CA complete ka24de swap and OEM s14 hubs - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

S13park · 07-08-2015, 10:07 AM

Hi everyone,

I have a complete s14 kouki ka24de for sale that i took out of my s13. Mileage is unknown but drove like a dream up until recently it started giving me problems. Car still ran when I removed the engine but had idle issues and power loss. Never bothered to diagnose the problem as shortly after removed the engine to go SR20.

Also for sale are some OEM s14 hubs as I recently bought new hubs to replace these.

I'm asking $300 OBO for the ka engine/trans setup and $100 OBO for the s14 hubs.

Call or text me at 909-573-5592 or PM me for any questions. Engine/trans is local pick up only but I am willing to ship the hubs at extra cost from buyer. Thanks.

Ralo · 07-08-2015, 10:08 AM

I want that engine and trans, where are you

S13park · 07-08-2015, 10:09 AM

Chino hills CA

Ralo · 07-08-2015, 10:13 AM

Opposite side of the coast, gl with sale either way.

*Initial Drift* · 07-08-2015, 10:59 AM

Any extra info on the engine/trans? Compression numbers? I assume this is harness-less. Trans grind at all?

S13park · 07-08-2015, 12:30 PM

I never compression tested the motor. I did a lot of repairs and maintenance on the motor such as water pump, knock and maf sensor, time chain guides and tensioners, rear and front main seal, recently replaced the clutch disk and resurfaced the flywheel. I do have the wiring harness that I used on my s13 and will include it with purchase. Transmission never grinded on me. let me know if u have any more questions.

HORShi · 07-08-2015, 01:52 PM

Is there anything wrong with the hubs?

S13park · 07-08-2015, 03:30 PM

Nothing is wrong. I just wanted to replace my hubs since i was removing my subframe for the bushings.

*Initial Drift* · 07-08-2015, 03:44 PM

A few more questions for you about the engine. Is this still smogable as an obd2 engine or did you mess with the emissions when you installed it on your s13? Is the transmission a s13 or s14 one?

07-08-2015, 01:52 PM	#7
HORShi Zilvia Member Join Date: Feb 2014 Location: Wicked City 邪悪な街 Posts: 294 Trader Rating: (1) Feedback Score: 1 reviews	Is there anything wrong with the hubs? __________________ *http://underworld-jp.com*

07-08-2015, 10:08 AM	#2
Ralo Leaky Injector Join Date: Jun 2013 Location: pennsylvania Posts: 50 Trader Rating: (0) Feedback Score: 0 reviews	I want that engine and trans, where are you

07-08-2015, 10:09 AM	#3
S13park Join Date: Oct 2014 Location: Riverside, CA Posts: 12 Trader Rating: (1) Feedback Score: 1 reviews	Chino hills CA

07-08-2015, 10:13 AM	#4
Ralo Leaky Injector Join Date: Jun 2013 Location: pennsylvania Posts: 50 Trader Rating: (0) Feedback Score: 0 reviews	Opposite side of the coast, gl with sale either way.

07-08-2015, 10:59 AM	#5
Initial Drift Premium Member Join Date: Jan 2012 Location: orange county Posts: 396 Trader Rating: (0) Feedback Score: 0 reviews	Any extra info on the engine/trans? Compression numbers? I assume this is harness-less. Trans grind at all?

07-08-2015, 12:30 PM	#6
S13park Join Date: Oct 2014 Location: Riverside, CA Posts: 12 Trader Rating: (1) Feedback Score: 1 reviews	I never compression tested the motor. I did a lot of repairs and maintenance on the motor such as water pump, knock and maf sensor, time chain guides and tensioners, rear and front main seal, recently replaced the clutch disk and resurfaced the flywheel. I do have the wiring harness that I used on my s13 and will include it with purchase. Transmission never grinded on me. let me know if u have any more questions.

07-08-2015, 03:30 PM	#8
S13park Join Date: Oct 2014 Location: Riverside, CA Posts: 12 Trader Rating: (1) Feedback Score: 1 reviews	Nothing is wrong. I just wanted to replace my hubs since i was removing my subframe for the bushings.

07-08-2015, 03:44 PM	#9
Initial Drift Premium Member Join Date: Jan 2012 Location: orange county Posts: 396 Trader Rating: (0) Feedback Score: 0 reviews	A few more questions for you about the engine. Is this still smogable as an obd2 engine or did you mess with the emissions when you installed it on your s13? Is the transmission a s13 or s14 one?