Fitment help? S13 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Khoda · 05-23-2013, 02:43 AM

Hey guy, don't really post on here just read a lot I hope I posted in the right place. Just want a little fitment help because I am stuck...

Car -s13
Fenders ( have not bought them yet)
Front-50
Rear -50
Or
Front -30
Rear -50

Looking to run 19x11 in the front et 8
Looking to run 19x12.5 in the rear et-12

currently running
17x9.75
Stock fenders rolled in front and pulled in the rear
22mm spacer in front 32mm in the back

The current size is just an idea so you understand I have no problem doing the work to make them fit. But I would like to stay away from tubing the front end and keep the camber down if possible ( lol )

Thanks! Looking forward to your guys responses!

alexanderig · 05-23-2013, 03:04 AM

There is a fitment question thread...........

Khoda · 05-23-2013, 03:06 AM

Quote:

Originally Posted by alexanderig

There is a fitment question thread...........

Dang I looked and couldn't fine it. Sorry about that ( if this can be moved that would be greatly appreciated)

Thanks!

Khoda · 05-23-2013, 01:42 PM

Any fitment guys? Have any opinions?

Also car will be slammed as much as possible on Megan coils. Currently is slammed with collors all off front and back!

vehicle336 · 05-24-2013, 03:27 PM

Quote:

Originally Posted by Khoda

Any fitment guys? Have any opinions?

Also car will be slammed as much as possible on Megan coils. Currently is slammed with collors all off front and back!

Remember, you're trying to jump on the bandwagon, not over it.

Nissan206 · 05-23-2013, 02:16 PM

http://zilvia.net/f/chat/392494-whee...on-thread.html

Khoda · 05-23-2013, 02:19 PM

Thank you!

PeaceOnesxWai · 05-23-2013, 06:15 PM

Theres no way you can run 19s in the front.. 18 by 10s will need tubs already

Khoda · 05-23-2013, 06:32 PM

Even with 30mm fenders and -3 camber?

PeaceOnesxWai · 05-23-2013, 06:38 PM

Your wheels will need to turn.. so no mater what your going to hit the fender wells. It will tuck under, but its gonna look stupid big.

This is one of a very few samples of good 18/19s set up on a S13

Khoda · 05-23-2013, 06:44 PM

Damn, it's hard to find a good set of used 19/18 setup.
So 19 in front is a no go.

Mitsubayati · 05-23-2013, 07:11 PM

You're trying to fit those ABC Exclusives aren't you?

Khoda · 05-23-2013, 07:41 PM

Yesssssir I am

Khoda · 05-23-2013, 08:21 PM

Pics didnt load

*fliprayzin240sx* · 05-23-2013, 09:49 PM

I answered your question and you'd honestly be a retard trying to run 19x11s up front of an S13. Even I wouldnt try that shit under a larger wheel well'd S14.

240boi115 · 05-23-2013, 10:51 PM

11 inches up front????!!!!!? daaaang! someone wants to never slide in his life! why not 18x8.5 up front and 18x10 in rear? at the right height it looks nice and is functional! ^.^

Khoda · 05-24-2013, 12:37 AM

These are not for sliding! Just for a DD I have something els for sliding :]
With that said will they work for a DD? Haha

*fliprayzin240sx* · 05-24-2013, 09:43 AM

If you dont plan on making U-turns or making any tight turns, 11s are fucking perfect. Figured thats what you do with DD's, you just drive straight...

240boi115 · 05-24-2013, 01:55 PM

honestly even with a dd 8-8.5 up front is fine man...are you afraid that your car will just slide out of control if you dont have massive wheel sizing up front?? lol if you rocked 11's you would need some serious front fenders to fill that ugly fitament youll have.

OBEEWON · 05-24-2013, 02:31 PM

19's up front will suck. Tubs don't help. You are still going to hit arms and rails.

I have a set of 18/10 and 19x11 Work Equips for sale, I think 18's all around would suit you best in those widths though.

OBEEWON · 05-24-2013, 02:36 PM

This is pretty nasty but not really near the same specs up front you are going for. 18x9.5/19x11

racepar1 · 05-24-2013, 03:33 PM

Quote:

Originally Posted by Khoda

Looking to run 19x11 in the front et 8
Looking to run 19x12.5 in the rear et-12

Pick ANY diameter wheel you want you're going to have SERIOUS subbing issues with those specs. It doesn't matter if it's a 15" wheel or a 19" wheel, it's going to rub somewhere on the chasis/suspension. The bottom line here is if you have to ask this question, you're fucked. I have no idea why you would buy 19's for a 240 anyways, ESPECIALLY such aggressive ones. That's like chrome clown shoes on a midget.

Quote:

Originally Posted by OBEEWON

This is pretty nasty but not really near the same specs up front you are going for. 18x9.5/19x11

That stance looks like shit, the 19's ruin it. The front stance/fitment looks nice, but the rear looks like saggy boobies. It would look better if the rear wasn't lower than the front and the rear overfenders were trimmed to not look like saggy boobs.

