Parting out 97 KA engine - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

tom1192 · 11-29-2004, 04:42 PM

I have an engine out of a 97 S14 with approx. 90k miles that I am parting out and has been completely torn down and parts are ready to ship/pick up. Here is what I have:

Block- excellent condition, no gouges in the cylinder walls and still shiny. $50

Head- same condition, lifters and shims still nice and smooth. Valves have not been removed but cams have.$40

Cams- both intake and exhaust, same condition with gears still attached. $20 each

Intake manifold- Same condition, upper and lower have been separated and still have most of the sensors and such attached. $40

Crank- Good condition. Number 2 journal will need to be honned, ground for an oversized bearing. $50

Those are the big pieces and I have other stuff like the valve cover, upper and lower chain covers as well as a ton of bolts. I have 3 good piston/rod sets also. I am located in the Dallas area and prices DO NOT include shipping and are OBO. Buyer will pay shipping so keep in mind that hese pieces are heavy.

If there is something you need but don't see it listed e-mail me and I will see if I have it. I do not have the tranny, alternator or AC parts but I do have motor mounts, exhaust manifold with O2 sensor and starter.

[email protected]

I will also soon be selling my '98 S14. 62k miles, 5 speed, black. Keep that in mind if you are looking for a project cause it will be available in late January-February.

Pics of everything available via e-mail.

tom1192 · 12-02-2004, 04:31 PM

Re-adjusting prices:

First $150 will get everything I have from this engine and all the misc. parts also. It needs to go!!

Pick up only on this offer. I've done the dirty part of teardown so it is setup for a rebuild.

11-29-2004, 04:42 PM	#1
tom1192 Join Date: Nov 2004 Location: Dallas Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Parting out 97 KA engine I have an engine out of a 97 S14 with approx. 90k miles that I am parting out and has been completely torn down and parts are ready to ship/pick up. Here is what I have: Block- excellent condition, no gouges in the cylinder walls and still shiny. $50 Head- same condition, lifters and shims still nice and smooth. Valves have not been removed but cams have.$40 Cams- both intake and exhaust, same condition with gears still attached. $20 each Intake manifold- Same condition, upper and lower have been separated and still have most of the sensors and such attached. $40 Crank- Good condition. Number 2 journal will need to be honned, ground for an oversized bearing. $50 Those are the big pieces and I have other stuff like the valve cover, upper and lower chain covers as well as a ton of bolts. I have 3 good piston/rod sets also. I am located in the Dallas area and prices DO NOT include shipping and are OBO. Buyer will pay shipping so keep in mind that hese pieces are heavy. If there is something you need but don't see it listed e-mail me and I will see if I have it. I do not have the tranny, alternator or AC parts but I do have motor mounts, exhaust manifold with O2 sensor and starter. [email protected] I will also soon be selling my '98 S14. 62k miles, 5 speed, black. Keep that in mind if you are looking for a project cause it will be available in late January-February. Pics of everything available via e-mail.

12-02-2004, 04:31 PM	#2
tom1192 Join Date: Nov 2004 Location: Dallas Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Re-adjusting prices: First $150 will get everything I have from this engine and all the misc. parts also. It needs to go!! Pick up only on this offer. I've done the dirty part of teardown so it is setup for a rebuild.