MI RB30 Series II short blocks W/ Accessories - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

holemilk00 · 04-03-2011, 08:34 PM

Do you feel inadequate? Sometimes feel like your <500whp car just isn't enough anymore? Well then do I have the cure you, step right up and take a look at this deal:

RB30 Series II Short Blocks ZOZMZGZ

I've realized I don't have the room for three of these and I have one for myself, so here are the extra two for sale. As you can see they have all the accessories on them and all the brackets. Nothing is bent and everything is clean, these are not rust bucket motors like a lot of the ones you see for sale. These are for the base of the mother of all RB builds.

I'd love to have them picked up but I'd be willing to ship if you're willing to pay, I have a pallet and a forklift so it could go freight which will be cheaper.

I will deliver within a reasonable distance for the cost of gas, I will provide receipts and you will be buying me McDonald's before I drive back home.

These things are one hell of a wait from Australia and shipping/import tax/customs usually runs over a grand so I'm going to say I need to at least get my money back out of it.

PM me here I'm here everyday
I take paypal

$1000+shipping

Sorry for the indoor pics but they are all I have for now. If you've seen these things for sale before you know that these are amazingly rust free and clean.

Even the dip stick is in great condition

A/C compressor

Common questions about these are:

Q: Will a RB26 head bolt right to these?
A: Yes after you have the head stud holes in the block machined from 12mm to 14mm they will bolt right up.

Q: Will a RB25 head bolt right to these?
A: No, the above machining has to be done and there are some water jackets that need to be enlarged (this doesn't "HAVE" to be done for it to work, but it is advised)

Q: Will a RB25 neo head bolt right to these?
A: Yes.

Q: How much should the machining cost to get my RB26/25 head to work?
A: I've had two blocks done for each head in the past, never paid over $200 from a VERY reputable shop.

Q: How much is shipping?
A: Usually to a business address anywhere from $200-$400 depending on the distance, a little more for a residential address. (If you know of a cheaper way I will be more than happy to do whatever it takes to use it)

Q: How much do you eat at McDonald's?
A: About $6 bucks

Q: Do you have a head that you will sell with these:
A: Yes I have a R33 GTR RB26 head I will sell with one of them, complete, PM me for details.

Any other questions should be posted in here so I can answer them in open forum in case anyone else has the same question.

JdmGtDriver · 04-03-2011, 09:13 PM

How much for both shipped to 91766 Cali. Also the R33 heads???

JdmGtDriver · 04-11-2011, 12:19 PM

Quote:

Originally Posted by JdmGtDriver

How much for both shipped to 91766 Cali. Also the R33 heads???

Still interested bro. Any chance on the pics for the blocks? Also, any chance on getting more???

Teddy · 04-04-2011, 12:49 AM

Do want. Ughh.

josephin510 · 04-04-2011, 01:01 AM

You have a offer sir check your pm's

holemilk00 · 04-05-2011, 09:02 PM

Quote:

Originally Posted by Teddy

Do want. Ughh.

I will hook you up.

Also on trades guy, not really looking for any more RB motors. I have pretty much everything I need, unless you have an S14 SR swap, then I would think about it.

Spencer dougherty · 04-05-2011, 11:56 PM

good ass price,, might have cash fir this soon

Magical Trevor · 04-07-2011, 02:41 PM

Awesome price! Legit seller!

holemilk00 · 04-08-2011, 02:44 PM

Here are the pics of the head stuff. I also have the intake plenum and the piece that mates it to the ITB's. But it is behind some equipment and its raining here so I don't want to move it out in the rain in order to get it.

nismoninjagtr · 04-09-2011, 09:57 AM

i would love to have that block to play with....., does that oil pan clear an s13's sway bar and sub frame by chance?

holemilk00 · 04-09-2011, 10:01 AM

they do depending on what mounts you use, I have an RB25 oil pan that I will sell too and that way it will clear even with low profile custom mounts. I have used these motors and mckinney mounts and it clears fine with the stock oil pan.

s14tan · 04-09-2011, 05:34 PM

Quote:

Originally Posted by holemilk00

I will deliver within a reasonable distance for the cost of gas, I will provide receipts and you will be buying me McDonald's before I drive back home.

I Lol'd.

Quote:

Originally Posted by holemilk00

Q: How much do you eat at McDonald's?
A: About $6 bucks

Then I lol'd again.

GLWS dude. epic motor.

holemilk00 · 04-11-2011, 01:25 PM

^^ I PMd you back with the shipping. Yes I can get more, they take close six months to get here and clear customs. How many more pics of the blocks do you want?

