Engine Trouble: URGENT!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

240Stilo · 01-19-2003, 12:52 PM

At idle, my 95 makes a nasty rubbing sound that only gets worse when I turn the steering wheel. After a few minutes smoke starts to come out of the side where the intake manifold is located. I also got a nasty oil leak there so that could explain the smoke. But, I don't see how the smoke could relate to the noise. If you know how this relates, or if you have any advice let me know quick.

uiuc240 · 01-19-2003, 12:58 PM

Hmmm

Rubbing sound...worse when turning...check power steering system and pump??

Eric

240Stilo · 01-19-2003, 01:02 PM

Aww man....taking stuff apart?....I was hoping I could find a faster solution because I have to be at work now.

**mrmephistopheles** · 01-20-2003, 07:24 AM

I don't see where you got 'taking stuff apart' from uiuc's post. Anyway, you probably have a leaky PS line, so it'd be a good idea to check all your lines to find the leak & fix it quicky. Replacement steering racks are not cheap.

240Stilo · 01-20-2003, 09:09 PM

Quote:

Originally posted by mrmephistopheles
I don't see where you got 'taking stuff apart' from uiuc's post. Anyway, you probably have a leaky PS line, so it'd be a good idea to check all your lines to find the leak & fix it quicky. Replacement steering racks are not cheap.

I guess I got ahead of myself with "taking stuff apart." But Even if i did have a leak with the PS line wouldn't it still run the same as long as there was enough fluid?

wren240sx · 01-21-2003, 01:20 PM

Quote:

Originally posted by mrmephistopheles
I don't see where you got 'taking stuff apart' from uiuc's post. Anyway, you probably have a leaky PS line, so it'd be a good idea to check all your lines to find the leak & fix it quicky. Replacement steering racks are not cheap.

if i had my power steering burn out because of a leak would that make me have to get a steering rack or just replace the ps hoses and pump or whatever???

Neemo6 · 01-21-2003, 06:02 PM

Check your belts they might be worn or dry, you can put some belt dressing see if that helps.

Dream240 · 01-22-2003, 08:00 AM

Check your tie rod ends for busted seals, if the seals are broken replace them immediately!! Tie rod ends tend to dry out and fail while you're on a turn and send you off the road and into unhappy town.

They're about sixty bucks each at your Nissan dealer.
Also check your entire rack for any fluid leakage. They noise may be your rack assembly if it's already bad, cross your fingers!!

Have you had to refill the fluid constantly? If so how much?

240Stilo · 01-22-2003, 12:48 PM

Found the problem. My alternator was making the smoke AND the noise. I was using some belt dressing on the alternator pulley and it worked great, for 20 seconds. The noise just keeps coming back and the alternator keeps on smoking. I think I'm going to have to replace it. If anyone else has a remedy for this I'm all ears.

01-19-2003, 12:52 PM	#1
240Stilo Junkie Join Date: May 2002 Location: Socal Age: 41 Posts: 1,160 Trader Rating: (0) Feedback Score: 0 reviews	Engine Trouble: URGENT!! At idle, my 95 makes a nasty rubbing sound that only gets worse when I turn the steering wheel. After a few minutes smoke starts to come out of the side where the intake manifold is located. I also got a nasty oil leak there so that could explain the smoke. But, I don't see how the smoke could relate to the noise. If you know how this relates, or if you have any advice let me know quick. __________________ -Juan

01-19-2003, 12:58 PM	#2
uiuc240 Nissanaholic! Join Date: Apr 2002 Location: Naperville, IL Age: 46 Posts: 2,093 Trader Rating: (0) Feedback Score: 0 reviews	Hmmm Rubbing sound...worse when turning...check power steering system and pump?? Eric __________________ 2002 Mazda Protege5 1989 S13 w/SR20DET (sold)

01-19-2003, 01:02 PM	#3
240Stilo Junkie Join Date: May 2002 Location: Socal Age: 41 Posts: 1,160 Trader Rating: (0) Feedback Score: 0 reviews	Aww man....taking stuff apart?....I was hoping I could find a faster solution because I have to be at work now. __________________ -Juan

01-22-2003, 08:00 AM	#8
Dream240 Nissanaholic! Join Date: Dec 2002 Location: Inland Empire, California Age: 46 Posts: 2,188 Trader Rating: (8) Feedback Score: 8 reviews	Check your tie rod ends for busted seals, if the seals are broken replace them immediately!! Tie rod ends tend to dry out and fail while you're on a turn and send you off the road and into unhappy town. They're about sixty bucks each at your Nissan dealer. Also check your entire rack for any fluid leakage. They noise may be your rack assembly if it's already bad, cross your fingers!! Have you had to refill the fluid constantly? If so how much? __________________ Don't mess with my monkey...he's loaded.

01-22-2003, 12:48 PM	#9
240Stilo Junkie Join Date: May 2002 Location: Socal Age: 41 Posts: 1,160 Trader Rating: (0) Feedback Score: 0 reviews	Found the problem. My alternator was making the smoke AND the noise. I was using some belt dressing on the alternator pulley and it worked great, for 20 seconds. The noise just keeps coming back and the alternator keeps on smoking. I think I'm going to have to replace it. If anyone else has a remedy for this I'm all ears. __________________ -Juan

01-20-2003, 07:24 AM	#4
mrmephistopheles Magnanimous Justice Distribution Service Join Date: Mar 2002 Location: BFE Age: 23 Posts: 14,372 Trader Rating: (9) Rides Gallery: mrmephistopheles Feedback Score: 9 reviews	I don't see where you got 'taking stuff apart' from uiuc's post. Anyway, you probably have a leaky PS line, so it'd be a good idea to check all your lines to find the leak & fix it quicky. Replacement steering racks are not cheap.

01-21-2003, 06:02 PM	#7
Neemo6 Join Date: Jan 2003 Location: South Bend, In Age: 43 Posts: 32 Trader Rating: (0) Feedback Score: 0 reviews	Check your belts they might be worn or dry, you can put some belt dressing see if that helps.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode