Fan wiring question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Rittmeister · 08-02-2005, 07:46 AM

I am in the middle of replacing my Flexalite dual 10" setup with Altima fans. They're already trimmed and mounted but I'm having trouble with the wiring.

I've got relays and a controller (Pivot) wired in so that's no problem but I've had no success in figuring out which wires are which on the fans themselves.

I know the Altima fans are two-speed units; I'd like them to run on high when they run. I've read several conflicting reports on which wires are which.

Can someone tell me for certain which wires are power and which wires are ground, to run the fans on high speed?

TIA

SochBAT · 08-02-2005, 07:51 AM

You should have searched. Its been covered for shizzle.

http://www.240sx.org/links/installs/efans/index.html
http://www.240sx.org/links/installs/...ctric_fans.htm
http://www.240sx.org/links/installs/...an_install.htm

Those should help you. And thanks for searching.

SR240DET · 08-02-2005, 12:00 PM

Quote:

Originally Posted by sochbat

You should have searched. Its been covered for shizzle.

http://www.240sx.org/links/installs/efans/index.html
http://www.240sx.org/links/installs/...ctric_fans.htm
http://www.240sx.org/links/installs/...an_install.htm

Those should help you. And thanks for searching.

that didnt answer any part of his question....

Rittmeister · 08-02-2005, 12:08 PM

Quote:

Originally Posted by SR240DET

that didnt answer any part of his question....

I'm glad I'm not the only one who noticed...

I just wired them according to Replicant_S14's suggestion and they run fine. I'm eventually going to install a switch in the ground side to have a hi/lo option but for now I'm good to go.

Thanks to all who answered my questions!

Rittmeister · 08-02-2005, 08:51 AM

OK.

1. I searched. Didn't find my answer. I've seen all of those writeups and they don't help me a bit. For the record, I've been running the 10" fan setup with relays and Pivot controller for months now with no trouble. I wasn't asking how to wire fans up.

2. You didn't read my question carefully, and I admit on re-reading it that I worded it poorly.

So, I'll re-ask it:

Which wires ON THE ALTIMA FANS are power and ground for the high speed fan setting? There are four wires sticking out of each motor, black/blue/green/yellow, and I simply need to know which are which.

Thanks again.

pr240sx · 08-02-2005, 09:06 AM

Note that you need to energize both pairs to use high speed setting.
Also note that each pair is separated. Apply same polarity to each one. Black/blue are ground and green/yellow are positive.
To use the low speed, only apply current to one set (black- green+ or blue- yellow+) it does NOT matter.
Alti fans blow quite hard at high speed, they also could drain your battery quite fast. For normal driving, the low speed is enough.

Rittmeister · 08-02-2005, 09:25 AM

Are you absolutely sure on the colors? I powered blue and grounded black (on another thread's advice) and the fan came on (this was just a test), but you're saying they're both ground wires.

I'm really confused here.

Replicant_S14 · 08-02-2005, 10:21 AM

Quote:

Originally Posted by Rittmeister

Are you absolutely sure on the colors? I powered blue and grounded black (on another thread's advice) and the fan came on (this was just a test), but you're saying they're both ground wires.

I'm really confused here.

Blue/Green to "+", Black/Yellow to "-" = fan on high.

pr240sx · 08-03-2005, 09:05 AM

I listed the colors just to reference.
You can use whatever polarity on whatever wires. They will always turn on on the right direction.
Anyway, glad you got it to work.

08-02-2005, 07:46 AM	#1
Rittmeister Zilvia FREAK! Join Date: Jan 2003 Location: Cincinnati OH Age: 48 Posts: 1,033 Trader Rating: (9) Feedback Score: 9 reviews	Fan wiring question I am in the middle of replacing my Flexalite dual 10" setup with Altima fans. They're already trimmed and mounted but I'm having trouble with the wiring. I've got relays and a controller (Pivot) wired in so that's no problem but I've had no success in figuring out which wires are which on the fans themselves. I know the Altima fans are two-speed units; I'd like them to run on high when they run. I've read several conflicting reports on which wires are which. Can someone tell me for certain which wires are power and which wires are ground, to run the fans on high speed? TIA

08-02-2005, 07:51 AM	#2
SochBAT Post Whore! Join Date: Dec 2004 Location: Abilene, TX Age: 39 Posts: 6,428 Trader Rating: (9) Rides Gallery: SochBAT Feedback Score: 9 reviews	You should have searched. Its been covered for shizzle. http://www.240sx.org/links/installs/efans/index.html http://www.240sx.org/links/installs/...ctric_fans.htm http://www.240sx.org/links/installs/...an_install.htm Those should help you. And thanks for searching.

08-02-2005, 08:51 AM	#5
Rittmeister Zilvia FREAK! Join Date: Jan 2003 Location: Cincinnati OH Age: 48 Posts: 1,033 Trader Rating: (9) Feedback Score: 9 reviews	OK. 1. I searched. Didn't find my answer. I've seen all of those writeups and they don't help me a bit. For the record, I've been running the 10" fan setup with relays and Pivot controller for months now with no trouble. I wasn't asking how to wire fans up. 2. You didn't read my question carefully, and I admit on re-reading it that I worded it poorly. So, I'll re-ask it: Which wires ON THE ALTIMA FANS are power and ground for the high speed fan setting? There are four wires sticking out of each motor, black/blue/green/yellow, and I simply need to know which are which. Thanks again.

08-02-2005, 09:06 AM	#6
pr240sx Zilvia Addict Join Date: Jan 2002 Posts: 627 Trader Rating: (0) Feedback Score: 0 reviews	Note that you need to energize both pairs to use high speed setting. Also note that each pair is separated. Apply same polarity to each one. Black/blue are ground and green/yellow are positive. To use the low speed, only apply current to one set (black- green+ or blue- yellow+) it does NOT matter. Alti fans blow quite hard at high speed, they also could drain your battery quite fast. For normal driving, the low speed is enough.

08-02-2005, 09:25 AM	#7
Rittmeister Zilvia FREAK! Join Date: Jan 2003 Location: Cincinnati OH Age: 48 Posts: 1,033 Trader Rating: (9) Feedback Score: 9 reviews	Are you absolutely sure on the colors? I powered blue and grounded black (on another thread's advice) and the fan came on (this was just a test), but you're saying they're both ground wires. I'm really confused here.

08-03-2005, 09:05 AM	#9
pr240sx Zilvia Addict Join Date: Jan 2002 Posts: 627 Trader Rating: (0) Feedback Score: 0 reviews	I listed the colors just to reference. You can use whatever polarity on whatever wires. They will always turn on on the right direction. Anyway, glad you got it to work.