<<~~Walbro Fuel Pump~~>> - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

IceTekGuy · 11-27-2001, 08:44 PM

what type of application would i need for my SR motor? possibly one for a 300ZX?
would that be sufficient enough?

Kid Zelda · 11-27-2001, 09:20 PM

Walbeo has the 190lph and 255lph fuel pumps. Use only the high-pressure 255lph(part# GSS341) fuel pump with the SR motor.

(Edited by Kid Zelda at 9:22 pm on Nov. 27, 2001)

ZeroGS14 · 11-28-2001, 04:41 AM

you can use the fuel pump from a 300zx twin turbo

IceTekGuy · 11-28-2001, 10:50 AM

would anyone suggetst  gettin 550 injectors, and a 300zx fuel rail?
or do i NOT need those things? just the pump...?

Kid Zelda · 11-28-2001, 11:44 AM

No I don't suggest getting' 550 injector without up-grading the MAF and reprogramming the ECU for that application.

MattS14 · 11-28-2001, 11:48 AM

will the walbeo 255lph fuel pump flow enough to support 350hp on the sr motor

tristarx · 11-29-2001, 02:57 PM

Warlboro 255 high pressure will support as much hp you can possibly put on a daily driven SR.

500hp application is not a problem.

Tx.

Wayne
<a href="http://www.phase2motortrend.com

" target="_blank">http://www.phase2motortrend.com

</a>

IceTekGuy · 11-29-2001, 09:16 PM

does it utilize the stock pump **holder/bracket** <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'>?
or is there a kit i must buy along with it?
cause i know it comes witht the lines and stuff, but anything else that comes seperate that i must buy?

tristarx · 11-30-2001, 03:40 AM

Like the Z32 fuel pump, just clamp it to the fuel pump backbone.  You don't need any kit, if you play with it abit you will find out it's pretty straight forward like the Z pump.

Tx.

Wayne
http://www.phase2motortrend.com

240S15DETE6K · 11-30-2001, 08:39 AM

Lets get a group buy on this 255lph pump, I need one too!

11-29-2001, 02:57 PM	#7
tristarx Leaky Injector Join Date: Nov 2001 Posts: 140 Trader Rating: (0) Feedback Score: 0 reviews	Warlboro 255 high pressure will support as much hp you can possibly put on a daily driven SR. 500hp application is not a problem. Tx. Wayne <a href="http://www.phase2motortrend.com " target="_blank">http://www.phase2motortrend.com </a> __________________ Wayne[br]http://www.phase2motortrend.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-27-2001, 08:44 PM	#1
IceTekGuy Zilvia Junkie Join Date: Sep 2001 Posts: 362 Trader Rating: (0) Feedback Score: 0 reviews	what type of application would i need for my SR motor? possibly one for a 300ZX? would that be sufficient enough?

11-27-2001, 09:20 PM	#2
Kid Zelda BANNED Join Date: Oct 2001 Posts: 2,347 Trader Rating: (0) Feedback Score: 0 reviews	Walbeo has the 190lph and 255lph fuel pumps. Use only the high-pressure 255lph(part# GSS341) fuel pump with the SR motor. (Edited by Kid Zelda at 9:22 pm on Nov. 27, 2001)

11-28-2001, 04:41 AM	#3
ZeroGS14 Zilvia Member Join Date: Oct 2001 Posts: 181 Trader Rating: (0) Feedback Score: 0 reviews	you can use the fuel pump from a 300zx twin turbo

11-28-2001, 10:50 AM	#4
IceTekGuy Zilvia Junkie Join Date: Sep 2001 Posts: 362 Trader Rating: (0) Feedback Score: 0 reviews	would anyone suggetst  gettin 550 injectors, and a 300zx fuel rail? or do i NOT need those things? just the pump...?

11-28-2001, 11:44 AM	#5
Kid Zelda BANNED Join Date: Oct 2001 Posts: 2,347 Trader Rating: (0) Feedback Score: 0 reviews	No I don't suggest getting' 550 injector without up-grading the MAF and reprogramming the ECU for that application.

11-28-2001, 11:48 AM	#6
MattS14 Leaky Injector Join Date: Nov 2001 Posts: 72 Trader Rating: (0) Feedback Score: 0 reviews	will the walbeo 255lph fuel pump flow enough to support 350hp on the sr motor

11-29-2001, 09:16 PM	#8
IceTekGuy Zilvia Junkie Join Date: Sep 2001 Posts: 362 Trader Rating: (0) Feedback Score: 0 reviews	does it utilize the stock pump holder/bracket <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'>? or is there a kit i must buy along with it? cause i know it comes witht the lines and stuff, but anything else that comes seperate that i must buy?

11-30-2001, 03:40 AM	#9
tristarx Leaky Injector Join Date: Nov 2001 Posts: 140 Trader Rating: (0) Feedback Score: 0 reviews	Like the Z32 fuel pump, just clamp it to the fuel pump backbone.  You don't need any kit, if you play with it abit you will find out it's pretty straight forward like the Z pump. Tx. Wayne http://www.phase2motortrend.com

11-30-2001, 08:39 AM	#10
240S15DETE6K Leaky Injector Join Date: Oct 2001 Posts: 95 Trader Rating: (0) Feedback Score: 0 reviews	Lets get a group buy on this 255lph pump, I need one too!