Parts needed to complete 5 speed swap - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

hyde097 · 12-31-2017, 08:59 PM

5 speed swapping my S14. Got a trans, shifter, and master/slave/hard line assembly. What do I need to complete the swap? Never done anything like this and I barely know how to drive a manual so know very little about what’s needed to complete the conversion. All I know is that I don’t have a clutch fork or clutch assembly/pedal. Any info is helpful.

Thanks.

240sxScores · 01-09-2018, 03:29 PM

You'll need a manual trans cross member. Might need a 5 spd driveshaft too. There should be a swap guide somewhere on the internet for this.

*brndck* · 01-09-2018, 03:48 PM

wow, is today national "I can't use google on my own" day?
http://lmgtfy.com/?q=240sx+5+speed+swap

JustinChillenBallin · 01-09-2018, 03:54 PM

Quote:

Originally Posted by brndck

wow, is today national "I can't use google on my own" day?
http://lmgtfy.com/?q=240sx+5+speed+swap

he's from Kentucky, cut him some slack!

drifter5 · 01-09-2018, 09:14 PM

Just did mine last year on a '95 S14.

Looks like you're still missing...
-Driveshaft
-Pressure Plate Bolts
-Clutch + Pressure Plate
-Flywheel
-Flywheel bolts
-Dust Cover
-Bell housing bolts
-5 Speed brake pedal (or you can cut your existing one)

Also make sure you get an S14 transmission otherwise if you use an S13, you will have to drill a hole for the CAS and figure out the wiring required for the speed sensor.

I also swapped ECU on mine to a 95 5-speed to get rid of the CEL.

01-09-2018, 03:29 PM	#2
240sxScores Zilvia Junkie Join Date: May 2005 Location: Pocono's PA Age: 38 Posts: 304 Trader Rating: (2) Feedback Score: 2 reviews	You'll need a manual trans cross member. Might need a 5 spd driveshaft too. There should be a swap guide somewhere on the internet for this.

01-09-2018, 09:14 PM	#5
drifter5 Join Date: May 2005 Location: Dallas Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	Just did mine last year on a '95 S14. Looks like you're still missing... -Driveshaft -Pressure Plate Bolts -Clutch + Pressure Plate -Flywheel -Flywheel bolts -Dust Cover -Bell housing bolts -5 Speed brake pedal (or you can cut your existing one) Also make sure you get an S14 transmission otherwise if you use an S13, you will have to drill a hole for the CAS and figure out the wiring required for the speed sensor. I also swapped ECU on mine to a 95 5-speed to get rid of the CEL.