CA 400 whp track car part out - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

P-Funk alot · 07-09-2011, 08:49 PM

ok guys look i tried to sell it as a complete car but it didnt work out so if the motor set sells i will part the whole car out but the motor set has to sell first.

full 400 whp rb25 turn key swap i will not seperate any part from this set.
looking to get 5k OBO

so with that being said here are pics of the car complete and running so let me know guys. i am motivated but not deperate

rb25 series 1
apexi power fc and commander
d werks 750cc injectors
greddy intake mani
cx racing turbo mani
greddy bov
new turbo custom built by performance technique (full boost under 3500 rpm its crazy)
tial 38mm waste gate
aem wideband
blitz d-sbc
completely rebuilt head
tomei valve springs and retainers
also have tomei solid lifters
real nardi deep corn steering wheel
nrg quick disconnect and hub
z32 maf
q45 throttle body
full 5 lug conversion
z32 front calipers
z33 slotted and cross drilled track rotors
tein inner and outer tie rods
god speed coils with swift springs 10/8k (i like them better then my old teins)
all suspension arms are also godspeed
steel one piece drive shaft
syko mount kit motor and tranny (also have mckinney ones that will be thrown in)
wagner pads front and rear (thing stops on a dime)
50mm over fenders in the rear
20mm wide fenders in the front
act clutch good for 600 hp (thing is like an on and off switch grabs super hard)

leave you negative comments out of my thread everyone as different opinions.

here are some pics ill have more up tomorrow that are more current.

text me 909-763-0910

Nicelyphe · 07-09-2011, 08:54 PM

Bit interested in the cost on the overfenders for the front and rear, how do those hold up in weather conditions? Would be shipped to 18018. PM me, thank you. Also if the tails are for sale, let me know.

wanabedrftr · 07-09-2011, 08:54 PM

I'm interested in the skirts and rear bumper. Where are you located?

iggyspeed · 07-09-2011, 09:10 PM

Interested on wheels, seats, harness. Pm me prices whenever youre ready to part out.

driftage240 · 07-09-2011, 09:10 PM

iill take the hood lmk asap 818 851 8491 fixed!

iggyspeed · 07-09-2011, 09:36 PM

Quote:

Originally Posted by driftage240

iill take the hood lmk asap 818 851 841

Missing one more digit there sir.

waxball88 · 07-09-2011, 09:48 PM

Price for wideband

Joanne_Dub · 07-09-2011, 11:48 PM

I will pay freight for the entire rb set up with trans

armiller91 · 07-10-2011, 12:50 AM

interested in tails if you part out

Joanne_Dub · 07-10-2011, 01:15 AM

PM returned

Big Zee · 07-10-2011, 10:04 AM

z33 slotted and cross drilled track rotors
will these come with the brackets to hold the z32 calipers ?

how much for the set ? very interested

drifter_for_life06 · 07-10-2011, 06:22 PM

im interested in tail lights and center garnish as well if you part out. Im not first in line, so if these other guys flake, let me know

P-Funk alot · 07-11-2011, 10:20 AM

ok guys as of right now the motor set is pending if i recieve the deposit i will begin the part out of the rest of the car

Beejis60 · 07-11-2011, 10:32 AM

What seats do you have when/if parting?

JAStirrett · 07-11-2011, 10:41 AM

5 lug conversion shipped to 33716?

armiller91 · 07-11-2011, 10:43 AM

Quote:

Originally Posted by P-Funk alot

ok guys as of right now the motor set is pending if i recieve the deposit i will begin the part out of the rest of the car

Awesome, Hopefully It goes through.
Im still interested in the Tailights with Center

Also might be intersted in the AEM Wideband and the Suspension..
If you have replaced it, I would like everything but the Coilovers

Anyway please PM me if/when you get it sold so we can talk
Thanks

SLEEPYDUB · 07-11-2011, 11:33 AM

I am highly interested in the PFC.
Is it still available?

SoCaltC · 07-11-2011, 05:28 PM

Pm'd but forgot to ask if it also comes with the S13 > RB wire harness? I assume it does but just wanted to double check. Thanks.

P-Funk alot · 07-11-2011, 05:39 PM

yes it will be a turn key swap with everything needed for it to be running in your car

matthewAPM · 07-11-2011, 05:55 PM

I PM'd you about a ton of stuff I want to buy and need ASAP.

s14rb26 · 07-11-2011, 09:20 PM

Interested in the syko motor mount kit, does it come with downpipe. Is the kit for a Rb25 pm me a price will buy ASAP paypal ready

s14rb26 · 07-11-2011, 09:23 PM

Will the syko mounts fit a s14

P-Funk alot · 07-11-2011, 11:13 PM

yes it will fit s14 it uses the r33 crossmember i no longer have the down pipe as that was for the stock turbo set up yes it is for rb25. i am not gonna part with that from the motorset as i am including that in the sale but i do have a mckinney set i could sell you pm me

Joanne_Dub · 07-11-2011, 11:22 PM

Pm'd you. My phone is off so if u could text me 9512413205

Laotian240 · 07-12-2011, 12:06 AM

interested in front bumper pm price!

