S14 Indicator/Hazard Problem HELP!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

HULKS14 · 05-26-2019, 12:40 AM

so ive recently changed from a Sr20de to a Sr20det
and ive come to an issue with my lights.
When indicating left or right my hazard lights come on checked all the fuses everything is good im baffled with what to do?

any help would be amazing cheers!

LoSt180 · 05-26-2019, 09:18 AM

The turn signal stalk can be going bad. Only the reverse lights are connected to the trans wiring harness, so this really doesn't have anything to do with the engine swap. Unless of course you did some extra wiring work that you failed to mention.

Kingtal0n · 05-26-2019, 10:29 AM

also try messing with the hazard button

HULKS14 · 05-27-2019, 01:02 AM

i did however attempt to delete alot of my dash loom but the hazard switch had like 3 red/pink wires spliced between them

, i do believe it could be the turn signal stalk failing...

05-26-2019, 12:40 AM	#1
HULKS14 Join Date: May 2019 Location: new Zealand Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	S14 Indicator/Hazard Problem HELP!!! so ive recently changed from a Sr20de to a Sr20det and ive come to an issue with my lights. When indicating left or right my hazard lights come on checked all the fuses everything is good im baffled with what to do? any help would be amazing cheers!

05-26-2019, 09:18 AM	#2
LoSt180 Zilvia FREAK! Join Date: May 2013 Location: MD Posts: 1,049 Trader Rating: (18) Feedback Score: 18 reviews	The turn signal stalk can be going bad. Only the reverse lights are connected to the trans wiring harness, so this really doesn't have anything to do with the engine swap. Unless of course you did some extra wiring work that you failed to mention.

05-26-2019, 10:29 AM	#3
Kingtal0n Post Whore! Join Date: Jul 2005 Location: South Florida Age: 42 Posts: 4,829 Trader Rating: (17) Feedback Score: 17 reviews	also try messing with the hazard button

05-27-2019, 01:02 AM	#4
HULKS14 Join Date: May 2019 Location: new Zealand Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	i did however attempt to delete alot of my dash loom but the hazard switch had like 3 red/pink wires spliced between them , i do believe it could be the turn signal stalk failing...