Alignment help!!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

topher_s13 · 05-06-2009, 11:53 PM

I have 1992 nissan 180sx and im looking for alignment specs. for it, or any info about the specs. And if a 1992 nissan 240sx has the same specs as the jdm 180sx. Or if any one knows a better (camber) spec in regards for drifting. The rear camber of my car is wearing the inside edges of my tires so any help would be great.

HYPNOTIK · 05-07-2009, 03:33 AM

It's probly your toe that is jacked, toe destroys tires alot faster than camber. If it's strictly a drift car you could do like -3 camber and 0 or +.5 toe. If it's a daily driver too, maybe -2 camber and -.5 or 0 toe.

redsx13 · 05-12-2009, 12:45 AM

i would run 0* toe all the way around and -1.0* through -1.5* camber in the rear.

topher_s13 · 05-07-2009, 12:02 PM

awesome thank you very much

topher_s13 · 05-12-2009, 12:20 AM

i was looking over the specs from a John Bean Aligner and the spec for a 1992 240sx for the rear camber is -1.67 to -.67 and its sitting at -1.80 so almost -2.0 and i know its a camber issue cuz its wearing the inside edge of the tires...any suggestions??

05-06-2009, 11:53 PM	#1
topher_s13 Join Date: May 2009 Location: Canada Age: 37 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	Alignment help!!!! I have 1992 nissan 180sx and im looking for alignment specs. for it, or any info about the specs. And if a 1992 nissan 240sx has the same specs as the jdm 180sx. Or if any one knows a better (camber) spec in regards for drifting. The rear camber of my car is wearing the inside edges of my tires so any help would be great.

05-07-2009, 03:33 AM	#2
HYPNOTIK Zilvia Addict Join Date: Apr 2008 Location: Pisa, Italy Posts: 700 Trader Rating: (3) Feedback Score: 3 reviews	It's probly your toe that is jacked, toe destroys tires alot faster than camber. If it's strictly a drift car you could do like -3 camber and 0 or +.5 toe. If it's a daily driver too, maybe -2 camber and -.5 or 0 toe. __________________

05-12-2009, 12:45 AM	#3
redsx13 Zilvia Junkie Join Date: Jan 2009 Location: Agoura Hills, Ca Age: 35 Posts: 572 Trader Rating: (6) Feedback Score: 6 reviews	i would run 0* toe all the way around and -1.0* through -1.5* camber in the rear.

05-07-2009, 12:02 PM	#4
topher_s13 Join Date: May 2009 Location: Canada Age: 37 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	awesome thank you very much

05-12-2009, 12:20 AM	#5
topher_s13 Join Date: May 2009 Location: Canada Age: 37 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	i was looking over the specs from a John Bean Aligner and the spec for a 1992 240sx for the rear camber is -1.67 to -.67 and its sitting at -1.80 so almost -2.0 and i know its a camber issue cuz its wearing the inside edge of the tires...any suggestions??