Welded Dif. Will It Hold? PICS - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

MrFixIt · 02-01-2009, 05:53 PM

Just picked up this welded diff. Cracked it open and had a look at the welds. Never ran a welded before, but I know that if the welds aren't good/strong enough it can break and cause problems. Here's a pic...

Do you think these are beefy enough, or should I go over em' again with another bead?

Thanks in advance.

alexander500 · 02-01-2009, 05:59 PM

That's kind of a crappy pic, but it looks like a welded diff

It could be better, and it could be a lot worse.

I would worry about it.

BillWatcher · 02-01-2009, 06:00 PM

If you already have it open and you have a welder why not be safe and throw some extra love at it?!

bejota180sx · 02-01-2009, 06:04 PM

people learn MACRO you know the little flower thingy on your camera...

but it does look like you could do with a bit stronger weld... is it because of the picture or do you have metal shavings and stuff there by the gears? or is that the fluid making it look like that?

Ceepo · 02-01-2009, 06:07 PM

Looks as if its spatter from the weld, never hurts to throw a few beads on there, i would those look small and week, clean the spatter up around the gears and such to, dont want that to get in the bearings and make a whinning noise...

MrFixIt · 02-01-2009, 06:09 PM

Quote:

Originally Posted by bejota180sx

people learn MACRO you know the little flower thingy on your camera...

Yeah, it's a camera phone. Sorry, only thing I've got...

Quote:

Originally Posted by bejota180sx

but it does look like you could do with a bit stronger weld... is it because of the picture or do you have metal shavings and stuff there by the gears? or is that the fluid making it look like that?

That's primarially the fluid. When I drained it though the fluid was reeeeeally dark, and looked like it was filled with a mild/moderate ammount of metal shavings. As was the magnetic drain plug.

Just looking for some suggestions. I know I've seen pictures of other welded diffs with beads twice this big. Only reason why I ask.

R@ddy · 02-01-2009, 06:25 PM

noooo
looks like you need to weld it a little more

bejota180sx · 02-01-2009, 06:28 PM

if it has shavings, i think it would be good if you cleaned it out and took it someplace so they sand blasted it to clean up the spatter and all that... but get it welded again first... better safe than sorry...

Banegraphix · 02-01-2009, 06:52 PM

like everyone else has said might as well throw another bead on it while its open and make sure you get the slag cleaned out of it before running it. Oh and have fun in the rain its a shit load of fun.

hotlavaflow · 02-01-2009, 06:59 PM

I just did mine and the welds were def beefy. I would go over that again I wouldn't trust it.

MrFixIt · 02-01-2009, 07:02 PM

Thanks for all the input guys.

A buddy of mine has a little flux-core welder. I'm gonna see if he wouldn't mind going over em' again real quick.

Quote:

Originally Posted by Banegraphix

Oh and have fun in the rain its a shit load of fun.

Haha, yeeeeeeeeah. Welded w/ 195's should be interesting.

BoostedCoupe · 02-01-2009, 07:12 PM

i would weld it up some more it that was me. When i had mine welded up i got the whole middle section full of weld, when you look down at my spider gear's you cant see therw them its solid, basically even if my welds break the gears will NEVER be able to spin like they are suppouse to be.

Quote:

Originally Posted by cocainewhite240

weld more........be safe

This made me laugh, be safe in a welded diff thread.

gotspins13 · 02-01-2009, 07:24 PM

ya when i welded mine i didnt just weld the sides, i welded the whole centers and everything so it was completely solid

DriftMUH · 02-01-2009, 07:48 PM

yea man iono that might hold but to be safe id weld the gears to the side walls on both sides

nothing wrong with a little overkill

ATLspeed · 02-01-2009, 09:53 PM

weld some more in there...i busted 2 diffs with welds like that on my KA with just I/H/E lol. its scary as hell when it blows on you cuz you just hear a "CLUNK" and your like "wtf was that?!" then you find out the hard way that you are truely a one wheel wonder when the gear is only turning one axle

MrFixIt · 02-24-2009, 12:01 PM

Well, little update.