240zach · 07-12-2011, 02:47 AM

how much for tail light assembly?

GRNxS14 · 07-12-2011, 05:49 AM

Size and a price for the nardi?

P-Funk alot · 07-13-2011, 02:20 PM

nardi is 350mm deeo corn

brizzle3000 · 07-13-2011, 02:45 PM

do you have a turbo timer you want to sell?

P-Funk alot · 07-13-2011, 10:21 PM

ok guys buyers fell through need this motorset gone to begin partout

07-09-2011, 08:49 PM	#1
P-Funk alot Zilvia Addict Join Date: Sep 2009 Location: 909 Age: 39 Posts: 831 Trader Rating: (7) Feedback Score: 7 reviews	400 whp track car part out ok guys look i tried to sell it as a complete car but it didnt work out so if the motor set sells i will part the whole car out but the motor set has to sell first. full 400 whp rb25 turn key swap i will not seperate any part from this set. looking to get 5k OBO so with that being said here are pics of the car complete and running so let me know guys. i am motivated but not deperate rb25 series 1 apexi power fc and commander d werks 750cc injectors greddy intake mani cx racing turbo mani greddy bov new turbo custom built by performance technique (full boost under 3500 rpm its crazy) tial 38mm waste gate aem wideband blitz d-sbc completely rebuilt head tomei valve springs and retainers also have tomei solid lifters real nardi deep corn steering wheel nrg quick disconnect and hub z32 maf q45 throttle body full 5 lug conversion z32 front calipers z33 slotted and cross drilled track rotors tein inner and outer tie rods god speed coils with swift springs 10/8k (i like them better then my old teins) all suspension arms are also godspeed steel one piece drive shaft syko mount kit motor and tranny (also have mckinney ones that will be thrown in) wagner pads front and rear (thing stops on a dime) 50mm over fenders in the rear 20mm wide fenders in the front act clutch good for 600 hp (thing is like an on and off switch grabs super hard) leave you negative comments out of my thread everyone as different opinions. here are some pics ill have more up tomorrow that are more current. text me 909-763-0910 Last edited by P-Funk alot; 07-29-2011 at 10:05 AM..

07-09-2011, 08:54 PM	#3
wanabedrftr Zilvia Member Join Date: Jan 2011 Location: Orlando Age: 35 Posts: 259 Trader Rating: (0) Feedback Score: 0 reviews	I'm interested in the skirts and rear bumper. Where are you located? __________________ fifteen52 <3 wheels sales rep HMU

07-09-2011, 09:10 PM	#4
iggyspeed Join Date: Mar 2011 Location: Los Angeles Age: 38 Posts: 49 Trader Rating: (0) Feedback Score: 0 reviews	Interested on wheels, seats, harness. Pm me prices whenever youre ready to part out. __________________

07-09-2011, 09:10 PM	#5
driftage240 Post Whore! Join Date: Sep 2005 Location: TUJUNGA Age: 41 Posts: 2,869 Trader Rating: (23) Feedback Score: 23 reviews	iill take the hood lmk asap 818 851 8491 fixed! __________________ Misty blu is coming 4 you! Last edited by driftage240; 07-09-2011 at 09:53 PM..

07-10-2011, 12:50 AM	#9
armiller91 Leaky Injector Join Date: Jul 2011 Location: Albany, OR Age: 33 Posts: 141 Trader Rating: (9) Feedback Score: 9 reviews	interested in tails if you part out __________________ -1990 240sx Operation New Dawn 9/10-9/11

07-09-2011, 08:54 PM	#2
Nicelyphe Zilvia Addict Join Date: Jan 2010 Location: PA Posts: 918 Trader Rating: (16) Feedback Score: 16 reviews	Bit interested in the cost on the overfenders for the front and rear, how do those hold up in weather conditions? Would be shipped to 18018. PM me, thank you. Also if the tails are for sale, let me know.

07-09-2011, 09:48 PM	#7
waxball88 Zilvia FREAK! Join Date: Jun 2009 Location: Gainesville Posts: 1,061 Trader Rating: (9) Feedback Score: 9 reviews	Price for wideband

07-09-2011, 11:48 PM	#8
Joanne_Dub Join Date: Jul 2011 Location: savannah, ga Age: 34 Posts: 43 Trader Rating: (1) Feedback Score: 1 reviews	I will pay freight for the entire rb set up with trans

07-10-2011, 01:15 AM	#10
Joanne_Dub Join Date: Jul 2011 Location: savannah, ga Age: 34 Posts: 43 Trader Rating: (1) Feedback Score: 1 reviews	PM returned

07-10-2011, 10:04 AM	#11
Big Zee Zilvia Addict Join Date: Oct 2005 Location: BC Age: 40 Posts: 860 Trader Rating: (10) Feedback Score: 10 reviews	z33 slotted and cross drilled track rotors will these come with the brackets to hold the z32 calipers ? how much for the set ? very interested

