need help to rebuilt 300zx brake calipers(F) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

mutkung · 12-30-2003, 04:35 PM

hello, I'm kinna new here
can any body give me any advice about how to rebuilt a 300zx calipers(F) i got it from EBAY. it was already dissassembled, so all i have to do is out it together

if you can give me a link to any webside that might be helpful will be really great

thx247 · 12-30-2003, 05:55 PM

the picture just shows the pads and shims. Is that the part thats not assembled?

Loofee95SE · 12-30-2003, 09:49 PM

I'm quoting For my brother;
" The caliper is tatally disassembled, i just need the spec like How many lbs torque is needed."
I do have some Machanical knowledge..and can re-assembled it back with no prob...I just need some advice from those who done this b4, for some tips..

or maybe some body here can point me to some write-up
about a How-to rebuilt 300zx Caliper.. thanks in advance
C

**mrmephistopheles** · 12-30-2003, 11:15 PM

amazing what one minute and Google will get you...
http://www.twinturbo.net/ttnettech/c...errebuild.html

mutkung · 12-31-2003, 03:42 PM

thank you , this will help alot

12-30-2003, 04:35 PM	#1
mutkung Leaky Injector Join Date: Feb 2003 Location: AL Age: 42 Posts: 136 Trader Rating: (0) Feedback Score: 0 reviews	need help to rebuilt 300zx brake calipers(F) hello, I'm kinna new here can any body give me any advice about how to rebuilt a 300zx calipers(F) i got it from EBAY. it was already dissassembled, so all i have to do is out it together if you can give me a link to any webside that might be helpful will be really great

12-30-2003, 05:55 PM	#2
thx247 Zilvia FREAK! Join Date: Jan 2003 Location: bay area Posts: 1,455 Trader Rating: (0) Feedback Score: 0 reviews	the picture just shows the pads and shims. Is that the part thats not assembled?

12-30-2003, 09:49 PM	#3
Loofee95SE Zilvia Junkie Join Date: Mar 2002 Location: Gadsden, AL Posts: 357 Trader Rating: (0) Feedback Score: 0 reviews	I'm quoting For my brother; " The caliper is tatally disassembled, i just need the spec like How many lbs torque is needed." I do have some Machanical knowledge..and can re-assembled it back with no prob...I just need some advice from those who done this b4, for some tips.. or maybe some body here can point me to some write-up about a How-to rebuilt 300zx Caliper.. thanks in advance C

12-30-2003, 11:15 PM	#4
mrmephistopheles Magnanimous Justice Distribution Service Join Date: Mar 2002 Location: BFE Age: 23 Posts: 14,372 Trader Rating: (9) Rides Gallery: mrmephistopheles Feedback Score: 9 reviews	amazing what one minute and Google will get you... http://www.twinturbo.net/ttnettech/c...errebuild.html

12-31-2003, 03:42 PM	#5
mutkung Leaky Injector Join Date: Feb 2003 Location: AL Age: 42 Posts: 136 Trader Rating: (0) Feedback Score: 0 reviews	thank you , this will help alot