JdmGtDriver · 04-11-2011, 02:03 PM

Quote:

Originally Posted by holemilk00

^^ I PMd you back with the shipping. Yes I can get more, they take close six months to get here and clear customs. How many more pics of the blocks do you want?

I just saw the extra pics thank you lol

holemilk00 · 04-11-2011, 06:04 PM

EVERYTHING IS SOLD.

Congrats to the new owner Raife. I hope to see them built soon.

And btw for all you lowballers, They were sold for asking price plus shipping which was an EXTREMELY good price.

JdmGtDriver · 04-11-2011, 06:53 PM

Nice congrats with the sale. Please let me know when you get more. I should have the funds by than.

holemilk00 · 04-11-2011, 06:59 PM

Quote:

Originally Posted by JdmGtDriver

Nice congrats with the sale. Please let me know when you get more. I should have the funds by than.

^^this guy and two other people were the only ones not to lowball me with offers like $1500 shipped for everything.

I can get more when you're ready man, like I said, just a little bit of a wait, if you search for threads on here you can see how long some people wait for them. Just hit me up when you are ready. I will say this, they will probably be a little more than these were, with the rising cost of fuel EVERYTHING has gone up when it comes to shipping.

Magical Trevor · 04-11-2011, 07:25 PM

So glad to see these gone

robert.huller · 04-11-2011, 09:23 PM

holemilk, I am gonna get the money together as well. I know you said you can get more, does that include the head and the block?

holemilk00 · 04-11-2011, 09:24 PM

I can get more blocks. I actually bought the head off a member on zilvia here.

hat1324 · 04-28-2011, 09:29 PM

dont want to thread jack, but those of you still looking heres a decent resource that I've found.
rbthirty.com
About 1K to a local warehouse here in the DFW area after all the customs/fees/etc.. I've known a few people that have used them...

04-03-2011, 08:34 PM	#1
holemilk00 Nissanaholic! Join Date: Oct 2006 Location: Cape Coral, FL Posts: 2,486 Trader Rating: (33) Feedback Score: 33 reviews	RB30 Series II short blocks W/ Accessories Do you feel inadequate? Sometimes feel like your <500whp car just isn't enough anymore? Well then do I have the cure you, step right up and take a look at this deal: RB30 Series II Short Blocks ZOZMZGZ I've realized I don't have the room for three of these and I have one for myself, so here are the extra two for sale. As you can see they have all the accessories on them and all the brackets. Nothing is bent and everything is clean, these are not rust bucket motors like a lot of the ones you see for sale. These are for the base of the mother of all RB builds. I'd love to have them picked up but I'd be willing to ship if you're willing to pay, I have a pallet and a forklift so it could go freight which will be cheaper. I will deliver within a reasonable distance for the cost of gas, I will provide receipts and you will be buying me McDonald's before I drive back home. These things are one hell of a wait from Australia and shipping/import tax/customs usually runs over a grand so I'm going to say I need to at least get my money back out of it. PM me here I'm here everyday I take paypal $1000+shipping Sorry for the indoor pics but they are all I have for now. If you've seen these things for sale before you know that these are amazingly rust free and clean. Even the dip stick is in great condition A/C compressor Common questions about these are: Q: Will a RB26 head bolt right to these? A: Yes after you have the head stud holes in the block machined from 12mm to 14mm they will bolt right up. Q: Will a RB25 head bolt right to these? A: No, the above machining has to be done and there are some water jackets that need to be enlarged (this doesn't "HAVE" to be done for it to work, but it is advised) Q: Will a RB25 neo head bolt right to these? A: Yes. Q: How much should the machining cost to get my RB26/25 head to work? A: I've had two blocks done for each head in the past, never paid over $200 from a VERY reputable shop. Q: How much is shipping? A: Usually to a business address anywhere from $200-$400 depending on the distance, a little more for a residential address. (If you know of a cheaper way I will be more than happy to do whatever it takes to use it) Q: How much do you eat at McDonald's? A: About $6 bucks Q: Do you have a head that you will sell with these: A: Yes I have a R33 GTR RB26 head I will sell with one of them, complete, PM me for details. Any other questions should be posted in here so I can answer them in open forum in case anyone else has the same question. __________________ I had a cool signature

04-03-2011, 09:13 PM	#2
JdmGtDriver Zilvia FREAK! Join Date: Feb 2008 Location: Phillips Ranch/Diamond Bar Posts: 1,453 Trader Rating: (28) Feedback Score: 28 reviews	How much for both shipped to 91766 Cali. Also the R33 heads??? __________________ Dream to achieve!!!

