM	#25
s14unimog Nissanaholic! Join Date: Dec 2003 Location: In a place, near a river, over a lake Age: 38 Posts: 2,415 Trader Rating: (22) Rides Gallery: s14unimog Feedback Score: 22 reviews	^ I'm not parting out the brakes at the moment. I'll let you know if I change my mind. PM me a shipping address and I'll get you a quote on those rugs. There is someone in front of you on the mats but its first come first serve. in other words, money talks. __________________ Fuking ginger bread man stole my wallet... SHIFT*lock_slide to side d3m3rs0n: if i have a baby im naming it Brandons Fault Emerson

05-29-2008, 07:30 AM	#27
fuzz master Leaky Injector Join Date: Apr 2008 Location: miramar fl Posts: 69 Trader Rating: (0) Feedback Score: 0 reviews	need clutch pedal and assembly shipped to 33023

05-29-2008, 07:38 AM	#28
nzmoman Zilvia Junkie Join Date: Feb 2008 Location: South Age: 43 Posts: 317 Trader Rating: (2) Feedback Score: 2 reviews	you got a pm

05-30-2008, 08:12 PM	#29
Firemediccharles Leaky Injector Join Date: Mar 2008 Location: Palm bay Posts: 55 Trader Rating: (0) Feedback Score: 0 reviews	kind off topic but how did you like the aut meter phantom2. dose it really go black at night and dose it look good????

05-30-2008, 08:35 PM	#30
nzmoman Zilvia Junkie Join Date: Feb 2008 Location: South Age: 43 Posts: 317 Trader Rating: (2) Feedback Score: 2 reviews	PM'd again...