I had my buddy weld it up a some more, but we used a cheap-o fluxcore welder. Slag got everywhere. I tried as best I could to clean it all out, but I'm pretty sure some still got in the bearings. When driving now, it makes a semi-audible whining noise from the diff. It's not noticable with the windows down, but with the windows up and the radio off, you know it's there.

Also, the tire squealing. Holy shit hahaha. I park in a parking garage and I set off a car alarm with the tire squeal haha. I switched to some wider / better quality tires though and the squeal was cut more than in half.

Ran it at my first event ever and man, it's 10 times easier to swing that back end out than with the open.

All in all I'm really happy I did it. The car feels so much more solid. The wheel hop going around corners isn't even that bad, but I've yet to take it out in the rain.

Syncade · 02-24-2009, 08:46 PM

Quote:

Originally Posted by MrFixIt

Ran it at my first event ever and man, it's 10 times easier to swing that back end out than with the open.

You're silly

HPballer76 · 02-24-2009, 08:58 PM

Quote:

Originally Posted by Syncade

You're silly

this made me lol...

MrFixIt · 02-24-2009, 09:01 PM

Quote:

Originally Posted by Syncade

You're silly

Haha. True story.

neukin · 03-03-2009, 03:53 PM

Looks like im too late..
Thats CRAP redo.. like this, dont just cake metal in there awh!

Here is a picture, its done very very well along with a few tricks to make it even stronger.

In fact if you want me to do it... $55 with core or $85 no core, ship included. No drive gear attached.

Funny when i busted my open diff unwelded the drive shaft just spun and made awesome noises... no wheel moved anywhere.

-Alex

S13 curtis · 03-03-2009, 04:17 PM

you need to get a diff from taftboy on florida drift. people have beat them to shit for 2 yrs and still never break.

its $30 bucks and your open diff.

spacedog · 03-03-2009, 04:25 PM

gusset plates do wonders

SochBAT · 03-03-2009, 09:46 PM

or, if you want safety in terms of many happy users, not ONE has broken, blu808, aka Luke, aka WizardSleeves. haha.

Otto347 · 03-03-2009, 10:10 PM

I welded mine like neukin, made two .250" plates and went to work.

s13dan · 03-04-2009, 04:09 AM

Gussets and laying down some good welds. Shit cant be broken.

Jmac39 · 03-04-2009, 10:29 PM

Quote:

Originally Posted by neukin

Looks like im too late..
Thats CRAP redo.. like this, dont just cake metal in there awh!

Here is a picture, its done very very well along with a few tricks to make it even stronger.

In fact if you want me to do it... $55 with core or $85 no core, ship included. No drive gear attached.

Funny when i busted my open diff unwelded the drive shaft just spun and made awesome noises... no wheel moved anywhere.

-Alex

That sure isn't going to break......

neukin · 03-07-2009, 04:36 AM

We manage to break everything so we try to make it better, failure is success.

drifterken · 03-07-2009, 10:24 AM

screw welded... thoes things are weak sauce... buddy had it in his s14 went drifting for 3 days on it and popped a whole in his casing. if anything weld the SH*T outa it..

ZX88 · 03-07-2009, 10:37 AM

your going to want to weld that thing alot more if you want it to last.

neukin · 03-07-2009, 11:13 AM

Quote:

Originally Posted by drifterken

screw welded... thoes things are weak sauce... buddy had it in his s14 went drifting for 3 days on it and popped a whole in his casing. if anything weld the SH*T outa it..

the steel pumpkin cracked?

02-01-2009, 05:53 PM	#1
MrFixIt Zilvia Member Join Date: Jun 2008 Location: Gainesville / Melbourne Beach, FL Posts: 169 Trader Rating: (1) Feedback Score: 1 reviews	Welded Dif. Will It Hold? PICS Just picked up this welded diff. Cracked it open and had a look at the welds. Never ran a welded before, but I know that if the welds aren't good/strong enough it can break and cause problems. Here's a pic... Do you think these are beefy enough, or should I go over em' again with another bead? Thanks in advance.

