ND Fs: Lots of turbo / ka-t parts!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

aznsquad · 10-06-2009, 10:57 PM

ka-t stuff for sale

--------------------------------------------------------------------------------

off of a 96 ka24de

ALL PRICES ARE IN CANADIAN!!!!
PARTS ARE IN CANADA!!!!

hks ssqv bov (newer looking one), comes with a mild steel weld on flange- $200cdn

custom top mount t3 log turbo manifold with tial 38mm wastegate flange welded on (places far away from MBC) - $250cdn

Tial 38mm wastegate (chrome top) 10lb spring, comes with both gaskets- $200cdn

3" aluminum upper cold pipe (stops just at the batt tray) - $40cdn

3'' steel upper cold pipe with hks bov flange welded on. (goes through batt. tray) - $50cdn

2.25 steel upper hot pipe with custom bracket for power steering resevior - $30cdn

2.5" aluminum upper hot pipe with hks flange on it - $50cdn

650cc sidefeed deatschwerks injectors , used for 1 pull $350cdn

810cc sidefeed deatschwerks injectors, used for 3 weeks $450cdn

s14 distributors - $50cdn each

complete s14 a/c assembly - make me offer

Enthalpy Ecu with s14 adapter harness (tuned for n62, 810cc, t3/60-1, 94octane) (made 400whp on 19psi) $500cdn

N62 maf reinforced with copper rtv (bought brand new from nissan 2.5 years ago) - $200cdn

Msd blaster coil 2 (used for 3 weeks) - $50cdn

remember all prices are in CANADIAN cdn dollars. NOT USD, so its cheaper for you!!

shipping not included but will give you good deals if you buy in bulk!

aznsquad · 10-08-2009, 12:07 PM

bump! needd this gone

aznsquad · 10-08-2009, 10:36 PM

enthalpy ecu, 810cc injec, steel charges pipes pending sale

aznsquad · 10-17-2009, 09:51 AM

810, enthalpy ecu and upper steel charge pipes sold!

650s pending

10-06-2009, 10:57 PM	#1
aznsquad Leaky Injector Join Date: Mar 2005 Location: Can Posts: 53 Trader Rating: (2) Feedback Score: 2 reviews	Fs: Lots of turbo / ka-t parts!!! ka-t stuff for sale -------------------------------------------------------------------------------- off of a 96 ka24de ALL PRICES ARE IN CANADIAN!!!! PARTS ARE IN CANADA!!!! hks ssqv bov (newer looking one), comes with a mild steel weld on flange- $200cdn custom top mount t3 log turbo manifold with tial 38mm wastegate flange welded on (places far away from MBC) - $250cdn Tial 38mm wastegate (chrome top) 10lb spring, comes with both gaskets- $200cdn 3" aluminum upper cold pipe (stops just at the batt tray) - $40cdn 3'' steel upper cold pipe with hks bov flange welded on. (goes through batt. tray) - $50cdn 2.25 steel upper hot pipe with custom bracket for power steering resevior - $30cdn 2.5" aluminum upper hot pipe with hks flange on it - $50cdn 650cc sidefeed deatschwerks injectors , used for 1 pull $350cdn 810cc sidefeed deatschwerks injectors, used for 3 weeks $450cdn s14 distributors - $50cdn each complete s14 a/c assembly - make me offer Enthalpy Ecu with s14 adapter harness (tuned for n62, 810cc, t3/60-1, 94octane) (made 400whp on 19psi) $500cdn N62 maf reinforced with copper rtv (bought brand new from nissan 2.5 years ago) - $200cdn Msd blaster coil 2 (used for 3 weeks) - $50cdn remember all prices are in CANADIAN cdn dollars. NOT USD, so its cheaper for you!! shipping not included but will give you good deals if you buy in bulk!

10-08-2009, 12:07 PM	#2
aznsquad Leaky Injector Join Date: Mar 2005 Location: Can Posts: 53 Trader Rating: (2) Feedback Score: 2 reviews	bump! needd this gone

10-08-2009, 10:36 PM	#3
aznsquad Leaky Injector Join Date: Mar 2005 Location: Can Posts: 53 Trader Rating: (2) Feedback Score: 2 reviews	enthalpy ecu, 810cc injec, steel charges pipes pending sale

10-17-2009, 09:51 AM	#4
aznsquad Leaky Injector Join Date: Mar 2005 Location: Can Posts: 53 Trader Rating: (2) Feedback Score: 2 reviews	810, enthalpy ecu and upper steel charge pipes sold! 650s pending