TX S14 lsx part out (SIKKY, APEXI, Hp TUNNER, Wiring Specialties) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Mr.s14.5 · 08-20-2016, 03:05 PM

Sikky headers with custom y pipe that connects to a real apexi dual n1,
The headers are v band and from the y pipes thats are custom tig welded to the exhaust the entire piece is one part no flanges and resonator removed. asking $1000 for everything headers alone are woth that.

Sikky motor mount kit:
Basic Mount Kit Includes:

Aluminum Race Oil Pan

7 Quart High Capacity Design
6061 CNC Machined Flanges from 1/2″ Aluminum Retaining OEM like Structural Rigidity (not flimsy like other aftermarket pans)
Rear Flange at Bell Housing Allows Install of Factory Dust Shields
Baffle and Trap Doors to Prevent Oil Starvation
New OEM Oil Pan Gasket
Custom Oil Pickup Assembly

Remote mount filter Kit

-10 AN Fittings (4) and Stainless Braided Lines (2)
Remote Oil Filter Base
High Quality Oil Filter
All Fittings and Hardware

Engine Mounts & Transmission Mounts

CAD/CAM Designed CNC Machined Solid 6061 T-6 Aluminum Mounts
Custom Urethane Bushings with True Isolation
High Grade Hardware Kit
Proper Engine Placement and Axle Alignment
Lifetime Warranty on Engine Mounts

Trans Mount

CAD/CAM Designed
CNC Bent Steel Mount Bracket
Urethane Bushing
High Grade Hardware Kit
Designed for use with the T56 or T56 Magnum
Lifetime Warranty on Transmission Mount

Driveshaft

aluminum One Piece Driveshaft with High Strength 1310 U-joints
Designed for Use with the T56 or 4l60e Transmission

retail is $1750 not including shipping and not including the aluminum driveshaft asking $1350 I will throw the 240sx LSx Master Cylinder Conversion Kit for $150 kit is used but in very good conditions.

New unused wiring specialty harness for a 95 240sx pro series with converter box and all extra connectors and $600 new

wiring specialty coil pack harness- SOLD

oem gm corvette fuel filter and an adapters and 20 ft of tpf lines -$150 new

Sikky front sway bar new in the box -$275

Ls ecu with Hp tunners and all shit removed - $250

thats all for now

Mr.s14.5 · 08-21-2016, 10:25 AM

Bump bump bump

Mr.s14.5 · 08-21-2016, 08:41 PM

Bump bump bump

EnergeticPhenom · 08-21-2016, 08:54 PM

Pics of any of it?

Mr.s14.5 · 08-21-2016, 09:12 PM

What exactly are you interested in most parts are very self explanatory.

Mr.s14.5 · 08-22-2016, 07:43 AM

Bump bump bump

Mr.s14.5 · 08-22-2016, 04:17 PM

back to the top

dudermagee · 08-22-2016, 05:39 PM

Which headers? As in what size runners

Mr.s14.5 · 08-23-2016, 10:32 AM

Quote:

Originally Posted by dudermagee

Which headers? As in what size runners

1 7/8 they are non ceramic coated

1Badhatch · 08-22-2016, 06:03 PM

I'll take just the hp tuners how many credits u got left??

Mr.s14.5 · 08-23-2016, 10:35 AM

Quote:

Originally Posted by 1Badhatch

I'll take just the hp tuners how many credits u got left??

Sorry my pcm was flashed and tunned with hp tuners and got it ready to run a ls series motor

Marco,s14.. · 08-23-2016, 02:18 PM

I'm interested in some parts, let me know if your willing to sell individual.

Mr.s14.5 · 08-23-2016, 04:59 PM

Quote:

Originally Posted by Marco,s14..

I'm interested in some parts, let me know if your willing to sell individual.

let me know what youre interested in?

Marco,s14.. · 08-23-2016, 05:12 PM

I'm interested in oil pan and clutch master cylinder, and what's the brand on them. Thanx

Mr.s14.5 · 08-23-2016, 07:48 PM

It's a sikky I'll let you know if I part it out

Mr.s14.5 · 08-25-2016, 10:45 AM

bump back to the top

Mr.s14.5 · 08-28-2016, 10:48 PM

Bump bump bump

milesbizzell · 08-29-2016, 11:18 AM

I live in san Antonio, can you send me some pics? very interested. milesbizzell at yaho

dudermagee · 08-29-2016, 11:33 AM

Willing to sell just the headers?

