|
|
|
05-09-2013, 06:13 PM
|
#1 |
|
Join Date: Nov 2008
Location: San Francisco
Age: 34
Posts: 34
Trader Rating: (1)
 Feedback Score: 1 reviews
|
95 S14 KA-T built TONS of parts
SF BAY AREA
        I have a 1995 240sx (s14) KA24DE-T With 16,xxx miles on a fresh rebuild. I have no time or place to tear this motor down and fix it. I would love to sell as a whole but if someone is willing to buy a lot of parts I will start parting it out. My machinist screwed me on the decking and bore job so it is currently burning oil and I have slapped a new head gasket in there, but you will pretty much need a new block. Car runs All other parts are in perfect condition. Engine parts include: JGS precision Turbo Kit with an AGP/Turonetics .68 trim T3/T4. JGS Wastegate with dump tube plumbed into Megan down pipe. Isis Intercooler HKS SSQV limited edition black (comes with recirc fitting) Brian Crower Stage 2 rods CP Pistons Brand New Cometic MLS head gasket ARP Head Studs and Nuts Brian Crower Stage 2 Cams Jim Wolf Technology Cam Gears SARD 850CC Injectors Aeromotive style fuel pressure regulator Walbro Fuel Pump N62 Maf Custom cut Dinan E36 intake pipe HKS 200mm Pop Charger (with brand new 3 layer filter) Greddy Profec B Spec 2 Boost Controller JWT Ecu tune for all parts listed Grex (Greddy) Thermostatted oil cooler adapter HKS Hi-Power Exhaust Koyo Radiator Brand new Distributor (<100 miles) Brand new spark plug wires (<100 miles) Brand new Spec Flywheel (allows use of SR or KA clutch) (<3000 miles) Brand new Spec Stage 3+ SR clutch (bigger than KA)(<3000 miles) Oem Clutch damper deleted Brand new OEM rear main seal (not installed) 5speed Transmission (grinds 3rd and 5th) B&M Shifter (have brand new OE shifter plate gasket) Have super rare 160MPH cluster AEM analog A/F meter DEFI BF Link gauges ( have controller II, Boost, and oil pressure gauges) J30 VLSD and 5 bolt axles Suspension Parts: K-Sport coilovers Isis RUCA, Traction Bars and torsion bars Peak inner tie rods Tein outer tie rods with angle spacers MB Battle wheels 7x9.5 all around PBM spacer kit (only running light spacer upfront) Poly Urethane Steering Rack bushings JDM Skyline 4 piston 32mm aluminum front brake calipers Z32 32mm Disks JDM Skyline rear 2 piston calipers Z32 rear drum e brake setup Z32 rear brake disks Skyline rear e brake cable Agency Power stainless steel brake lines Interior : Viper 2 way pager alarm with backup battery (stealth installed, not under the drivers dash) Nardi Classic Leather steering wheel NRG Carbon Fiber quick release Carbon fiber radio surround Carbon fiber A/C bezel ATI gauge pod on steering column holds EGT and Boost gauges Carbon Fiber door card gauge pod holds AEM gauge 2 Defi gauges mounted ontop of my cracked dash SMD LED dome light Trunk is gutted and a little rust No radio/speakers E36 BMW Power wire (battery in trunk) BMW Power distribution block and jump pole (in hood) Exterior: Primer gray Passenger door is off color Right rear quarter panel is dented in Roof is fading a little Front bumper unpainted seen better days Rear bumper zip tied Really have to see this car in person to make an accurate offer. Please don't low ball me or make me an offer on the phone. Must see it first. Like I said I know I am missing stuff but give me a call or email and we can talk. More pictures upon request. Have receipts for all parts listed. Email or call/text Thomas (415)seven 9 three - 50 three nine I DO NOT WANT YOUR STREETBIKE, and I really don't want to repeat everything listed here, but I will go into depth if you have any specific questions about parts. Open for close offers, but don't lowball me, i will not take 4 grand. All these parts are quality and I paid over $10,000 to build this engine. Last edited by ZenkiTC; 05-18-2013 at 03:16 AM.. Reason: added pictures |
|
|
| Sponsored Links |
|
05-21-2013, 01:31 AM
|
#5 |
|
Join Date: Nov 2008
Location: San Francisco
Age: 34
Posts: 34
Trader Rating: (1)
Feedback Score: 1 reviews
|
Willing to remove parts to meet a price, and also willing to part out majorly. I will pull the motor and sell just that or pull it and sell just the roller. Don't pm me asking for 1 or 2 parts like wheels and fuel pump. It is going to need to be able to roll as long as it has majority of its parts. Seriously, hit me up and we'll work something out. Worst case scenario I say no.
Willing to ship reasonably sized items |
|
|
|
|
05-28-2013, 12:22 AM
|
#10 |
|
Zilvia Addict
 |
Free Bump for seller
4k for this car is a steal. Even if the chassis is shite the new owner could invest in a good shell, move everything over and be balling. I'd be all over this if I didn't have a near identical setup. Somebody buy this whole and rock it Ch Sent using XT912 M |
|
|
|
|
05-28-2013, 12:40 AM
|
#12 | |
|
Zilvia Addict
|
Quote:
Ch Sent using XT912 M |
|
|
|
|
 |
| Bookmarks |
|
|
!!! lmk
Hybrid Mode
