NM Testing waters 1995 240sx - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

89fastback · 11-08-2016, 07:36 PM

Testing waters on my 1995 240sx, car was originally being built for pro am but im loosing intrest. Car has a clean title and hasnt been in amy major accidents. Im looking for something more streetable prefer an ap1s2000, something rhd ect but am open to manual transmission rwd cars.

Mods as follows
Gm 5.3 v8 (was told 25k on engine)
Daft motor and trans mounts
T-56
Spec 6 puck
Canton pan
Sikky oil filter relocation
Gto pick up tube
P/s cooler
New steel braided ps line
Arp pressure plate bolts
Arp flywheel bolts
Oem flywheel
Hooker headers
Sikky remote bleeder
Wilwood clutch master with steel braided line
Corvette factory air box
Gm performance wiring harness
1 piece cx racing driveshaft
B and m short shifter
(Will come with stock shifter as well)

Suspension
Pbm coilovers (less than 5k miles)
Pbm front knuckles (version 1)
Pbm front lca (version 1)
Pbm eccentric rack bushings
Pbm tie rods
Isis tension rods
Pbm rear lca
Pbm traction rods
Pbm toe rods
Pbm rear upper control arms
Solid subframe bushings

Wilwood front brakes
Hydro e brake

Wheels include
4 mustang bullit reps 18x9.5 +0
6 mustang gt500 17x10.5 +28
2 cobra 17x9
2 cobra 17x10

Interior
Nardi wood grain wheel
Nrg quick release
Nrg hub
Sparco driver seat
Stock passenger seat
New to date fia approved harnesses
1.5x0.95 dom nubs fab roll cage

Outside
New p2m clear headlight lenses
New clear front corner lights
New tinted dmax style taillights
Carbon trunk( not in amazing shape)
Rear aero bumper( not in good shape
Side skirts (one broken but can be repaired.

Car is currently being prepped for paint all big dents were pulled properly with assistance from a bodyman. Only body work left is dent on passenger side rear quarter from rolling fenders.

Car will need a few ting before its 100%
Still needs gauges, paint, hood, aero and a good bath.

Once again testing the waters not in any hurry to sell. Call or text 505-712-5975

Some pics older can provide more upon request.

89fastback · 11-26-2016, 08:08 PM

Bump few more pictures

11-08-2016, 07:36 PM	#1
89fastback Zilvia Junkie Join Date: May 2007 Location: Arizona Posts: 315 Trader Rating: (0) Feedback Score: 0 reviews	Testing waters 1995 240sx Testing waters on my 1995 240sx, car was originally being built for pro am but im loosing intrest. Car has a clean title and hasnt been in amy major accidents. Im looking for something more streetable prefer an ap1s2000, something rhd ect but am open to manual transmission rwd cars. Mods as follows Gm 5.3 v8 (was told 25k on engine) Daft motor and trans mounts T-56 Spec 6 puck Canton pan Sikky oil filter relocation Gto pick up tube P/s cooler New steel braided ps line Arp pressure plate bolts Arp flywheel bolts Oem flywheel Hooker headers Sikky remote bleeder Wilwood clutch master with steel braided line Corvette factory air box Gm performance wiring harness 1 piece cx racing driveshaft B and m short shifter (Will come with stock shifter as well) Suspension Pbm coilovers (less than 5k miles) Pbm front knuckles (version 1) Pbm front lca (version 1) Pbm eccentric rack bushings Pbm tie rods Isis tension rods Pbm rear lca Pbm traction rods Pbm toe rods Pbm rear upper control arms Solid subframe bushings Wilwood front brakes Hydro e brake Wheels include 4 mustang bullit reps 18x9.5 +0 6 mustang gt500 17x10.5 +28 2 cobra 17x9 2 cobra 17x10 Interior Nardi wood grain wheel Nrg quick release Nrg hub Sparco driver seat Stock passenger seat New to date fia approved harnesses 1.5x0.95 dom nubs fab roll cage Outside New p2m clear headlight lenses New clear front corner lights New tinted dmax style taillights Carbon trunk( not in amazing shape) Rear aero bumper( not in good shape Side skirts (one broken but can be repaired. Car is currently being prepped for paint all big dents were pulled properly with assistance from a bodyman. Only body work left is dent on passenger side rear quarter from rolling fenders. Car will need a few ting before its 100% Still needs gauges, paint, hood, aero and a good bath. Once again testing the waters not in any hurry to sell. Call or text 505-712-5975 Some pics older can provide more upon request.

11-26-2016, 08:08 PM	#2
89fastback Zilvia Junkie Join Date: May 2007 Location: Arizona Posts: 315 Trader Rating: (0) Feedback Score: 0 reviews	Bump few more pictures