If so how much shipped to 06082?

Mr.s14.5 · 08-29-2016, 11:11 PM

Quote:

Originally Posted by dudermagee

Willing to sell just the headers?

If so how much shipped to 06082?

Not parting out sorry

Rjds13 · 11-11-2016, 02:13 PM

Are you willing to sell the motor mounts separately

octanejockey · 11-11-2016, 02:18 PM

Please PM me your best price shipped to 34695 for everything except the wiring harness

Mr.s14.5 · 01-10-2017, 02:09 PM

bump still have most of these parts

1Badhatch · 01-10-2017, 06:30 PM

Your selling your headers together with the exhaust but dosent the sikky kit come with the headers not trying to start shit just asking potential buyer with tax season a few weeks away and all

Mr.s14.5 · 01-18-2017, 02:37 PM

Quote:

Originally Posted by 1Badhatch

Your selling your headers together with the exhaust but dosent the sikky kit come with the headers not trying to start shit just asking potential buyer with tax season a few weeks away and all

the kit doesnt come with the headers you can add them but its a totally different price. the headers were modified to fit a custom center section and its a one piece exhaust system so it all has to go together.

NaughtyDawg63 · 04-06-2017, 08:48 PM

Pmd. Very interested. Cash in hand!

Mr.s14.5 · 04-06-2017, 10:52 PM

Everything is sold

08-20-2016, 03:05 PM	#1
Mr.s14.5 Zilvia Member Join Date: Mar 2014 Location: houston Age: 44 Posts: 282 Trader Rating: (5) Feedback Score: 5 reviews	S14 lsx part out (SIKKY, APEXI, Hp TUNNER, Wiring Specialties) Sikky headers with custom y pipe that connects to a real apexi dual n1, The headers are v band and from the y pipes thats are custom tig welded to the exhaust the entire piece is one part no flanges and resonator removed. asking $1000 for everything headers alone are woth that. Sikky motor mount kit: Basic Mount Kit Includes: Aluminum Race Oil Pan 7 Quart High Capacity Design 6061 CNC Machined Flanges from 1/2″ Aluminum Retaining OEM like Structural Rigidity (not flimsy like other aftermarket pans) Rear Flange at Bell Housing Allows Install of Factory Dust Shields Baffle and Trap Doors to Prevent Oil Starvation New OEM Oil Pan Gasket Custom Oil Pickup Assembly Remote mount filter Kit -10 AN Fittings (4) and Stainless Braided Lines (2) Remote Oil Filter Base High Quality Oil Filter All Fittings and Hardware Engine Mounts & Transmission Mounts CAD/CAM Designed CNC Machined Solid 6061 T-6 Aluminum Mounts Custom Urethane Bushings with True Isolation High Grade Hardware Kit Proper Engine Placement and Axle Alignment Lifetime Warranty on Engine Mounts Trans Mount CAD/CAM Designed CNC Bent Steel Mount Bracket Urethane Bushing High Grade Hardware Kit Designed for use with the T56 or T56 Magnum Lifetime Warranty on Transmission Mount Driveshaft aluminum One Piece Driveshaft with High Strength 1310 U-joints Designed for Use with the T56 or 4l60e Transmission retail is $1750 not including shipping and not including the aluminum driveshaft asking $1350 I will throw the 240sx LSx Master Cylinder Conversion Kit for $150 kit is used but in very good conditions. New unused wiring specialty harness for a 95 240sx pro series with converter box and all extra connectors and $600 new wiring specialty coil pack harness- SOLD oem gm corvette fuel filter and an adapters and 20 ft of tpf lines -$150 new Sikky front sway bar new in the box -$275 Ls ecu with Hp tunners and all shit removed - $250 thats all for now

08-21-2016, 10:25 AM	#2
Mr.s14.5 Zilvia Member Join Date: Mar 2014 Location: houston Age: 44 Posts: 282 Trader Rating: (5) Feedback Score: 5 reviews	Bump bump bump

08-21-2016, 08:41 PM	#3
Mr.s14.5 Zilvia Member Join Date: Mar 2014 Location: houston Age: 44 Posts: 282 Trader Rating: (5) Feedback Score: 5 reviews	Bump bump bump

08-21-2016, 08:54 PM	#4
EnergeticPhenom Zilvia Member Join Date: Nov 2014 Location: Austin, TX Age: 39 Posts: 208 Trader Rating: (3) Feedback Score: 3 reviews	Pics of any of it?

