Go ahead, make fun

[twitchy]

Well, im going to do it.

I want to put a 350Z muffler on my 240. I dont know why, but i just do. Something different. You can get them for a steal off ebay, and its going to have to be mounted sideways with some creative plumbing to bring the tips out side by side in the same cutout, but once i measure and check for sure, im thinkin its doable. I wonder how it will sound.......im going to be putting my header and high flow cat and resonator on at the same time..

Commence flaming procedures........now.

[XxJaPxOxNeEs23xX]

i wanna see how it looks and sounds. good luck. nd post pics wen your done

[zero.counter]

This will be interesting to see. The outcome of your prospective project that is.

[twitchy]

i wonder what makes the sound of the 350Z more....the engine or the muffler

[O-Mikey]

Yeah, good luck, can't wait to see how it turns out/what it sounds like. Post pics and a video of when its done and what it sounds like.

[mr_240sx]

wow, thats a new idea lol, i am very interested to see pictures and a sound file when you are finished!

[sykikchimp]

those mufflers are huge. your gonna have a hell of a time not only making it fit, but making a dual inlet/dual outlet muffler do what you need.

but in the spirit of ingenuity, Good luck!

[TokyoNights]

Dual exhaust on a stock body? dookie..And why have dual on a 4 cyl? Either way Id still like to see it.

[Ghettokracker71]

Awsome Idea. Can't wait to see how it turns out...gotta post vids of the sound ,too

[*NismoS13*]

I too am interested in seeing how this turns out....definitely post some pics when it's all said and done!

[DriftDragon28]

You must keep us informed of this. If you can pull it off and it sounds/looks good you may just start a trend.

[justinhustle]

ok heres an idea...hear me out on this

go to fleabay

buy 2 cheapo apexi knock offs for 40 bux

go to muffler shop

have em make a single pipe with dual exits

weld

weld more

drive away with your civic style fake duals

[wootwoot]

space will be a definite bitch

[projectRDM]

I'm at a loss for words.

It's not going to sound any different than any other muffler of the same size/dimensions. And it's a lot more work to make it fit. But if you cut out the spare tire well anything's possible.

[old_s13]

Originally Posted by R240NA

I'm at a loss for words.

It's not going to sound any different than any other muffler of the same size/dimensions. And it's a lot more work to make it fit. But if you cut out the spare tire well anything's possible.

i dont know why people (especially old schoolers like ourselves) even bother posting in threads like this.....

but its just too fun talking shit.

350Z muffler (stock) in a 240SX.. i hope your car explodes and bursts into flames.

[luisgonz]

"old s13" funny shit very funny your the best commentor on this forums

[SlideStar]

Originally Posted by old_s13

i hope your car explodes and bursts into flames.

Sorry but that idea sucks. Don't waste your time.

[WeldingHank]

its the engine that makes the noise. the exhaust has very little to do with it.

[tsunami0ne]

Originally Posted by WeldingHank

its the engine that makes the noise. the exhaust has very little to do with it.

maybe he's doing it for the looks? uniqueness ? i dunno. If it's for the 350z sound... why the hell would you want your car to sound like a walrus being violated?

[smellslikecurry]

i dnno what kind of 350z u hear but mine definitely doesnt sound like a walrus being violated...as for twitchy...good luck but imo its going to end up costing you more in the long run

[twitchy]

the muffler will be cheap-fabrication work to install it wont be too bad. What I save on NOT buying a catback should more than justify it.

its the measuring i need to check out. Im not cutting the spare tire well out. The outlets will be both on the same side in the original location, im not going dual as in one on each side. The engine definitely gives the Z its sound, but there is a certain distinctive note i like about it that i hope the muffler will duplicate on my car.


I know space will be tight, it might turn out to be impossible even, but i need to get under and measure it up. The other option i had was to mount the muffler up toward the middle of the car but again i have to measure.

It will just have to wait till spring to see, thats when im doing it all. Chimp, the Z muffler is one inlet 2 outlets, not 2 and 2.....as well if anyone happens to know the dimensions of the Z muffler or where to get this, let me know.

Originally Posted by old_s13

i dont know why people (especially old schoolers like ourselves) even bother posting in threads like this.....

but its just too fun talking shit.

350Z muffler (stock) in a 240SX.. i hope your car explodes and bursts into flames.

Well then, why dont you invent some kind of hack job to make it fit, and ill pay you $9,000 for it.

[final act]

you should really take time thinking about it.....and how it will afect anything in the long run......some ideas aint always good ideas, again think about it....Ive had ideas that first sounded good but in the end wouldent work out,good luck

[zero.counter]

Originally Posted by twitchy

Well then, why dont you invent some kind of hack job to make it fit, and ill pay you $9,000 for it.

Come on know. You said you would be ready to be flamed and would expect someone to disagree (I know, you never said that you would not respond). But what he does is not any different from making an SR fit into a USDM 240 (all the wiring and swapping), or converting an auto to 5spd (again, more wiring, swapping parts, etc).

Just let it go...

[mellojoe]

I just don't get it.

You are going to put the muffler on your car? Why? What to you hope to achieve? Do you want a dual exit exhaust system?

Or do you plan on buying the entire exhaust system off a 350z from eBay? And you want to use the whole thing to replace your stock exhaust system? And this will be cheaper than buying a pre-fabbed exhuast made specifically for the 240?

Again? WHY???? If you want to save money, just drive to a muffler shop and have them build one. Do you know how inexpensive it is to have someone weld a couple of 2.5" stainless steel pipes under the car? And then just pick an aftermarket muffler (which they will probably have in stock) and have them weld that on the end. Or just leave it straight pipe.

Cheap. Done. And you won't have a rice'd 240.

[blu808]

i just trew away a bunch of those muflers. You do know they weigh like 45lbs right?

Anyways, whatever floats your boat.

[justinhustle]

this topic is retarted

its a horrid idea, its a pointless idea. its a waste of cash

for someone with a post count as high as yours is....you shouldve learned a lil bit more by now?

youre like making a 2 muffler version of an n1 dual....to serve what purpose who in gods name knows...

but have at it and post pics so i can laugh for a lil bit

[Dousan_PG]

hahaha you are pathetic
fucking canadians.

[aa87]

OMG, my friend has a stock rx8 exhaust, im gonna try to fit that mug in, 2.5 inch piping, ultra NA power, JDM!

[Bryants95240sx]

i just removed my dads stock exhaust system on his 350z to install a injen ses exhaust and that freaking muffler is huge. Your gonna have a hella time getting that thing under the 240 .and like blu808 said its heavy trust me i know it fell on my chest lol.

[nissantuner22]

the cam timing of an engine has a lot to do with exhaust tone. that and displacement (the amount of air coming through the muffler) thats why a honda 1.6 liter sounds like shit with a flowmaster, but a V8 sounds better. just food for thought. Good luck!