Temp control sensor location for Taurus fan - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

mjhockey155 · 11-22-2009, 06:04 PM

I just installed my taurus fan. I am having trouble locating a spot to install my temp sensor probe. I was thinking about making a T for the upper radiator hose which would accept the 5/8inch probe. Below is a link for the fan controller I am using. Where do you guys think I should try to install the probe? Also, what temp sensor is on the right side of the ecu temp sensor.

Derale 16739 - Derale Single Stage Fan Controllers with Radiator Probes - Overview - SummitRacing.com

Ceepo · 11-22-2009, 09:23 PM

On my fan relay kit i had a prob style temp sensor that sits in between the radiator cooling fins(no coolant accually touches the sensor) and it works awesome you could drill and tap the waterneck for the upper radiator hose, what motor is this going in?

mjhockey155 · 11-23-2009, 07:32 AM

This is going on my stock ka, but soon to be sr. I'd rather not use a sensor that slips between the fins because your only reading surface temperatures which could lead to inconsistent temperature readings.

Do you think I bought the correct relay kit: turns on at 180 degrees and shuts off at 170 degrees?

mjhockey155 · 11-23-2009, 08:23 AM

What 12v ignition source should I use? Should I splice in under the fuse box for the ignition fuse?

g6civcx · 11-23-2009, 08:47 AM

Quote:

Originally Posted by mjhockey155

What 12v ignition source should I use? Should I splice in under the fuse box for the ignition fuse?

Use ignition switched power to trigger a relay. The relay pulls power from the battery.

I discussed this so many times already. I don't want to do this any more.

mjhockey155 · 11-23-2009, 08:54 AM

Where can I locate that ignition switched power under the hood and what wire color? I don't want to run wire through the firewall to locate power.

codyace · 11-23-2009, 07:24 PM

Quote:

Originally Posted by g6civcx

Use ignition switched power to trigger a relay. The relay pulls power from the battery.

I discussed this so many times already. I don't want to do this any more.

Hey man! Hope all is well on your end. I hear ya abotu explaining the same thing 85679x without regard :/

Ceepo · 11-23-2009, 11:22 AM

I ran mine thru the firewall i couldnt find any ignition on wires(didnt really search to hard lol) my fan kit turns on a 185 and off at 170 i have had no problems with it...

mjhockey155 · 11-23-2009, 01:55 PM

Would the rear deffogger switch be a good place to tap into a 12v ignition On source?

Ceepo · 11-23-2009, 02:49 PM

i tapped mine into the stereo wire lol... any ignition on power will do...

codyace · 11-23-2009, 07:28 PM

Quote:

Originally Posted by mjhockey155

I just installed my taurus fan. I am having trouble locating a spot to install my temp sensor probe. I was thinking about making a T for the upper radiator hose which would accept the 5/8inch probe. Below is a link for the fan controller I am using. Where do you guys think I should try to install the probe? Also, what temp sensor is on the right side of the ecu temp sensor.

Derale 16739 - Derale Single Stage Fan Controllers with Radiator Probes - Overview - SummitRacing.com

If you want to use the actual coolant for a source, check out:
Water Feed More Info

I use the Dual Fan Derale Controller with the radiator probe. Works amazing, and has had no issues. I have my drivers side fan on full time (Altima fans) and use the controller to turn the 2nd side on high at 180 degrees, or when AC is turned on. Works like a charm, and it's nice and small (and cheap)

I used my fuel pump relay source, as my relay soruce. This way it just doens't come on when i have the key switched to the on position without it running. I always let the car prime before start, so it's not on at all when i crank it over.

godrifttoday · 11-23-2009, 09:54 PM

Hayden Automotive 3654 - Hayden Electric Fan Controls - Overview - SummitRacing.com

mjhockey155 · 11-25-2009, 10:28 AM

I have decided that I am just going to run a three way toggle switch. One flip turns on the high speed fan, flip it again the high speed circuit breaks and the low speed thermostat controlled circuit is connected.

usajdm · 11-25-2009, 12:09 PM

Must still use relays.

codyace · 11-25-2009, 03:22 PM

Quote:

Originally Posted by usajdm

Must still use relays.

Certainly, and that's why the derale setup is nice, as it's got the built in relay as well.

No reason to hack everything for a switch when you can use the factory setup to make it all work as it was OEM.

11-22-2009, 06:04 PM	#1
mjhockey155 Join Date: Feb 2008 Location: Williamsport Age: 39 Posts: 49 Trader Rating: (0) Feedback Score: 0 reviews	Temp control sensor location for Taurus fan I just installed my taurus fan. I am having trouble locating a spot to install my temp sensor probe. I was thinking about making a T for the upper radiator hose which would accept the 5/8inch probe. Below is a link for the fan controller I am using. Where do you guys think I should try to install the probe? Also, what temp sensor is on the right side of the ecu temp sensor. Derale 16739 - Derale Single Stage Fan Controllers with Radiator Probes - Overview - SummitRacing.com

11-22-2009, 09:23 PM	#2
Ceepo Nissanaholic! Join Date: Jan 2008 Location: Cedar City, Utah Posts: 2,007 Trader Rating: (9) Rides Gallery: Ceepo Feedback Score: 9 reviews	On my fan relay kit i had a prob style temp sensor that sits in between the radiator cooling fins(no coolant accually touches the sensor) and it works awesome you could drill and tap the waterneck for the upper radiator hose, what motor is this going in? __________________ TW: http://zilvia.net/f/cars-sale/390459...d9s-coils.html

11-23-2009, 08:54 AM	#6
mjhockey155 Join Date: Feb 2008 Location: Williamsport Age: 39 Posts: 49 Trader Rating: (0) Feedback Score: 0 reviews	Where can I locate that ignition switched power under the hood and what wire color? I don't want to run wire through the firewall to locate power. Last edited by mjhockey155; 11-23-2009 at 09:48 AM..

11-23-2009, 11:22 AM	#8
Ceepo Nissanaholic! Join Date: Jan 2008 Location: Cedar City, Utah Posts: 2,007 Trader Rating: (9) Rides Gallery: Ceepo Feedback Score: 9 reviews	I ran mine thru the firewall i couldnt find any ignition on wires(didnt really search to hard lol) my fan kit turns on a 185 and off at 170 i have had no problems with it... __________________ TW: http://zilvia.net/f/cars-sale/390459...d9s-coils.html

11-23-2009, 02:49 PM	#10
Ceepo Nissanaholic! Join Date: Jan 2008 Location: Cedar City, Utah Posts: 2,007 Trader Rating: (9) Rides Gallery: Ceepo Feedback Score: 9 reviews	i tapped mine into the stereo wire lol... any ignition on power will do... __________________ TW: http://zilvia.net/f/cars-sale/390459...d9s-coils.html

11-23-2009, 07:32 AM	#3
mjhockey155 Join Date: Feb 2008 Location: Williamsport Age: 39 Posts: 49 Trader Rating: (0) Feedback Score: 0 reviews	This is going on my stock ka, but soon to be sr. I'd rather not use a sensor that slips between the fins because your only reading surface temperatures which could lead to inconsistent temperature readings. Do you think I bought the correct relay kit: turns on at 180 degrees and shuts off at 170 degrees?

11-23-2009, 08:23 AM	#4
mjhockey155 Join Date: Feb 2008 Location: Williamsport Age: 39 Posts: 49 Trader Rating: (0) Feedback Score: 0 reviews	What 12v ignition source should I use? Should I splice in under the fuse box for the ignition fuse?

11-23-2009, 01:55 PM	#9
mjhockey155 Join Date: Feb 2008 Location: Williamsport Age: 39 Posts: 49 Trader Rating: (0) Feedback Score: 0 reviews	Would the rear deffogger switch be a good place to tap into a 12v ignition On source?

11-23-2009, 09:54 PM	#12
godrifttoday Post Whore! Join Date: Jan 2004 Location: los angeles Age: 41 Posts: 3,120 Trader Rating: (82) Feedback Score: 82 reviews	Hayden Automotive 3654 - Hayden Electric Fan Controls - Overview - SummitRacing.com

11-25-2009, 10:28 AM	#13
mjhockey155 Join Date: Feb 2008 Location: Williamsport Age: 39 Posts: 49 Trader Rating: (0) Feedback Score: 0 reviews	I have decided that I am just going to run a three way toggle switch. One flip turns on the high speed fan, flip it again the high speed circuit breaks and the low speed thermostat controlled circuit is connected.

11-25-2009, 12:09 PM	#14
usajdm Zilvia Junkie Join Date: Jan 2006 Location: east bay ca. Posts: 458 Trader Rating: (0) Feedback Score: 0 reviews	Must still use relays. __________________ What the hell is "BALLER" or "GANGSTER" status, about a 240sx?