![]() |
|
Chat General Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Witch seat rails are lower?
I search cant find the andswer i have pair of recaro sr3 bottom mount seats and want to put it in my s14 witch sliding rails are the lowest? Is bride low max lower then bride type-mo? Or any orher rail thanx
|
|
![]() |
![]() |
Sponsored Links |
![]() |
#2 |
Nissanaholic!
![]() |
You need type MO most likely as you have a bottom mount seat
__________________
MRP Manufacturing |
![]() |
![]() |
![]() |
#5 |
Nissanaholic!
![]() Join Date: Aug 2011
Location: France - Toulouse
Age: 44
Posts: 1,851
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
You really need side mounts seats in an S chassis. you can barely get the OEM height when mounting side mounts the lowest possible, and any bottom mount will be higher than that.
Maybe not a problem to japanese people, but western ppl are not that small. The cheapest safe side mounts i found were the buddyclub ones (locks on each side, enough material thickness to hold the seat). Yet i needed snug fit sparco corsas (and a bit of hammer on the trans tunnel near the mount) to mount them low. |
![]() |
![]() |
![]() |
#10 |
Nissanaholic!
![]() |
Sparco bottom mount on Bride MO rail. Sits as low as my spec r seat. Higher in the front by a little due to seat design
![]()
__________________
MRP Manufacturing |
![]() |
![]() |
![]() |
#11 |
Post Whore!
![]() Join Date: Nov 2005
Location: Nowhere
Age: 34
Posts: 3,285
Trader Rating: (9)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 9 reviews
|
If you have a sidemount seat stay away from buddy club rails. Lowest setting is higher than stock seat. It sucks.
__________________
http://www.nissanroadracing.com/ |
![]() |
![]() |
![]() |
#14 |
Zilvia Addict
![]() Join Date: Feb 2008
Location: Laurel, MD
Age: 39
Posts: 815
Trader Rating: (29)
![]() Feedback Score: 29 reviews
|
Could have the bride rails customized. Cut the c-channel out from the driver's front floor, hammer, cut and weld in new L metal where it splits, cut and weld on the rails, can damn near have the seat on the floor. Miles of headroom after.
__________________
![]() |
![]() |
![]() |
![]() |
#17 |
Zilvia Member
![]() |
|
![]() |
![]() |
![]() |
#18 |
Zilvia FREAK!
![]() |
I'm running the planted rail in my car.
![]() ![]()
__________________
95 240sx RB20 415whp 91 Nx2000 VVL yo Last edited by Yellow4g63; 08-20-2017 at 08:41 PM.. |
![]() |
![]() |
![]() |
#19 | |
Nissanaholic!
![]() |
Quote:
__________________
MRP Manufacturing |
|
![]() |
![]() |
![]() |
#20 | |
Zilvia Addict
![]() Join Date: Feb 2008
Location: Laurel, MD
Age: 39
Posts: 815
Trader Rating: (29)
![]() Feedback Score: 29 reviews
|
Quote:
![]() ![]() ![]() ![]()
__________________
![]() |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|