300zx calipers - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ernpob · 11-18-2005, 03:37 PM

--------------------------------------------------------------------------------
Rebuilt 300zx Iron calipers for $200.00 coming in 1 week
Rebuilt 300zx Aluminum calipers for $250.00. includes shipping
30mm (measured with micrometer)
sand blasted
new o-rings and gaskets.
comes with clips, springs, pins, and shims.
no pads (get your own from Pep Boys)
No 300zx master brake cylinder (also get it from Pep Boys for $50.00)

I know what you guys are thinking way should I buy these calipers and not the others. I'll tell you why, PITS, thats why. All those calipers you see for sale rebuilt or not could have dangerous pitting on the pistons. This pitting could cause brake failure and no one tells you this but I do. When I rebuild my calipers, I micropolish the pistons to a mirror like finish. So smooth, the absoult best seal between the pistons and the o-rings. I also clean out the tubes inside the calipers. Dangerous amounts of sand from sandblasting could have found its way to these tubes, but I dont take the chance. I completely disassemble the calipers to clean out these tubes.

Check out this link for the pics
http://www.imagestation.com/album/in...?id=2117573300.

I only take paypal or cash on pickup.

PLEASE SEND QUESTIONS TO
[email protected]

NO REPLYS, EMAILS ONLY

p.s. check out my other Imagestation albums for some hot import model pics from D1 and the JGTC.
__________________

punch · 11-18-2005, 04:37 PM

I am interested in the aluminium calipers, shoot me an e-mail [email protected]

Liger · 11-18-2005, 07:14 PM

link failed

are these complete front and back?

ernpob · 11-18-2005, 08:24 PM

Just the fronts and please send request and responses to
[email protected]

zads · 11-19-2005, 02:41 AM

Just so you know.

Quoted from 300zx factory service manual:
"Caution:
Piston sliding surface is plated. Do not polish with emery paper even if rust or foreign materials are stuck to sliding surface."

CHARLIE2020 · 11-19-2005, 12:03 PM

You got email.......I've got Q45 brakes all around right now and im running G35c wheels and in the front I got about 2inch's of room until my Q45 calipers could even contact the spokes on the inner side so I need to find out if these would fit becasue I will not use spacers.

ernpob · 11-19-2005, 07:16 PM

Thanks for the info, but I did not use emery cloth on the pistons but a polishing compound.

11-18-2005, 03:37 PM	#1
ernpob Leaky Injector Join Date: Nov 2003 Location: LA Posts: 121 Trader Rating: (0) Feedback Score: 0 reviews	300zx calipers -------------------------------------------------------------------------------- Rebuilt 300zx Iron calipers for $200.00 coming in 1 week Rebuilt 300zx Aluminum calipers for $250.00. includes shipping 30mm (measured with micrometer) sand blasted new o-rings and gaskets. comes with clips, springs, pins, and shims. no pads (get your own from Pep Boys) No 300zx master brake cylinder (also get it from Pep Boys for $50.00) I know what you guys are thinking way should I buy these calipers and not the others. I'll tell you why, PITS, thats why. All those calipers you see for sale rebuilt or not could have dangerous pitting on the pistons. This pitting could cause brake failure and no one tells you this but I do. When I rebuild my calipers, I micropolish the pistons to a mirror like finish. So smooth, the absoult best seal between the pistons and the o-rings. I also clean out the tubes inside the calipers. Dangerous amounts of sand from sandblasting could have found its way to these tubes, but I dont take the chance. I completely disassemble the calipers to clean out these tubes. Check out this link for the pics http://www.imagestation.com/album/in...?id=2117573300. I only take paypal or cash on pickup. PLEASE SEND QUESTIONS TO [email protected] NO REPLYS, EMAILS ONLY p.s. check out my other Imagestation albums for some hot import model pics from D1 and the JGTC. __________________ __________________ http://www.zilvia.net/f/showthread.php?t=21036 Last edited by ernpob; 11-18-2005 at 08:23 PM.. Reason: bad link

11-18-2005, 08:24 PM	#4
ernpob Leaky Injector Join Date: Nov 2003 Location: LA Posts: 121 Trader Rating: (0) Feedback Score: 0 reviews	Just the fronts and please send request and responses to [email protected] __________________ http://www.zilvia.net/f/showthread.php?t=21036

11-19-2005, 12:03 PM	#6
CHARLIE2020 Zilvia Addict Join Date: Jan 2005 Location: Socal Fontana Age: 48 Posts: 784 Trader Rating: (0) Feedback Score: 0 reviews	You got email.......I've got Q45 brakes all around right now and im running G35c wheels and in the front I got about 2inch's of room until my Q45 calipers could even contact the spokes on the inner side so I need to find out if these would fit becasue I will not use spacers. __________________

11-19-2005, 07:16 PM	#7
ernpob Leaky Injector Join Date: Nov 2003 Location: LA Posts: 121 Trader Rating: (0) Feedback Score: 0 reviews	Thanks for the info, but I did not use emery cloth on the pistons but a polishing compound. __________________ http://www.zilvia.net/f/showthread.php?t=21036

11-18-2005, 04:37 PM	#2
punch Leaky Injector Join Date: Jan 2005 Location: south florida Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	I am interested in the aluminium calipers, shoot me an e-mail [email protected]

11-18-2005, 07:14 PM	#3
Liger Zilvia Member Join Date: Mar 2005 Location: SoCal Posts: 196 Trader Rating: (0) Feedback Score: 0 reviews	link failed are these complete front and back?

11-19-2005, 02:41 AM	#5
zads Zilvia Junkie Join Date: Nov 2004 Location: san diego, ca Age: 41 Posts: 303 Trader Rating: (0) Feedback Score: 0 reviews	Just so you know. Quoted from 300zx factory service manual: "Caution: Piston sliding surface is plated. Do not polish with emery paper even if rust or foreign materials are stuck to sliding surface."