Aftermarket exhaust, use stock gaskets??? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Got Sileighty? · 10-30-2004, 04:22 PM

hey guys, i just picked up a used catback (5zigen Border III 60mm). my question is, will the gaskets and bolts for a stock exhaust system fit??

also, someone suggested that i just buy a big piece of gasket material, and cut out the shape of the exhaust flange. is that even a good idea? and arent exhaust gakets metal?

btw, its for an s13 dohc, if it makes a difference. thanks.

***S14DB*** · 10-30-2004, 05:30 PM

It should have come with gaskets. but the best ones I have found are Project Silvia ones for the price. http://www.projectnissan.com/Product...&idproduct=637

Got Sileighty? · 11-01-2004, 01:31 AM

like i said, i bought it used, so no gaskets...cmon guys, i just need to know if the stock ones will fit or not. cuz if they fit, then i could just go to a nissan dealership and buy em there.

dct223 · 11-01-2004, 01:44 AM

U should be fine.. even if u dont have a gasket, ur car will still run fine since its exhuast

Dream240 · 11-02-2004, 07:46 AM

Quote:

Originally Posted by dct223

U should be fine.. even if u dont have a gasket, ur car will still run fine since its exhuast

Are you saying to run without the gaskets? That's really not a good idea. Unless you like a car that sounds like a lawn mower. You will have exhaust leaks all over the place. Trust me not the way to go....REALLY ghetto.

Eternal_240Sx · 11-02-2004, 10:15 AM

Just go to a kragen, napa, or autozone and get a stock gasket for like 3 bucks. What i did for mine is i simply cut the gasket to make it 3 inch.

dct223 · 11-03-2004, 09:30 AM

Quote:

Originally Posted by Dream240

Are you saying to run without the gaskets? That's really not a good idea. Unless you like a car that sounds like a lawn mower. You will have exhaust leaks all over the place. Trust me not the way to go....REALLY ghetto.

NO i said, if they dont fit, he can run it without gaskets first, then get new ones. I wanted to SAY that since its exhaust, if he doesnt have a gasket for the time being (the stock ones dont fit, or are too worn), his car will still run alright IE., not sputtering no rough idle.

Dream240 · 11-03-2004, 09:57 AM

Quote:

Originally Posted by dct223

U should be fine.. even if u dont have a gasket, ur car will still run fine since its exhuast

Not to be nit-picky but this post hardly explains what you said in your second post. I'm just going by what you said to begin with. Elaborating on it with your second post is what you should have done in the first place...

And if you WANTED to say it, then why didn't you just say it? Seems to be the best idea to always fully explain yourself since you have no idea WHO'S reading the posts and what their comprehensive level of understanding is. Just a suggestion. Not trying to start a flame war, just stating an observation.

dct223 · 11-03-2004, 10:06 AM

Quote:

Originally Posted by Dream240

Not to be nit-picky but this post hardly explains what you said in your second post. I'm just going by what you said to begin with. Elaborating on it with your second post is what you should have done in the first place...

And if you WANTED to say it, then why didn't you just say it? Seems to be the best idea to always fully explain yourself since you have no idea WHO'S reading the posts and what their comprehensive level of understanding is. Just a suggestion. Not trying to start a flame war, just stating an observation.

okay My BAD, Ill make sure Ill double check and fully think out what i write on all my posts from now on...

Im sorry for my lack of time and effort on posts due to stressful weeks of school, i will step it up

Dream240 · 11-03-2004, 10:28 AM

Damn man, why can't all members be like you....

Wei240 · 11-01-2004, 01:50 AM

i bought an apex n1, used stock gaskets from nissan dealer, alot of aftermarket ones are paperish... stock nissan ones are only 5-10 bucks from the dealer, and speaking of which i have an extra set somewhere....

TheSnail · 11-01-2004, 01:56 AM

It will fit, but there is one problem. The center hole of your stock exhaust is 2" diameter, for a 3in exh, you would have a .5" wall all around, which would not do anything but create turbulence. Though 60mm is = to 2.36", it wont mater. If you plan on Na all the way, then it should be good enough, but if you are going turbo, you have failed

Dream240 · 11-03-2004, 08:10 AM

Quote:

Originally Posted by TheSnail

It will fit, but there is one problem. The center hole of your stock exhaust is 2" diameter, for a 3in exh, you would have a .5" wall all around, which would not do anything but create turbulence. Though 60mm is = to 2.36", it wont mater. If you plan on Na all the way, then it should be good enough, but if you are going turbo, you have failed

The snail hit it. This is why you can't use the Nissan ones. Just go to a muffler shop, guarantee they have gaskets for you. I would rather get some that aren't modified and pay a little more then spend time trying to cut one bigger to fit and end up screwing it up.

