What all do i need?

[crazeddriver]

Ok i know that this has been posted ALOT of times but i was having trouble trying to find out what i needed so here it goes.

I have found a j30 at the junk yard. I know that it isn't a direct bolt in to the s13(thats what i got) but what do i need to get it in there? Also i heard that the 96 and up don't need any modification it just drops right in there?

[Ghettokracker71]

What year is the J30? What year is yo' junk....I assume its an S13

[crazeddriver]

i didn't catch what year the j30 was and mine is a 91

[Ghettokracker71]

Originally Posted by crazeddriver

i didn't catch what year the j30 was and mine is a 91

well,that can be pretty important....the year of the J30 that is

[ryan hagen]

for the earlier j30's u just swap the rear cover and use the j30 c/v's
i used a 300zx diff which is almsot identicale to a j30 and swaped the rear cover and used j30 c/vs and i was fine, you ll need to use somekinda spacer or washers to put on the front carrier bolts cause they mount witha bushing on z's and s14's and i think j30's also

check
www.lakesidep.tk and go to how toos i did one on putting my diff in and what i used for spacers etc.

[Ghettokracker71]

Originally Posted by ryan hagen

for the earlier j30's u just swap the rear cover and use the j30 c/v's
i used a 300zx diff which is almsot identicale to a j30 and swaped the rear cover and used j30 c/vs and i was fine, you ll need to use somekinda spacer or washers to put on the front carrier bolts cause they mount witha bushing on z's and s14's and i think j30's also

check
www.lakesidep.tk and go to how toos i did one on putting my diff in and what i used for spacers etc.

wow I'm lost.....lol....I wish somebody made LSD bolt-on kits,you tell them what LSD you have,they give you a kit(like LSD oil,bolts,rear diff gasket,diff cover,tell you what output shafts you need...or you can buy them for $xx more)