02-01-2009, 06:00 PM	#3
BillWatcher Zilvia Junkie Join Date: Jul 2007 Location: Bellevue, Wa Age: 41 Posts: 324 Trader Rating: (0) Feedback Score: 0 reviews	If you already have it open and you have a welder why not be safe and throw some extra love at it?! __________________ http://walk2liv.blogspot.com/

02-01-2009, 06:07 PM	#5
Ceepo Nissanaholic! Join Date: Jan 2008 Location: Cedar City, Utah Posts: 2,007 Trader Rating: (9) Rides Gallery: Ceepo Feedback Score: 9 reviews	Looks as if its spatter from the weld, never hurts to throw a few beads on there, i would those look small and week, clean the spatter up around the gears and such to, dont want that to get in the bearings and make a whinning noise... __________________ TW: http://zilvia.net/f/cars-sale/390459...d9s-coils.html

02-01-2009, 06:59 PM	#10
hotlavaflow Zilvia FREAK! Join Date: Jul 2007 Location: BKLYN NYC Posts: 1,263 Trader Rating: (23) Feedback Score: 23 reviews	I just did mine and the welds were def beefy. I would go over that again I wouldn't trust it. __________________

02-01-2009, 07:48 PM	#14
DriftMUH Leaky Injector Join Date: Jul 2008 Location: Escondido Posts: 109 Trader Rating: (0) Feedback Score: 0 reviews	yea man iono that might hold but to be safe id weld the gears to the side walls on both sides nothing wrong with a little overkill __________________ "Im invisible and impossible to touch" ~Mr. Lif

02-01-2009, 05:59 PM	#2
alexander500 Zilvia Member Join Date: Feb 2007 Location: Maryland Age: 43 Posts: 299 Trader Rating: (8) Feedback Score: 8 reviews	That's kind of a crappy pic, but it looks like a welded diff It could be better, and it could be a lot worse. I would worry about it.

02-01-2009, 06:25 PM	#7
R@ddy Nissanaholic! Join Date: Jul 2008 Location: SoCal Age: 35 Posts: 1,632 Trader Rating: (32) Feedback Score: 32 reviews	noooo looks like you need to weld it a little more

02-01-2009, 06:52 PM	#9
Banegraphix Leaky Injector Join Date: Sep 2008 Location: Tampa Age: 43 Posts: 111 Trader Rating: (1) Feedback Score: 1 reviews	like everyone else has said might as well throw another bead on it while its open and make sure you get the slag cleaned out of it before running it. Oh and have fun in the rain its a shit load of fun.

02-01-2009, 07:24 PM	#13
gotspins13 Zilvia Addict Join Date: Nov 2008 Location: NorCAl//Sacramento Posts: 944 Trader Rating: (0) Feedback Score: 0 reviews	ya when i welded mine i didnt just weld the sides, i welded the whole centers and everything so it was completely solid

02-01-2009, 09:53 PM	#15
ATLspeed Zilvia Addict Join Date: Jan 2007 Location: Eden, MD, USA Age: 38 Posts: 921 Trader Rating: (14) Rides Gallery: ATLspeed Feedback Score: 14 reviews	weld some more in there...i busted 2 diffs with welds like that on my KA with just I/H/E lol. its scary as hell when it blows on you cuz you just hear a "CLUNK" and your like "wtf was that?!" then you find out the hard way that you are truely a one wheel wonder when the gear is only turning one axle __________________ 93 s13 Vert - 2jz/cd009 -- parted/sold 95 Supra Turbo