Wei240 · 11-03-2004, 01:19 PM

Quote:

Originally Posted by Dream240

The snail hit it. This is why you can't use the Nissan ones. Just go to a muffler shop, guarantee they have gaskets for you. I would rather get some that aren't modified and pay a little more then spend time trying to cut one bigger to fit and end up screwing it up.

it won't matter if he has stock header and stock cat, it's still around 2.5 all around, so stock gaskets still would work fine even if his exhaust is larger than stock...

allmotorKA · 11-03-2004, 01:29 PM

Quote:

Originally Posted by Dream240

The snail hit it. This is why you can't use the Nissan ones. Just go to a muffler shop, guarantee they have gaskets for you. I would rather get some that aren't modified and pay a little more then spend time trying to cut one bigger to fit and end up screwing it up.

All of the metal Nissan gaskets I got from the local stealership were 2-1/2"...but this was a few years back. Did they change to 2"?

Dream240 · 11-03-2004, 01:40 PM

Hell I don't know. I replaced my entire exhaust setup and my High flow cat has flare flanges so I don't need gaskets. Once I pulled all that stuff off I've never looked back. sorry I can't help more.

Wait...(light bulb just flickered)....The connection from the header to CAT isn't being touched right? Just the connection from the "FAKE" cat to the cat-back pipe. That would mean a stock gasket WOULD work. duh...I just realized that....Of course a stock gasket would work, since the fake cat opening is not changing, the larger diameter piping starts at the exhaust so everything before it doesn't matter. So yeah, use the stock ones!!!

OMG I can't believe I didn't realize this before....damn all that coffee i drink...got me SO WIRED!!!

Dream240 · 11-03-2004, 01:44 PM

wait...(bulb flickered again)....this would only apply to the one the mounts the new exhaust to the stock fake cat. The gasket for the two exhaust pipes mounting together will need to be cut out appropriately or get the right size from a muffler shop. sorry guys...

As far as the material, the Nissan ones are metal based gaskets, they looked like metal and everything but they're flexible like paper, good stuff. Most muffler shops should have this quality gasket in stock to fit what you need.

Wei240 · 11-01-2004, 02:09 AM

oh yeah,
didn't post up, but i have s13 dohc, just like he original poster,
so stock gasket is fine...

going turbo one day,
just don't know when...

andrave · 11-01-2004, 01:41 PM

go to autozone and they can match them up, thats what I did. I got 2.5 gaskets that fit mine, they were OEM on a jeep cherokee or some shit.

Got Sileighty? · 11-02-2004, 01:08 AM

wei, u still have those gaskets? i need 2 of them ...i guess im gonna go with the stock gaskets, problem is they cost $12 at the dealer!!!! then i went to like 2 autozones, a pepboys, and a kragen, and none of them seem to have any in stock...maybe ill try what andrave suggested. thanks!...but wei, if u have 2 of them, let me know.

Got Sileighty? · 11-04-2004, 10:37 PM

Quote:

Originally Posted by andrave

go to autozone and they can match them up, thats what I did. I got 2.5 gaskets that fit mine, they were OEM on a jeep cherokee or some shit.

ok i think im gonna go with this suggestion tomorrow. one last question: are the autozone gaskets made of metal or paperish material?? yea im being nit-picky huh? o well.

Wei240 · 11-02-2004, 01:26 AM

yeah i do, two as in 2 pieces, it's sold as a set, as in 1 set = 2 pieces, (i'm pretty sure, it's actually in my glove compartment i think, i'll go look later),

i guess pm me for more info...

*crioten* · 11-02-2004, 11:15 AM

or you could make your own!!!

it sucks to make your own...turns out like a retard making paper snowflakes...

andrave · 11-02-2004, 12:19 PM

yeah buy smaller ones and use a dremel or something.

Wei240 · 11-02-2004, 01:57 PM

damn, just pay a little to get nissan ones.. it only costs a couple of tacos more...

andrave · 11-02-2004, 10:38 PM

newsflash: nissan ones don't fit

Wei240 · 11-03-2004, 01:27 AM

Quote:

Originally Posted by andrave

newsflash: nissan ones don't fit

don't fit what?

i thought we're talking about the gasket that goes in between the exhaust and cat? unless i'm skimming hte thread too damn quick to read details...

andrave · 11-03-2004, 01:56 PM

no one listens to me. go to a fucking parts store and have at it, they have ones that will work.

