Sr20det Swap- KA or SR throttle bracket? + Identify feint metallic sound - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

2slow2go · 04-25-2016, 11:28 AM

Do i use the KA or SR20 throttle bracket on the sr20det swap into an s13? I read that both need modification?

Currently i dont have either. Is there a part number for these parts?

Please help!

In addition, I just got my sr20det started. I hear like a metalic intermittent feint sound coming from the rear/lower part of the engine. Sounds like a very feint low fluid power steering sound. Any ideas? ( new waterpump, full fluid in power steering, and still persists. The sound doesn't get louder when i rev the car or anything). Also i changed the clutch with a brand new exedy one with throwout bearing. I believe it not that.

Thanks

Blk96t · 04-25-2016, 12:15 PM

Just make a throttle bracket?
It's just a L with a slot cut for the cable and a hole to bolt to the manifold.

As far as the sound goes. Try pushing in the clutch and see if the sound goes awÃ*y. Nisssans seem th have loud throw out bearings.
Other wise it's really hard to tell from a description..

dave123thomas · 04-25-2016, 12:28 PM

Throw out bearing on the right wAy?

91rps13 · 04-25-2016, 01:13 PM

i used the sr bracket. Never had to modify anything, but yeah like someone mentioned already, you can just make one. Btw it was a Sohc to s14 sr20 swap.

2slow2go · 04-25-2016, 02:03 PM

I changed the clutch with my swap and put on the new bearing that it came with ( exedy stage 2).

I made a custom bracket right now but it doesnt align 100% with the throttle slot. I dont want the cable to wear down over time or have friction against the metal for later if there is a perfect oem option.

SidewayzAsFck · 08-02-2016, 03:21 PM

I got a nice xcessive SR20det THrottle cable bracket for sale. Fits nicely BNIB $20 (shipped) http://xcessivemanufacturing.com/ind...sr-tcb-s1.html

kruked · 08-02-2016, 09:20 PM

Quote:

Originally Posted by SidewayzAsFck

I got a nice xcessive SR20det THrottle cable bracket for sale. Fits nicely BNIB $20 (shipped) http://xcessivemanufacturing.com/ind...sr-tcb-s1.html

Why are you trying to sell something in the tech section, 3 months after the last post?

04-25-2016, 11:28 AM	#1
2slow2go Zilvia Addict Join Date: Sep 2006 Location: Bothell Age: 79 Posts: 622 Trader Rating: (7) Feedback Score: 7 reviews	Sr20det Swap- KA or SR throttle bracket? + Identify feint metallic sound Do i use the KA or SR20 throttle bracket on the sr20det swap into an s13? I read that both need modification? Currently i dont have either. Is there a part number for these parts? Please help! In addition, I just got my sr20det started. I hear like a metalic intermittent feint sound coming from the rear/lower part of the engine. Sounds like a very feint low fluid power steering sound. Any ideas? ( new waterpump, full fluid in power steering, and still persists. The sound doesn't get louder when i rev the car or anything). Also i changed the clutch with a brand new exedy one with throwout bearing. I believe it not that. Thanks Last edited by 2slow2go; 04-25-2016 at 02:04 PM..

04-25-2016, 01:13 PM	#4
91rps13 Zilvia Member Join Date: Sep 2006 Location: El Paso, TX Age: 38 Posts: 202 Trader Rating: (4) Feedback Score: 4 reviews	i used the sr bracket. Never had to modify anything, but yeah like someone mentioned already, you can just make one. Btw it was a Sohc to s14 sr20 swap. __________________ No more 240

04-25-2016, 12:15 PM	#2
Blk96t Leaky Injector Join Date: Mar 2013 Location: Sioux falls Age: 45 Posts: 52 Trader Rating: (0) Feedback Score: 0 reviews	Just make a throttle bracket? It's just a L with a slot cut for the cable and a hole to bolt to the manifold. As far as the sound goes. Try pushing in the clutch and see if the sound goes awÃ*y. Nisssans seem th have loud throw out bearings. Other wise it's really hard to tell from a description..

04-25-2016, 12:28 PM	#3
dave123thomas Zilvia Junkie Join Date: Jun 2014 Posts: 351 Trader Rating: (2) Feedback Score: 2 reviews	Throw out bearing on the right wAy?

04-25-2016, 02:03 PM	#5
2slow2go Zilvia Addict Join Date: Sep 2006 Location: Bothell Age: 79 Posts: 622 Trader Rating: (7) Feedback Score: 7 reviews	I changed the clutch with my swap and put on the new bearing that it came with ( exedy stage 2). I made a custom bracket right now but it doesnt align 100% with the throttle slot. I dont want the cable to wear down over time or have friction against the metal for later if there is a perfect oem option.

08-02-2016, 03:21 PM	#6
SidewayzAsFck Zilvia Junkie Join Date: May 2012 Location: Jersey Posts: 479 Trader Rating: (16) Feedback Score: 16 reviews	I got a nice xcessive SR20det THrottle cable bracket for sale. Fits nicely BNIB $20 (shipped) http://xcessivemanufacturing.com/ind...sr-tcb-s1.html