![]() |
|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#2 |
Zilvia FREAK!
![]() Join Date: Jan 2003
Location: glendale,CA
Age: 48
Posts: 1,094
Trader Rating: (8)
![]() ![]() Feedback Score: 8 reviews
|
is this an s13 motor into an s13 chassis? or s13 motor into an s14 chassis?
try www.nissansilvia.com if it is an s13 just lengthen the ignitor,power steering,maf(shielded wire),o2)shielded;i think). then the battery area wires; check out the archive of this site. you will see the wires for this part. i can't remember off hand. but here it goes: group the 2 sr20 brown wires into 1 wire.this should go into the inner brown wire of the ka24e harness. there is also another 2 wires that need to be grouped together. i forgot these now so check out the archieve. good luck. |
![]() |
![]() |
![]() |
#3 |
Zilvia Member
![]() |
For any of the wiring, http://www.srswap.com/f_faq.htm has most any answers you could look for. The list the 'how to' in different areas of concern. They should be able to tell you in the faq's area what needs to be done and how to do it.
__________________
..working on something that is slowly getting built up and restored.. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|