07-10-2011, 06:22 PM	#12
drifter_for_life06 Zilvia Addict Join Date: Sep 2005 Location: New Freedom, PA Age: 36 Posts: 775 Trader Rating: (6) Feedback Score: 6 reviews	im interested in tail lights and center garnish as well if you part out. Im not first in line, so if these other guys flake, let me know __________________ RPS13: +.020" 2871r 264's AEM EMS http://enjukuracing.com/#_l_4s

07-11-2011, 10:20 AM	#13
P-Funk alot Zilvia Addict Join Date: Sep 2009 Location: 909 Age: 39 Posts: 831 Trader Rating: (7) Feedback Score: 7 reviews	ok guys as of right now the motor set is pending if i recieve the deposit i will begin the part out of the rest of the car

07-11-2011, 10:32 AM	#14
Beejis60 BANNED Join Date: Jul 2009 Location: in a house Posts: 564 Trader Rating: (4) Feedback Score: 4 reviews	What seats do you have when/if parting?

07-11-2011, 10:41 AM	#15
JAStirrett Zilvia Member Join Date: Jan 2011 Location: Riverview FL Posts: 189 Trader Rating: (0) Feedback Score: 0 reviews	5 lug conversion shipped to 33716?

07-11-2011, 11:33 AM	#17
SLEEPYDUB Zilvia Junkie Join Date: Feb 2011 Location: Shreveport, LA Age: 39 Posts: 446 Trader Rating: (11) Feedback Score: 11 reviews	I am highly interested in the PFC. Is it still available?

07-11-2011, 05:28 PM	#18
SoCaltC Leaky Injector Join Date: Mar 2007 Location: OC Posts: 67 Trader Rating: (0) Feedback Score: 0 reviews	Pm'd but forgot to ask if it also comes with the S13 > RB wire harness? I assume it does but just wanted to double check. Thanks.

07-11-2011, 05:39 PM	#19
P-Funk alot Zilvia Addict Join Date: Sep 2009 Location: 909 Age: 39 Posts: 831 Trader Rating: (7) Feedback Score: 7 reviews	yes it will be a turn key swap with everything needed for it to be running in your car

07-11-2011, 05:55 PM	#20
matthewAPM Zilvia Member Join Date: Mar 2010 Location: GA Posts: 194 Trader Rating: (1) Feedback Score: 1 reviews	I PM'd you about a ton of stuff I want to buy and need ASAP. __________________ iTrack Motorsports GTA Street RWD Miata #5

07-11-2011, 09:20 PM	#21
s14rb26 Join Date: Jul 2011 Location: el paso Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Interested in the syko motor mount kit, does it come with downpipe. Is the kit for a Rb25 pm me a price will buy ASAP paypal ready

07-11-2011, 09:23 PM	#22
s14rb26 Join Date: Jul 2011 Location: el paso Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Will the syko mounts fit a s14

07-11-2011, 11:13 PM	#23
P-Funk alot Zilvia Addict Join Date: Sep 2009 Location: 909 Age: 39 Posts: 831 Trader Rating: (7) Feedback Score: 7 reviews	yes it will fit s14 it uses the r33 crossmember i no longer have the down pipe as that was for the stock turbo set up yes it is for rb25. i am not gonna part with that from the motorset as i am including that in the sale but i do have a mckinney set i could sell you pm me

07-11-2011, 11:22 PM	#24
Joanne_Dub Join Date: Jul 2011 Location: savannah, ga Age: 34 Posts: 43 Trader Rating: (1) Feedback Score: 1 reviews	Pm'd you. My phone is off so if u could text me 9512413205

07-12-2011, 12:06 AM	#25
Laotian240 Zilvia Member Join Date: Mar 2011 Location: ROWLAND HEIGHTS Posts: 259 Trader Rating: (7) Feedback Score: 7 reviews	interested in front bumper pm price!

07-12-2011, 02:47 AM	#26
240zach Zilvia Addict Join Date: Sep 2010 Location: 916 Posts: 941 Trader Rating: (10) Feedback Score: 10 reviews	how much for tail light assembly?

07-12-2011, 05:49 AM	#27
GRNxS14 Zilvia Junkie Join Date: Jun 2007 Location: Cincinnati Age: 36 Posts: 357 Trader Rating: (14) Feedback Score: 14 reviews	Size and a price for the nardi? __________________ RB26 S14 Kouki

07-13-2011, 02:20 PM	#28
P-Funk alot Zilvia Addict Join Date: Sep 2009 Location: 909 Age: 39 Posts: 831 Trader Rating: (7) Feedback Score: 7 reviews	nardi is 350mm deeo corn

07-13-2011, 02:45 PM	#29
brizzle3000 Zilvia Junkie Join Date: Jan 2011 Location: Philadelphia Age: 33 Posts: 523 Trader Rating: (10) Feedback Score: 10 reviews	do you have a turbo timer you want to sell?

07-13-2011, 10:21 PM	#30
P-Funk alot Zilvia Addict Join Date: Sep 2009 Location: 909 Age: 39 Posts: 831 Trader Rating: (7) Feedback Score: 7 reviews	ok guys buyers fell through need this motorset gone to begin partout