Apex'i N1 Single exhaust vibration - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

bshotts · 03-08-2003, 12:10 AM

I just installed the N1 on my '96 and it seems to rattle when the exhaust warms up. When I took the stock exhaust off, I removed a black piece of rubber and bracket. Do I have to install that back onto the Apex'i system?

S14Speed997 · 03-21-2003, 01:25 PM

Yea, you are going to have to put the gasket seal back in there....That seals the connection, and also takes care of any unwanted vibration...

N1ceDrgn · 03-21-2003, 03:47 PM

The N1 exhaust should be made to make use of all the rubber hangars and connections on your car. If not, it isn't made for your car. It should both bolt up and hang in all the same places as your stock exhaust.

S14Speed997 · 03-21-2003, 03:55 PM

ohh...u meant rubber hangers......yea, there should be 4 rubber hangers i believe, 2 near the muffler itself, and 2 on the piping...
good call N1cedrgn!....if they dont match up exactly, then u have the wrong exhaust

03-08-2003, 12:10 AM	#1
bshotts Zilvia Junkie Join Date: Jan 2003 Location: Indianapolis, IN Age: 42 Posts: 472 Trader Rating: (13) Feedback Score: 13 reviews	Apex'i N1 Single exhaust vibration I just installed the N1 on my '96 and it seems to rattle when the exhaust warms up. When I took the stock exhaust off, I removed a black piece of rubber and bracket. Do I have to install that back onto the Apex'i system?

03-21-2003, 03:47 PM	#3
N1ceDrgn Zilvia Member Join Date: Nov 2002 Location: SoCal Posts: 259 Trader Rating: (0) Feedback Score: 0 reviews	The N1 exhaust should be made to make use of all the rubber hangars and connections on your car. If not, it isn't made for your car. It should both bolt up and hang in all the same places as your stock exhaust. __________________ ..working on something that is slowly getting built up and restored..

03-21-2003, 01:25 PM	#2
S14Speed997 Zilvia Junkie Join Date: Mar 2003 Location: Tampa, FL Age: 45 Posts: 527 Trader Rating: (0) Feedback Score: 0 reviews	Yea, you are going to have to put the gasket seal back in there....That seals the connection, and also takes care of any unwanted vibration...

03-21-2003, 03:55 PM	#4
S14Speed997 Zilvia Junkie Join Date: Mar 2003 Location: Tampa, FL Age: 45 Posts: 527 Trader Rating: (0) Feedback Score: 0 reviews	ohh...u meant rubber hangers......yea, there should be 4 rubber hangers i believe, 2 near the muffler itself, and 2 on the piping... good call N1cedrgn!....if they dont match up exactly, then u have the wrong exhaust