What Spec Wheels Does Everyone Have?

[brianglawson]

Ok to unclutter the forum and help on peoples questions on fitment of wheels, im starting this thread for people to post what size/offset wheels they have and if they clear there brake setup(if not stock) and if it clears their suspension(if not stock). I think this would be a good way to do it, post pics too if at all possible, this should help everyone.....

ill start with my temporary wheels.......
Old School 280zx Turbo Swastikas 15x6 +12 offset
They wont clear z brakes but they would coilovers

[russian]

Fn01r-c 5zigen's 17*8 +35

[Red Comet X]

Stocky Stock

[memphiss13]

Originally Posted by russian

Fn01r-c 5zigen's 17*8 +35

any side pics of your car? i want to see how close they are to the edge of the fender.

[russian]

Originally Posted by rookie2nr

any side pics of your car? i want to see how close they are to the edge of the fender.

here. hmm this message is too short

[Siizzzoooo]

5Zigen FN01R 17x8s +35mm all around with 225/45 tires
Clears Eibach Sportlines on KYB AGXs just fine

[nightwalker]

ugly poo-poo 15x7 wheels +10 offset though. 195/55/15 Works fine for me. Clears my coilovers, but I don't know if they will clear Z brakes. I'll find out soon enough.

[Rennen]

Great Thread! this could be a valuable resource if everyone posts their wheel fitment.

All I can contribute is '02 Nissan Sentra SE-R SpecV wheels 17x7 +47ish offset.



worse brake clearance than stock 7 spokes, also less suspension clearance.

-Matt

[toreno]

check the Sig

[DoriftoSlut]

R33 GTR 17x9 +30 (will clear Z/R32.3.4 brakes, etc..) (WILL NOT clear JIC FLT-A2 without 5mm spacer).
FN01RC 17x9 +15 (everything)

WHAT I RUN, since it is different:

17x9 +10 (20mm spacer on GTR wheels, 5mm on FN01RCs) all around
215/40/17 F
215/45/17 R, sometimes 225/45/17 (on the UGLYASS 5Zigens)

This is on PS13 COUPE (yeah thats right... 180sx what?) with stock fenders (rolled and slightly pulled)

GOOD pics will be posted once i take them. Old pics suck cause its not this current setup (diff. tire sizes).

[LanceS13]

Borbet Type-T
16x7.5"
+35 offset
19lbs. (heavy!)
225/50/16 Victoracers
clears stock brakes, should clear Z brakes just eyeing it.
clears stock shocks by 1cm.

[240Degrees]

15x7.5 0 OFF enkei mesh BALEEDAT! sorry i dont have a better pic on imagestation right now.

and

15x6 +30 OFF s12 200sx

both clear coilovers nicely.

[nokeone]

17x9 +15 FN's...yeah yeah...fuck you if you don't like them mr K..lol ...they are CHEAP CHEAP...that is what matters...

[Zemus]

I have 15x7 Black 5star American Racing with +35 offset (which I am giving to my gf to put on her 240)
I have some 15x7 Riken Meshs with a 0 offset, I have some crazy oldschool 15x7 with a -2 offset, Ill get pics ones summer comes, Also all my wheels clear coilovers, but non of them clear the brakes. Ill more than likley get some K1s for the front if I ever get bigger brakes, and just rock a spacer.

[Dousan_PG]

16x7 0 offset 205/45/16 (i forget) and 215/45/16
clears coilovers, not zbrakes due to being a mesh w/ lip...spoke design


before camber


15x7 +27 kosei K1 205/55/15
clears coilvoers AND z brakes, no spacer
rear is 15x6.5 +14 or so clears coilovers, not z brakes 205/55/15

weeeeeeeeeeee

15x7.5 +17. needed 30mm spacer to clear z brakes well. cleared coilovers w/o spacer 205/55/15


rear is same as previous


damn my 'sleepy eyes' look sooo gay that high! haha
front is 15x7 +27 kosei k1...same as before
rear is 15x7.5 +17 ..same as before




front kosei k1
rear ssr longchamp xr-4 15x7.5 +5
clears coilovers NOT zbrakes 205/55/15




rear is 15x7 +15 SSR Reverse Mesh clears coilvoers NOT zbrakes 205/55/15


blitz type 03 17x8 +28 215/45/17
WILL NOT clear coilvoers/zbrakes (in this offset)
used 20mm spacer

i cant find more pics..super sunk. blah

front
demon camber 205/55/16
16x8 -15 (yes negative 15)
will clear coilovers and z brakes (thanks for the loan sam--jspec.com)

rear is same as before (blitz 17")

wide fenders REQUIRED




and where im at now

17x9 +15 5Zigen Fn01rc 215/45/17 clears coilovers and brakes

[brianglawson]

damn dousan all those sexy meshes and especially the longchamps...mmm gotta love the old school rims...