04-04-2011, 12:49 AM	#4
Teddy Post Whore! Join Date: Oct 2005 Location: AutoFactory REALIZE Posts: 5,213 Trader Rating: (44) Feedback Score: 44 reviews	Do want. Ughh. __________________ www.realize-jp.net

04-04-2011, 01:01 AM	#5
josephin510 Zilvia Junkie Join Date: Mar 2009 Location: richmond Age: 36 Posts: 504 Trader Rating: (0) Feedback Score: 0 reviews	You have a offer sir check your pm's __________________ Trade my Rb25 for some wheels. Buy my Sc300.

04-08-2011, 02:44 PM	#9
holemilk00 Nissanaholic! Join Date: Oct 2006 Location: Cape Coral, FL Posts: 2,486 Trader Rating: (33) Feedback Score: 33 reviews	Here are the pics of the head stuff. I also have the intake plenum and the piece that mates it to the ITB's. But it is behind some equipment and its raining here so I don't want to move it out in the rain in order to get it. __________________ I had a cool signature

04-05-2011, 11:56 PM	#7
Spencer dougherty Post Whore! Join Date: Feb 2007 Location: Santa Ana CA SideWays Performance 1(714)330-0021 Age: 42 Posts: 2,554 Trader Rating: (65) Rides Gallery: Spencer dougherty Feedback Score: 65 reviews	good ass price,, might have cash fir this soon

04-07-2011, 02:41 PM	#8
Magical Trevor Zilvia Addict Join Date: Jun 2007 Location: Houston Posts: 610 Trader Rating: (8) Feedback Score: 8 reviews	Awesome price! Legit seller!

04-09-2011, 09:57 AM	#10
nismoninjagtr Zilvia Junkie Join Date: Apr 2010 Location: The "O" state Posts: 484 Trader Rating: (7) Feedback Score: 7 reviews	i would love to have that block to play with....., does that oil pan clear an s13's sway bar and sub frame by chance? __________________ 4MationD! 90se RB26:build,95pgt KLZE swap:daily,92le vh45 swap planned

04-09-2011, 10:01 AM	#11
holemilk00 Nissanaholic! Join Date: Oct 2006 Location: Cape Coral, FL Posts: 2,486 Trader Rating: (33) Feedback Score: 33 reviews	they do depending on what mounts you use, I have an RB25 oil pan that I will sell too and that way it will clear even with low profile custom mounts. I have used these motors and mckinney mounts and it clears fine with the stock oil pan. __________________ I had a cool signature

04-11-2011, 01:25 PM	#13
holemilk00 Nissanaholic! Join Date: Oct 2006 Location: Cape Coral, FL Posts: 2,486 Trader Rating: (33) Feedback Score: 33 reviews	^^ I PMd you back with the shipping. Yes I can get more, they take close six months to get here and clear customs. How many more pics of the blocks do you want? __________________ I had a cool signature

04-11-2011, 06:04 PM	#15
holemilk00 Nissanaholic! Join Date: Oct 2006 Location: Cape Coral, FL Posts: 2,486 Trader Rating: (33) Feedback Score: 33 reviews	EVERYTHING IS SOLD. Congrats to the new owner Raife. I hope to see them built soon. And btw for all you lowballers, They were sold for asking price plus shipping which was an EXTREMELY good price. __________________ I had a cool signature

04-11-2011, 06:53 PM	#16
JdmGtDriver Zilvia FREAK! Join Date: Feb 2008 Location: Phillips Ranch/Diamond Bar Posts: 1,453 Trader Rating: (28) Feedback Score: 28 reviews	Nice congrats with the sale. Please let me know when you get more. I should have the funds by than. __________________ Dream to achieve!!!

04-11-2011, 07:25 PM	#18
Magical Trevor Zilvia Addict Join Date: Jun 2007 Location: Houston Posts: 610 Trader Rating: (8) Feedback Score: 8 reviews	So glad to see these gone

04-11-2011, 09:23 PM	#19
robert.huller Join Date: Apr 2011 Location: Fort Campbell, Kentucky, United States Posts: 45 Trader Rating: (0) Feedback Score: 0 reviews	holemilk, I am gonna get the money together as well. I know you said you can get more, does that include the head and the block?

04-11-2011, 09:24 PM	#20
holemilk00 Nissanaholic! Join Date: Oct 2006 Location: Cape Coral, FL Posts: 2,486 Trader Rating: (33) Feedback Score: 33 reviews	I can get more blocks. I actually bought the head off a member on zilvia here. __________________ I had a cool signature

04-28-2011, 09:29 PM	#21
hat1324 Join Date: Oct 2003 Location: texas Posts: 6 Trader Rating: (0) Feedback Score: 0 reviews	dont want to thread jack, but those of you still looking heres a decent resource that I've found. rbthirty.com About 1K to a local warehouse here in the DFW area after all the customs/fees/etc.. I've known a few people that have used them...