sr injector o-ring question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

onesloka · 09-12-2009, 07:34 PM

I can't seem to find out which to use. I've searched and found information about using KA o-rings or 95 and up 300zx o-rings. Which do i use? Also can i use the two rubber grommets from the same vehicle?

garagelu · 09-12-2009, 07:37 PM

Ka injectors and Sr injectors interchange. I used ka injector o-rings from the dealer on my nismo 740cc injectors for my sr.

And what rubber grommets are you talking about?

onesloka · 09-12-2009, 07:41 PM

The upper grommet that holds the injector down and the big one on the manifold that the injector sits on that you can see without removing anything. Hope that helps with an answer.

jimmytango00 · 09-12-2009, 07:42 PM

Quote:

Originally Posted by onesloka

I can't seem to find out which to use. I've searched and found information about using KA o-rings or 95 and up 300zx o-rings. Which do i use? Also can i use the two rubber grommets from the same vehicle?

o

the rubber grommets just use the ones off a ka or g20

onesloka · 09-12-2009, 08:21 PM

ah okay thank you for clearing it up for me.

09-12-2009, 07:34 PM	#1
onesloka Leaky Injector Join Date: Dec 2007 Location: az Age: 37 Posts: 51 Trader Rating: (1) Feedback Score: 1 reviews	sr injector o-ring question I can't seem to find out which to use. I've searched and found information about using KA o-rings or 95 and up 300zx o-rings. Which do i use? Also can i use the two rubber grommets from the same vehicle?

09-12-2009, 07:37 PM	#2
garagelu Nissanaholic! Join Date: Aug 2005 Location: Atlanta, GA Age: 40 Posts: 1,856 Trader Rating: (60) Feedback Score: 60 reviews	Ka injectors and Sr injectors interchange. I used ka injector o-rings from the dealer on my nismo 740cc injectors for my sr. And what rubber grommets are you talking about?

09-12-2009, 07:41 PM	#3
onesloka Leaky Injector Join Date: Dec 2007 Location: az Age: 37 Posts: 51 Trader Rating: (1) Feedback Score: 1 reviews	The upper grommet that holds the injector down and the big one on the manifold that the injector sits on that you can see without removing anything. Hope that helps with an answer.

09-12-2009, 08:21 PM	#5
onesloka Leaky Injector Join Date: Dec 2007 Location: az Age: 37 Posts: 51 Trader Rating: (1) Feedback Score: 1 reviews	ah okay thank you for clearing it up for me.