02-24-2009, 12:01 PM	#16
MrFixIt Zilvia Member Join Date: Jun 2008 Location: Gainesville / Melbourne Beach, FL Posts: 169 Trader Rating: (1) Feedback Score: 1 reviews	Well, little update. I had my buddy weld it up a some more, but we used a cheap-o fluxcore welder. Slag got everywhere. I tried as best I could to clean it all out, but I'm pretty sure some still got in the bearings. When driving now, it makes a semi-audible whining noise from the diff. It's not noticable with the windows down, but with the windows up and the radio off, you know it's there. Also, the tire squealing. Holy shit hahaha. I park in a parking garage and I set off a car alarm with the tire squeal haha. I switched to some wider / better quality tires though and the squeal was cut more than in half. Ran it at my first event ever and man, it's 10 times easier to swing that back end out than with the open. All in all I'm really happy I did it. The car feels so much more solid. The wheel hop going around corners isn't even that bad, but I've yet to take it out in the rain.

03-03-2009, 03:53 PM	#20
neukin Zilvia Member Join Date: Mar 2008 Location: Fort Wayne IN Posts: 174 Trader Rating: (5) Feedback Score: 5 reviews	Looks like im too late.. Thats CRAP redo.. like this, dont just cake metal in there awh! Here is a picture, its done very very well along with a few tricks to make it even stronger. In fact if you want me to do it... $55 with core or $85 no core, ship included. No drive gear attached. Funny when i busted my open diff unwelded the drive shaft just spun and made awesome noises... no wheel moved anywhere. -Alex __________________ Neukin Motor Development llc 399 River Bend CT Fort Wayne IN 46803 -->Neukin Store<-- -->DRIFT Clutch Store<--

03-03-2009, 04:17 PM	#21
S13 curtis Zilvia Addict Join Date: Jun 2008 Location: Orlando,FL Age: 34 Posts: 651 Trader Rating: (13) Feedback Score: 13 reviews	you need to get a diff from taftboy on florida drift. people have beat them to shit for 2 yrs and still never break. its $30 bucks and your open diff.

03-03-2009, 04:25 PM	#22
spacedog Zilvia Member Join Date: Jul 2005 Location: SoCal Posts: 204 Trader Rating: (3) Feedback Score: 3 reviews	gusset plates do wonders __________________

03-03-2009, 09:46 PM	#23
SochBAT Post Whore! Join Date: Dec 2004 Location: Abilene, TX Age: 39 Posts: 6,428 Trader Rating: (9) Rides Gallery: SochBAT Feedback Score: 9 reviews	or, if you want safety in terms of many happy users, not ONE has broken, blu808, aka Luke, aka WizardSleeves. haha.

03-04-2009, 04:09 AM	#25
s13dan Zilvia FREAK! Join Date: Aug 2003 Location: Springfield, Mo Posts: 1,519 Trader Rating: (2) Feedback Score: 2 reviews	Gussets and laying down some good welds. Shit cant be broken. __________________ 89 240sx hatch #933-the hot rod 91 240sx coupe #131,603-the daily

03-07-2009, 04:36 AM	#27
neukin Zilvia Member Join Date: Mar 2008 Location: Fort Wayne IN Posts: 174 Trader Rating: (5) Feedback Score: 5 reviews	We manage to break everything so we try to make it better, failure is success. __________________ Neukin Motor Development llc 399 River Bend CT Fort Wayne IN 46803 -->Neukin Store<-- -->DRIFT Clutch Store<--

03-07-2009, 10:24 AM	#28
drifterken Leaky Injector Join Date: Feb 2007 Location: so cal. Posts: 126 Trader Rating: (2) Feedback Score: 2 reviews	screw welded... thoes things are weak sauce... buddy had it in his s14 went drifting for 3 days on it and popped a whole in his casing. if anything weld the SH*T outa it..

03-07-2009, 10:37 AM	#29
ZX88 Post Whore! Join Date: Oct 2005 Location: ATX Age: 36 Posts: 2,946 Trader Rating: (8) Feedback Score: 8 reviews	your going to want to weld that thing alot more if you want it to last.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode