|
|
|||||||
| For Sale Items Post items for sale here. ABSOLUTELY NO COMMERCIAL SALES. |
 |
|
|
Thread Tools | Display Modes |
|
|
01-30-2010, 10:52 AM
|
#1 |
|
Zilvia.net Advertiser
 
Join Date: Jul 2006
Location: Concord, NC
Posts: 3,127
Trader Rating: (53)
  Feedback Score: 53 reviews
|
FS: NC; 240sx Garage Sale - Cleaning Out
FS: NC; 240sx Garage Sale - Cleaning Out
Kannapolis, NC 28081 [email protected] < Paypal too KA24DE "Real" Crower Rods (not Brian Crower) - $729.99 is what they sell for new - Crower Rods for KA24DE $600.00 for rods shipped in the US Pistons are sold They were pulled from a built motor - that was not speced out correctly and it spun a main bearing on break-in - everything was removed before any damage was done. The piston tops will clean up easily as well. I was going to use them in my turbo motor but money is tight now so they gotta go.        S14 HKS Hi Power Catback $200.00 Its banged up but still works great         S14 "mudflaps" or whatever they are called - $25.00  S13 KA24DE DOHC MAFS - $50.00 Shipped OBO  S13 KA24DE DOHC MAFS w/ top half of air tube (has the rubber seal) - $55.00 Shipped OBO  S13 KA24DE 5 Speed Speed Sensor - $65.00 Shipped OBO  FS; S14 Dash $175.00 Shipping will be around $100-$150 depending on location I have a S14 dash in great shape - its the blueish-grayish color It does have the vent tubes and defrost vent but they are not on in the pictures. I have the climate control bezel too for a extra $40.00 with dash - or alone $55.00 plus s/h I dont have the radio bezel Its in great shape - no rips, tears, cracks I got it for my buddy but then we found a black one for his car    S14 KYB GR-2s with GoldLine Drop Springs - $200.00 OBO 1.75" drop - Great shape all mounted and ready to go.    240sx S14 Zenki 95-96 Front Lip Kannapolis, NC 28081 [email protected] < Paypal I have 2 of them I will ship these for a extra $35.00 in the US I have 1 set of OEM mounting hardware - $50.00 - $60.00 shipped in the US  Painted white - but paint is not sticking to well - normal scrapes on bottom - $100.00           Painted white - pretty beat up - 1 side got worn down - good to fix or make somthing with fiberglass - $40.00            |
|
| Sponsored Links |
|
01-30-2010, 10:52 AM
|
#2 |
|
Zilvia.net Advertiser
Join Date: Jul 2006
Location: Concord, NC
Posts: 3,127
Trader Rating: (53)
Feedback Score: 53 reviews
|
- I have 3 KA24DE motors torn down - let me know if you need anything off one I probably have it.
- S13 black valve cover - great for core @ poweder coater - $50.00   - S13 KA24DE Alternator - $45.00  - S14 KA24DE P/S Pump - painted silver - $45.00  - S14 A/C compressor and bracket - $60.00  - S13 stock Downpipe - $10.00 - 89' MT SOHC ECU - $50.00  - KA MT Flywheel - needs to be resurfaced - $45.00  - S13 & S14 KA starters - $50.00  - S14 valve cover gasket - used but in good shape - $8.00  - S13 Coil assembly - $30.00  - S13 headlight assembly w/ motor and new headlight - red - $40.00   - S14 IIAC and emissions stuff - $15.00  - S13 wiper motor - $10.00  - S13 MAFS - $25.00 - S13 Air box assembly - $20.00 - S14 Air box assembly - $20.00     - S13 stock ground wire - $5.00  - SR20DET tranny harness - $65.00  - S14 KA tranny harness - $65.00  - S13 manual door handles - $20.00  - S13 cruise control cable - $10.00  - S14 center bearing assembly - $35.00  - S14 auto shifter assembly - $20.00 - handle removed  - S13 A/C dryer w/ lines - $20.00   - S13 front bumper grill inserts - $15.00  - SR20DET "New" heat treated - pressure plate and flywheels bolt kits - $35.00  - (2) 2.5" coulpers - $10.00  - SR20DET Tranny Sensors - $35.00  - S14 grey center console - has a crack in the back - $30.00    - S13 SR20DET stock 02 sensor - $10.00  - Stock S13 SR20DET Pulley Kit (crank not shown) - $30.00 - ALt. sold  - Stock SR20DET FPR - $15.00 - Stock SR20DET oil pan - nice dent and a bung screwed in - needs a lil work - $20.00  - S13 polished intake pipe w/ black coiuplers - $45.00  - S13 rear knuckles and hubs - $50.00   - S14 auto drive shaft - $35.00 - S13 KA24DE TB w/ TPS - $45.00 Auto Meter Gauges; - Pro-Comp Ultra Lite - Water Temp - short sweep - 2 5/8" - no sensor - $33.00 plus s/h - Carbon Fiber - Ultra Lite - Air/Fuel Ratio - 2 1/16" - $25.00 plus s/h - Sport-Comp - Boost/Vacuum - long sweep - 2 1/16" - $30.00 plus s/h - Sport Comp - Oil Press. - Electric - short sweep - 2 1/16" - no sending unit - $25.00  - Fujita "New" Super Flow filter - $50.00  KA Rebuild Kits - Not syncros (those are seperate kits) - $99.00 - I have 2  S13-S14 KA24DE CRankshaft - I have 2 1 had a spun bearing (not bad) the other is in great shape.   S13-S14 240sx Cold Air Extension - should fit on both models and any intake - but I can not say for sure - $40.00  S14 ES Rear Cab set Bushing Kit - 7-3119G - $25.00 - Missing 1 bushing for the LCA   |
|
|
|
01-30-2010, 10:53 AM
|
#3 |
|
Zilvia.net Advertiser
Join Date: Jul 2006
Location: Concord, NC
Posts: 3,127
Trader Rating: (53)
Feedback Score: 53 reviews
|
S13 F&R Brake Calipers all hardware (except mounting bolts) - pads still have life left (1 front is missing a pad) - $40.00
 S13 Front Brake Calipers all hardware "plus" mounting bolts - pads still have life left  S13 SR20DET Throttle Body with TPS - $25.00  S13 SR20DET Intake Maniold - $40.00   S13 KA Exhaust Cam - $30.00   S13 Passenger Side Door Bezel and Window Control - Missing cover but still work - $10.00   S13 Driverside Window/Door Controls - $10.00 S13 Mirror Controler - $5.00  |
|
|
|
02-12-2010, 06:13 PM
|
#10 | |||
|
460
 
|
Quote:
Quote:
Quote:
__________________
|
|||
|
|
|
| Bookmarks |
|
|
Hybrid Mode