[Dousan_PG]

they are cool if you want to keep that old look (zenki/chuuki)
personally i like the modern look....soo out w/ the mesh 15s...

all those wheels have been owned over the period of 1.5 years! so many wheels, so little time. i also had a set of z32 wheels and some more steelies, and SE wheels as well as some other mesh ones..haha..too much
i have 6 FN01rc 17x9 +15 and more wheels coming up soon..

[sykikchimp]

Nismo LM-GT2

front: 17x8 +35 215/45-17 (less than finger width b/w tire and spring. Would not clear coilovers with a wider tire.)
Rear: 17x9 +38 215/45-17 (can fit my entire hand b/w tire and spring.)
clears z-brakes.

[brianglawson]

i cant wait to see your car when its painted and stuff man, its gonna be sexy

[FastBack 240]

17x7 O.Z. Superleggera's

[Red]

Work wheels... 18x8.5 +32 front... 18x10 +40 rear... I have RS*R's and AGX clears with a bit of room... Ohh and 235-40-18's front and 265-35-18 rear...

I'm guna buy the Tein flex and pull my fenders to add some spacers... Or just get new wheels. Thats a later mod... turbo next

EDIT: Forgot to add... This is on a 240sx-se S14

[CleanS14]

Stern Face II Beast 18x8.5, 18x9.5 (offsets to be determined soon) Sorry I just don't know the offsets because I had the centers swapped...

[DoriftoSlut]

Dirty D, you forgot to say that in most of those pics you were running a (30mm?) spacer with your Kosei's. 15x7 +27 is not that FLUSH even though it clears brakes and coils...

And also, you have 17x9 +10 (copycat) up front right now. 5mm spacer cause Tein HE's have teh suck collar design...

Man, do i have to do eveything for you?

[nokeone]

Originally Posted by DoriftoSlut

And also, you have 17x9 +10 (copycat) up front right now. 5mm spacer cause Tein HE's have teh suck collar design...

weird...my FN's didn't rub on my HEs..

[Dousan_PG]

Originally Posted by nokeone

weird...my FN's didn't rub on my HEs..

because your car isnt as low as mine

[nokeone]

Originally Posted by Dousan_PG

because your car isnt as low as mine

really?..hmm..at what height does it start rubbing?..i'll have to look into it..cause on my next coupe i was planning on slamming the shit outta it to tuck the FNs...

[Heartwork]

Gram Lights 57S
17x8.5 +22 215-40-17
17x9.5 +22 235-40-17






Works S1C
18x9 +20 225-40-18
18x10 +13 245-40-18

rolled fenders up front
pulled fenders in rear

[hybrid_eg]

Mine are i believe Riken Mesh or Enkei Type 88, 15x7.5 not quite sure how to tell the difference with +15 offset..


I'm looking for the same identical wheels in 16x8 +0 Offset.. if you know someone let me know, tks

[Zemus]

Originally Posted by hybrid_eg

Mine are i believe Riken Mesh or Enkei Type 88, 15x7.5 not quite sure how to tell the difference with +15 offset..


I'm looking for the same identical wheels in 16x8 +0 Offset.. if you know someone let me know, tks

Those are Riken Mesh's and their 15x7, I have the same in 0 offset, lovin em, but mine will be gold, well once i paint them

[hybrid_eg]

Originally Posted by Zemus

Those are Riken Mesh's and their 15x7, I have the same in 0 offset, lovin em, but mine will be gold, well once i paint them

Cool, thanks for info ZEMUS, i'm pretty sure they made them in 16 since my friend has them but his offset is like 32.. weak lip.. i think his are 16x8 just the size i'm looking for with 0 offset.. where did you get yours if you dont mind me asking? The 16's i want to get i will probably powdercoat gold.. and of course i'm never selling these 15's hehehehe