***S14DB*** · 11-03-2004, 02:57 PM

Quote:

Originally Posted by andrave

no one listens to me. go to a fucking parts store and have at it, they have ones that will work.

You mean there is a store down the street were I can get parts and I don't have to order off the net? I don't belive it....

axiomatik · 11-03-2004, 04:40 PM

Just go to a parts store, you can find gaskets in a range of sizes, 2", 2.5", 3", in lead, copper, paper. You don't need to go to the dealer or move it from some other spot. Find out what size you need, 2 or 3 bolt holes, and go to autozone or whatever.

10-30-2004, 04:22 PM	#1
Got Sileighty? Zilvia Addict Join Date: Dec 2002 Location: SoCaL Age: 46 Posts: 761 Trader Rating: (0) Feedback Score: 0 reviews	Aftermarket exhaust, use stock gaskets??? hey guys, i just picked up a used catback (5zigen Border III 60mm). my question is, will the gaskets and bolts for a stock exhaust system fit?? also, someone suggested that i just buy a big piece of gasket material, and cut out the shape of the exhaust flange. is that even a good idea? and arent exhaust gakets metal? btw, its for an s13 dohc, if it makes a difference. thanks.

10-30-2004, 05:30 PM	#2
*S14DB* AFC #1 Join Date: Oct 2003 Location: 昨晩あなたのお母さんの家 Posts: 20,181 Trader Rating: (3) Feedback Score: 3 reviews	It should have come with gaskets. but the best ones I have found are Project Silvia ones for the price. http://www.projectnissan.com/Product...&idproduct=637 __________________ Comments should be taken as Opinions not as Statements of Fact

11-01-2004, 01:44 AM	#4
dct223 Nissanaholic! Join Date: Nov 2003 Location: hella NORCAL! Age: 39 Posts: 1,664 Trader Rating: (4) Feedback Score: 4 reviews	U should be fine.. even if u dont have a gasket, ur car will still run fine since its exhuast __________________ Sfourteen

11-03-2004, 10:28 AM	#10
Dream240 Nissanaholic! Join Date: Dec 2002 Location: Inland Empire, California Age: 46 Posts: 2,188 Trader Rating: (8) Feedback Score: 8 reviews	Damn man, why can't all members be like you.... __________________ Don't mess with my monkey...he's loaded.

11-03-2004, 01:40 PM	#16
Dream240 Nissanaholic! Join Date: Dec 2002 Location: Inland Empire, California Age: 46 Posts: 2,188 Trader Rating: (8) Feedback Score: 8 reviews	Hell I don't know. I replaced my entire exhaust setup and my High flow cat has flare flanges so I don't need gaskets. Once I pulled all that stuff off I've never looked back. sorry I can't help more. Wait...(light bulb just flickered)....The connection from the header to CAT isn't being touched right? Just the connection from the "FAKE" cat to the cat-back pipe. That would mean a stock gasket WOULD work. duh...I just realized that....Of course a stock gasket would work, since the fake cat opening is not changing, the larger diameter piping starts at the exhaust so everything before it doesn't matter. So yeah, use the stock ones!!! OMG I can't believe I didn't realize this before....damn all that coffee i drink...got me SO WIRED!!! __________________ Don't mess with my monkey...he's loaded.

11-01-2004, 01:31 AM	#3
Got Sileighty? Zilvia Addict Join Date: Dec 2002 Location: SoCaL Age: 46 Posts: 761 Trader Rating: (0) Feedback Score: 0 reviews	like i said, i bought it used, so no gaskets...cmon guys, i just need to know if the stock ones will fit or not. cuz if they fit, then i could just go to a nissan dealership and buy em there.

11-02-2004, 10:15 AM	#6
Eternal_240Sx Zilvia Addict Join Date: Dec 2002 Location: norcal, bay area Age: 41 Posts: 674 Trader Rating: (1) Feedback Score: 1 reviews	Just go to a kragen, napa, or autozone and get a stock gasket for like 3 bucks. What i did for mine is i simply cut the gasket to make it 3 inch.

11-01-2004, 01:50 AM	#11
Wei240 Nissanaholic! Join Date: Sep 2002 Location: socal Posts: 1,778 Trader Rating: (0) Feedback Score: 0 reviews	i bought an apex n1, used stock gaskets from nissan dealer, alot of aftermarket ones are paperish... stock nissan ones are only 5-10 bucks from the dealer, and speaking of which i have an extra set somewhere....

