GA PART OUT ProAM S13 VERT/APEXI/VQ35 swap/VOLK/COSMIS/AERO/SPARCO/KNUCKLES/MORE!

[dil han]

Name: Dylan Crumley
Location: North GA
Contact: Call, text, PM or e-mail. 770-seven1four-0134 [email protected]
Title: Clean GA title in my name
Payment type: Cash or paypal

Chassis: $4500 rolling on stock suspension and brakes

1993 Nissan 240sx convertible NO RUST!. Weighed 2560 lbs fully assembled
New base/clear scion Xb paint/ Murasaki aka purple
VIS front and rear wide body
VIS super made body kit
TRA rocket bunny wing, real
350z side view mirrors
Stripped and shaved chassis work
Interior painted black
Tube front and rear frame with crash bars
2014 formula drift/pro am spec cage 1.75" tube/ .120 wall
Lexan windshield
Sparco trunk latches
Aeromotive stealth 6.1 gallon fuel cell, internal pump can support 600hp I believe.
-6 AN hose, fittings and Moroso filters for breather/roll over tubes
Moroso hood pins
Custom aluminum side mount seat bracket for driver side
G force weld on quick release
Custom steering column with 3/4 DOM .120 tube, built in safety in case subframe is pushed back in a wreck.
Hydro ebrake mounting location on side of trans tunnel. Welded 3/16" steel
350z dash
350z clutch pedal assembly, 350z brake pedal
350z gauge cluster with auto meter gauges molded in
Auto meter pro comp rpm, water temp and oil psi
Moroso switch panel
Countersteer Motoring race car body harness. Fully hand built, 3 wires running from the dash to the rear only and 4 wires other than engine harness running forward of the dash.
14 lb Shurken battery
Custom battery mount with 1/8' steel plate, FD legal
Moroso alternator relay
Moroso battery kill switch
LED front and rear brake light strip
Rear fire wall panel
Countersteer Motoring tucked brake lines in engine bay
300zx brake master cylinder
S13 brake booster painted wrinkle black
Crazy bright head light bulbs
High density roll cage foam
G force 4 panel rear view mirror
Rear subframe collars


VQ35DE engine and trans: $2300

2004 Nissan 350z vq35de with 85,000 miles when swapped in a year ago from a automatic. ZERO LEAKS, DOES NOT BURN OIL, PERFECT!
Tomei cams
Tomei springs and retainers
Competition clutch stage 4
Competition clutch light flywheel

Suspension and brakes:
Front and rear (S14) 5 lug with Arp extended studs $350
300zx aluminum front brakes, rotors, and stainless braided brake lines $200


Exterior/interior:
Sparco Evo seats $360 each one has hole size of a dime
Sparco steering wheel $150
Gforce 4 point harness $120

Other:
J30 VLSD WELDED, casing has been wire wheeled, painted black, 180sx high fluid capacity diff cover, new output shaft seals, steel tab removed for better exhaust clearance, and solid diff bushings $200
Weapon R coolant over flow tank, modified to work properly. $50
Countersteer Motoring 3.5" aluminum catback exhaust. S13 chassis $300

Wheels/tires:

Cosmis Racing XT-005R 18x10 +20 x2 rear spares $400



Here is a link to a video and more of the car in action. This video is from when the fans broke so I ran no hood in the heat of Orlando FL.
https://www.youtube.com/watch?v=FyXu_HsYgbY

[/URL]

[jbjslambert]

Bump. I have seen this car close up and its nice!!

why you selling it?

[RNGWLD]

Have an s13 just on coils and adjustable tension rods up front, are the extended knuckles a bolt on affair?

[dil han]

Originally Posted by jbjslambert

Bump. I have seen this car close up and its nice!!

why you selling it?

Hey thanks, I'm a builder and want to build another car so this will be my funds.

Originally Posted by RNGWLD

Have an s13 just on coils and adjustable tension rods up front, are the extended knuckles a bolt on affair?

All you need are two big inner tie rod spacers like PBM, GKTECH or godspeed. Everything bolts on.

[blancochristian]

Dude sick vert.....

[dil han]

Originally Posted by blancochristian

Dude sick vert.....

Thanks man. Already sold some things! Come get this ish!

[kooky]

Is the ASD handbrake up for grabs?

[sr20time]

sick build easy easy bump for you

[dil han]

Originally Posted by sr20time

sick build easy easy bump for you

Thanks a lot. Coils and tails are sold.

[blancochristian]

I am also interested in that ASD ebrake setup. with lines?

[Bushido]

are the 350z mirrors a straight bolt-on affair? close up pics?

[TheRealSy90]

Damn that's heavy for a track car lol, my coupe is 2,400 ish and it's a street car.

[dil han]

Part list updated and prices dropped. Lets get this swap and shell sold.

[dil han]

Sold the Volks and Cosmis MRII wheels

[dil han]

Sold all the swap parts. Really looking to sell the shell and the motor/trans. I'll keep everything else.

[Bnr32gtr]

I see knuckles on the title but don't see them listed?

[lalo167]

Price on tail lights?

[dil han]

Bump shell and motor/Trans are still for sale.

[niSm095]

Do you still have the coolant tank? I'd be interested in that.

[signals13]

z32 to s13 brake conversion lines?

[JDAVE]

What's the word on the Stillen blower?

[Kuma-power.gt3037]

Are the seats just Sparco EVO's or are they EVO2, EVO2 US, EVO3 ? Sorry, i dont have a subtle enough eye.

[Busted_daily]

just sent a pm

[lewisfk]

More info on the engine, is back to.stock or is it coming with blower? What were you using for engine management and engine mounts driveshaft price?

[.jAY]

300zx brake set up shipped to 19401?