08-21-2016, 09:12 PM	#5
Mr.s14.5 Zilvia Member Join Date: Mar 2014 Location: houston Age: 44 Posts: 282 Trader Rating: (5) Feedback Score: 5 reviews	What exactly are you interested in most parts are very self explanatory.

08-22-2016, 07:43 AM	#6
Mr.s14.5 Zilvia Member Join Date: Mar 2014 Location: houston Age: 44 Posts: 282 Trader Rating: (5) Feedback Score: 5 reviews	Bump bump bump

08-22-2016, 04:17 PM	#7
Mr.s14.5 Zilvia Member Join Date: Mar 2014 Location: houston Age: 44 Posts: 282 Trader Rating: (5) Feedback Score: 5 reviews	back to the top

08-22-2016, 06:03 PM	#10
1Badhatch Zilvia Junkie Join Date: Oct 2013 Location: Moreno valley California Age: 34 Posts: 392 Trader Rating: (2) Feedback Score: 2 reviews	I'll take just the hp tuners how many credits u got left??

08-23-2016, 02:18 PM	#12
Marco,s14.. Join Date: Aug 2014 Location: socal Age: 37 Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	I'm interested in some parts, let me know if your willing to sell individual.

08-23-2016, 05:12 PM	#14
Marco,s14.. Join Date: Aug 2014 Location: socal Age: 37 Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	I'm interested in oil pan and clutch master cylinder, and what's the brand on them. Thanx

08-23-2016, 07:48 PM	#15
Mr.s14.5 Zilvia Member Join Date: Mar 2014 Location: houston Age: 44 Posts: 282 Trader Rating: (5) Feedback Score: 5 reviews	It's a sikky I'll let you know if I part it out

08-25-2016, 10:45 AM	#16
Mr.s14.5 Zilvia Member Join Date: Mar 2014 Location: houston Age: 44 Posts: 282 Trader Rating: (5) Feedback Score: 5 reviews	bump back to the top

08-28-2016, 10:48 PM	#17
Mr.s14.5 Zilvia Member Join Date: Mar 2014 Location: houston Age: 44 Posts: 282 Trader Rating: (5) Feedback Score: 5 reviews	Bump bump bump

08-29-2016, 11:18 AM	#18
milesbizzell Leaky Injector Join Date: Mar 2007 Location: Teaxs Age: 54 Posts: 68 Trader Rating: (0) Feedback Score: 0 reviews	I live in san Antonio, can you send me some pics? very interested. milesbizzell at yaho

11-11-2016, 02:13 PM	#21
Rjds13 Join Date: Apr 2016 Location: NY Age: 37 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	Are you willing to sell the motor mounts separately

11-11-2016, 02:18 PM	#22
octanejockey Leaky Injector Join Date: Jul 2015 Location: Safety Harbor, FL Posts: 117 Trader Rating: (5) Feedback Score: 5 reviews	Please PM me your best price shipped to 34695 for everything except the wiring harness

01-10-2017, 02:09 PM	#23
Mr.s14.5 Zilvia Member Join Date: Mar 2014 Location: houston Age: 44 Posts: 282 Trader Rating: (5) Feedback Score: 5 reviews	bump still have most of these parts

01-10-2017, 06:30 PM	#24
1Badhatch Zilvia Junkie Join Date: Oct 2013 Location: Moreno valley California Age: 34 Posts: 392 Trader Rating: (2) Feedback Score: 2 reviews	Your selling your headers together with the exhaust but dosent the sikky kit come with the headers not trying to start shit just asking potential buyer with tax season a few weeks away and all

04-06-2017, 08:48 PM	#26
NaughtyDawg63 Join Date: Jun 2011 Location: Atlanta Age: 34 Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	Pmd. Very interested. Cash in hand!

04-06-2017, 10:52 PM	#27
Mr.s14.5 Zilvia Member Join Date: Mar 2014 Location: houston Age: 44 Posts: 282 Trader Rating: (5) Feedback Score: 5 reviews	Everything is sold