OH Ca18det twinscroll turbo manifold for a EVO8 turbo - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

slw240sx · 07-26-2012, 04:58 PM

This came off my personal car, it was ran for about 3 years. It was built to run a EVO8 stock turbo. The manifold was made from 304SS weld L's it has never cracke. I designed it to be a twinscroll manifold to take advantage of the divided turbo housing. The head flange is segmented and seals well on the cylinder head, the turbo flange is also surfaced flat and seals great. This is a nice cheap way to get a budget 350-380Hp setup on a mildly built CA18det

Email me at [email protected], or shoot me PM's.

thanks

Jon

07-26-2012, 04:58 PM	#1
slw240sx Zilvia.net Advertiser Join Date: Apr 2003 Location: Dayton Ohio Age: 43 Posts: 545 Trader Rating: (4) Feedback Score: 4 reviews	Ca18det twinscroll turbo manifold for a EVO8 turbo This came off my personal car, it was ran for about 3 years. It was built to run a EVO8 stock turbo. The manifold was made from 304SS weld L's it has never cracke. I designed it to be a twinscroll manifold to take advantage of the divided turbo housing. The head flange is segmented and seals well on the cylinder head, the turbo flange is also surfaced flat and seals great. This is a nice cheap way to get a budget 350-380Hp setup on a mildly built CA18det Email me at [email protected], or shoot me PM's. thanks Jon __________________ http://www.forcedfabllc.com/