***enkei2k*** · 05-24-2013, 10:55 PM

Quote:

Originally Posted by alexanderig

There is a fitment question thread...........

Quote:

Originally Posted by Nissan206

http://zilvia.net/f/chat/392494-whee...on-thread.html

yes please, thanks.

05-23-2013, 02:43 AM	#1
Khoda Leaky Injector Join Date: Nov 2012 Location: The Bay Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	Fitment help? S13 Hey guy, don't really post on here just read a lot I hope I posted in the right place. Just want a little fitment help because I am stuck... Car -s13 Fenders ( have not bought them yet) Front-50 Rear -50 Or Front -30 Rear -50 Looking to run 19x11 in the front et 8 Looking to run 19x12.5 in the rear et-12 currently running 17x9.75 Stock fenders rolled in front and pulled in the rear 22mm spacer in front 32mm in the back The current size is just an idea so you understand I have no problem doing the work to make them fit. But I would like to stay away from tubing the front end and keep the camber down if possible ( lol ) Thanks! Looking forward to your guys responses!

05-23-2013, 02:16 PM	#6
Nissan206 Leaky Injector Join Date: Feb 2012 Location: WA(206) Posts: 138 Trader Rating: (11) Feedback Score: 11 reviews	http://zilvia.net/f/chat/392494-whee...on-thread.html __________________

05-23-2013, 07:11 PM	#12
Mitsubayati Zilvia FREAK! Join Date: Aug 2007 Location: The Dro Posts: 1,424 Trader Rating: (18) Feedback Score: 18 reviews	You're trying to fit those ABC Exclusives aren't you? __________________

05-23-2013, 09:49 PM	#15
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	I answered your question and you'd honestly be a retard trying to run 19x11s up front of an S13. Even I wouldnt try that shit under a larger wheel well'd S14. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

05-24-2013, 09:43 AM	#18
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	If you dont plan on making U-turns or making any tight turns, 11s are fucking perfect. Figured thats what you do with DD's, you just drive straight... __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

05-23-2013, 03:04 AM	#2
alexanderig Zilvia Addict Join Date: Feb 2010 Location: Miami Age: 34 Posts: 644 Trader Rating: (4) Feedback Score: 4 reviews	There is a fitment question thread...........

05-23-2013, 01:42 PM	#4
Khoda Leaky Injector Join Date: Nov 2012 Location: The Bay Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	Any fitment guys? Have any opinions? Also car will be slammed as much as possible on Megan coils. Currently is slammed with collors all off front and back!

05-23-2013, 02:19 PM	#7
Khoda Leaky Injector Join Date: Nov 2012 Location: The Bay Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	Thank you!

05-23-2013, 06:15 PM	#8
PeaceOnesxWai Zilvia FREAK! Join Date: Mar 2010 Location: SoCal Age: 33 Posts: 1,220 Trader Rating: (34) Feedback Score: 34 reviews	Theres no way you can run 19s in the front.. 18 by 10s will need tubs already

05-23-2013, 06:32 PM	#9
Khoda Leaky Injector Join Date: Nov 2012 Location: The Bay Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	Even with 30mm fenders and -3 camber?

05-23-2013, 06:38 PM	#10
PeaceOnesxWai Zilvia FREAK! Join Date: Mar 2010 Location: SoCal Age: 33 Posts: 1,220 Trader Rating: (34) Feedback Score: 34 reviews	Your wheels will need to turn.. so no mater what your going to hit the fender wells. It will tuck under, but its gonna look stupid big. This is one of a very few samples of good 18/19s set up on a S13

05-23-2013, 06:44 PM	#11
Khoda Leaky Injector Join Date: Nov 2012 Location: The Bay Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	Damn, it's hard to find a good set of used 19/18 setup. So 19 in front is a no go.

05-23-2013, 07:41 PM	#13
Khoda Leaky Injector Join Date: Nov 2012 Location: The Bay Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	Yesssssir I am

05-23-2013, 08:21 PM	#14
Khoda Leaky Injector Join Date: Nov 2012 Location: The Bay Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	Pics didnt load

05-24-2013, 12:37 AM	#17
Khoda Leaky Injector Join Date: Nov 2012 Location: The Bay Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	These are not for sliding! Just for a DD I have something els for sliding :] With that said will they work for a DD? Haha

05-24-2013, 02:31 PM	#20
OBEEWON Post Whore! Join Date: Feb 2006 Location: Hightened State of Emergency Posts: 6,053 Trader Rating: (9) Feedback Score: 9 reviews	19's up front will suck. Tubs don't help. You are still going to hit arms and rails. I have a set of 18/10 and 19x11 Work Equips for sale, I think 18's all around would suit you best in those widths though. __________________

05-24-2013, 02:36 PM	#21
OBEEWON Post Whore! Join Date: Feb 2006 Location: Hightened State of Emergency Posts: 6,053 Trader Rating: (9) Feedback Score: 9 reviews	This is pretty nasty but not really near the same specs up front you are going for. 18x9.5/19x11 __________________