s13 sr20 wiring harness question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

TheEnd510 · 06-01-2011, 11:41 PM

So I did a sr20 swap into my 89 coupe. I plugged in every possible thing to the wiring harness that I could see. I am not getting any power to my coilpacks. No spark NADA!! Is there any advice to give a rookie? I been looking through the forums and alot of the links posted are out of date.

Any help welcome thanks.

nissansrdub · 06-04-2011, 12:35 AM

double check grounds and there was a brown connector right by the ecu under the right dash vent that i forgot to plug in at one time... and my valve cover was powder coated and it seemed there was coating over where the bolts to the coil packs bolted

06-01-2011, 11:41 PM	#1
TheEnd510 Join Date: May 2011 Location: Hayward, Ca Age: 40 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	s13 sr20 wiring harness question So I did a sr20 swap into my 89 coupe. I plugged in every possible thing to the wiring harness that I could see. I am not getting any power to my coilpacks. No spark NADA!! Is there any advice to give a rookie? I been looking through the forums and alot of the links posted are out of date. Any help welcome thanks.

06-04-2011, 12:35 AM	#2
nissansrdub Zilvia Junkie Join Date: Apr 2007 Location: Denver Colorado Posts: 500 Trader Rating: (3) Feedback Score: 3 reviews	double check grounds and there was a brown connector right by the ecu under the right dash vent that i forgot to plug in at one time... and my valve cover was powder coated and it seemed there was coating over where the bolts to the coil packs bolted