11-01-2004, 01:56 AM	#12
TheSnail Nissanaholic! Join Date: Jan 2004 Location: Marietta Georgia Age: 42 Posts: 2,434 Trader Rating: (0) Feedback Score: 0 reviews	It will fit, but there is one problem. The center hole of your stock exhaust is 2" diameter, for a 3in exh, you would have a .5" wall all around, which would not do anything but create turbulence. Though 60mm is = to 2.36", it wont mater. If you plan on Na all the way, then it should be good enough, but if you are going turbo, you have failed

11-03-2004, 01:44 PM	#17
Dream240 Nissanaholic! Join Date: Dec 2002 Location: Inland Empire, California Age: 46 Posts: 2,188 Trader Rating: (8) Feedback Score: 8 reviews	wait...(bulb flickered again)....this would only apply to the one the mounts the new exhaust to the stock fake cat. The gasket for the two exhaust pipes mounting together will need to be cut out appropriately or get the right size from a muffler shop. sorry guys... As far as the material, the Nissan ones are metal based gaskets, they looked like metal and everything but they're flexible like paper, good stuff. Most muffler shops should have this quality gasket in stock to fit what you need. __________________ Don't mess with my monkey...he's loaded.

11-01-2004, 02:09 AM	#18
Wei240 Nissanaholic! Join Date: Sep 2002 Location: socal Posts: 1,778 Trader Rating: (0) Feedback Score: 0 reviews	oh yeah, didn't post up, but i have s13 dohc, just like he original poster, so stock gasket is fine... going turbo one day, just don't know when...

11-01-2004, 01:41 PM	#19
andrave BANNED Join Date: Apr 2002 Location: Burton WV Posts: 2,350 Trader Rating: (0) Feedback Score: 0 reviews	go to autozone and they can match them up, thats what I did. I got 2.5 gaskets that fit mine, they were OEM on a jeep cherokee or some shit.

11-02-2004, 01:08 AM	#20
Got Sileighty? Zilvia Addict Join Date: Dec 2002 Location: SoCaL Age: 46 Posts: 761 Trader Rating: (0) Feedback Score: 0 reviews	wei, u still have those gaskets? i need 2 of them ...i guess im gonna go with the stock gaskets, problem is they cost $12 at the dealer!!!! then i went to like 2 autozones, a pepboys, and a kragen, and none of them seem to have any in stock...maybe ill try what andrave suggested. thanks!...but wei, if u have 2 of them, let me know.

11-02-2004, 01:26 AM	#22
Wei240 Nissanaholic! Join Date: Sep 2002 Location: socal Posts: 1,778 Trader Rating: (0) Feedback Score: 0 reviews	yeah i do, two as in 2 pieces, it's sold as a set, as in 1 set = 2 pieces, (i'm pretty sure, it's actually in my glove compartment i think, i'll go look later), i guess pm me for more info...

11-02-2004, 12:19 PM	#24
andrave BANNED Join Date: Apr 2002 Location: Burton WV Posts: 2,350 Trader Rating: (0) Feedback Score: 0 reviews	yeah buy smaller ones and use a dremel or something.

11-02-2004, 01:57 PM	#25
Wei240 Nissanaholic! Join Date: Sep 2002 Location: socal Posts: 1,778 Trader Rating: (0) Feedback Score: 0 reviews	damn, just pay a little to get nissan ones.. it only costs a couple of tacos more...

11-02-2004, 10:38 PM	#26
andrave BANNED Join Date: Apr 2002 Location: Burton WV Posts: 2,350 Trader Rating: (0) Feedback Score: 0 reviews	newsflash: nissan ones don't fit

11-03-2004, 01:56 PM	#28
andrave BANNED Join Date: Apr 2002 Location: Burton WV Posts: 2,350 Trader Rating: (0) Feedback Score: 0 reviews	no one listens to me. go to a fucking parts store and have at it, they have ones that will work.

11-03-2004, 04:40 PM	#30
axiomatik Post Whore! Join Date: Dec 2003 Location: ATL Posts: 4,702 Trader Rating: (0) Feedback Score: 0 reviews	Just go to a parts store, you can find gaskets in a range of sizes, 2", 2.5", 3", in lead, copper, paper. You don't need to go to the dealer or move it from some other spot. Find out what size you need, 2 or 3 bolt holes, and go to autozone or whatever.