MD Blacktop SR20DET Engine project

[Otherworldview]

Hey guys, I've basically lost the drive to continue to rebuild my engine and want to dig myself out of some debt so I'm looking to sell off an engine I've been working on.

Currently the engine is torn down into crank, block, head with all the parts in boxes and all the bolts in baggies properly labeled. I also took a wire brush to coolant connectors and tried to clean brackets as best I could. As of now, I am not parting it out the set up unless I can find buyers for everything.

Included parts are:

1994 SR20DET black top engine (all accessories incl; ie power steering pump, alt, starter, flywheel...)
5speed transmission
Uncut wiring harness (aside from the MAF sensor)
z32 MAF & pigtail
Nissan gasket kit (still in box)
Nissan water pump (still in box)
Nismo thermostat (still in box)
OEM o2 sensor (still in baggie)
Top mount exhaust manifold
Top mount downpipe
Freddy intake
Deatschwerks 740cc injectors
Real Greddy intercooler (has a big dent on the bottom from a tow accident, but still works)
CP Pisons 86.5mm (still in box)
Eagle Rods (still in box)
ACL-X Main Bearings (Thrust Bearing included) (still in box)
Precision Turbo (.60 intake .63 exhaust)
Stock ECU
Enthalpy Tuned ECU (for injectors, turbo and 264 cams)
ACT NS1-XTSS (still in box)
Manual boost controller
Megan Racing Boost Gauge

Edit:
I have a Koyo radiator and should also have Samco radiator hoses (don't hold me just yet...)
Have a FPR
Cone air filter
Also for us SOHC guys I can throw in the DOHC power steering lines, DOHC tach, and DOHC throttle cable for additional $$$.

I think I've included everything I have. If I'm missing anything I'll post and re-edit this post. Pictures will be posted later this afternoon (mainly of post op).

Asking price is $2000
Thanks






(guess I do have those hoses if they're in the picture! XD


Sorry I can't get pics from MySpace, they just won't link. If you search for my screen name there you'll find pictures of the pistons, rods and bearings. You can also see the 300zx I'm trying to sell too lol



Edit: Minor description updates, and pictures

[Magical Trevor]

PM'd you...

[Jybfan04]

PM'd you....!!

[deukalionS14]

of course a great deal like this would come up when i cant affored to give the full price up front...good luck man! this should sale quick!! i wish i had the funds!!

[jarend]

price on the tranny shipped to 92122? pm me if you could thanks.

[Otherworldview]

As of right now I am not parting out the set up unless there's a buyer for everything.

[bb4_96]

sent you a pm

[Darksun280]

message sent
Edit: Just saw your not parting out free bump.

[tEckniks]

how much for just the dohc power steering lines.. i need them

[Otherworldview]

Alright,
had a buyer, he dipped, came back, and now has apparently gone "missing".

All is still for sale. AS OF NOW I'M NOT PARTING THIS OUT!

[Otherworldview]

Bump it up

[Otherworldview]

Last bump

I'm surprised no one's jumping on this! Engine alone is worth $1500. So you're getting forged pistons, rods, still in box ACT clutch, injectors, tune..... for $500

[shaoyang951]

If the engine itself is still in good and running condition I am very interested!!! Lemme know if youll part the engine itself please, thanks. GLWS.

[Otherworldview]

Engine itself was in good running condition before it was torn down. Cylinder walls are smooth with no score marks or anything.

[SoloSilvia]

Why was it Torn down?

[Otherworldview]

Wanted to take a stab at building an engine for high then stock horse power. Got it all torn down and bought most of the parts, then got bored, distracted, didn't care any more, ADD...
There's honestly no hidden surprises here, engine ran stock before I took it apart. I just tend to get distracted easily by something else and whatever I was just doing just sits. Now I'm just trying to find the setup a good home so someone else can finish it up and enjoy it.

[prodigyJJ]

sweet deal! If I wanted an SR swap, this would be the one I'd want. I can't believe this hasn't sold yet!

[spartanmisfit]

Ahhh I wish u would have waited untill this summer

[supramon808]

how much for nissan oem gasket kit..
cp piston
acl bearings...how much..lmk

[Otherworldview]

Originally Posted by supramon808

how much for nissan oem gasket kit..
cp piston
acl bearings...how much..lmk

Supramon808,
I'm not parting out the setup.

[gots13?]

man if u were in socal all be all over this.

[drifter_for_life06]

where in MD are you located, im just over the Mason Dixon line.....PM me

[chjohn12]

I could do 2k shipped to 54880.. let me know please and thanks.

[swatcash]

how much for the ecu shipped to 47201... please and thnx

[gots13?]

how much shipped to 91107

[libtech240sx]

where in MD are you i could possibly just make the trip to pick it up and you state that the ecu is tuned for the 264 cams but do you have them?

[Otherworldview]

Originally Posted by drifter_for_life06

where in MD are you located, im just over the Mason Dixon line.....PM me

I'm at Fort Meade, just south of Baltimore.

Originally Posted by chjohn12

I could do 2k shipped to 54880.. let me know please and thanks.

How about $2100?

Originally Posted by gots13?

how much shipped to 91107

Quick guess through UPS would be $200. So $2200 total

Originally Posted by swatcash

how much for the ecu shipped to 47201... please and thnx

This isn't just about my posting, but all postings... do most people not read the entire whole post, or do they just look for what they want and not bother? I'm not parting it out.

Originally Posted by libtech240sx

where in MD are you i could possibly just make the trip to pick it up and you state that the ecu is tuned for the 264 cams but do you have them?

I'm over at Fort Meade, just south of Baltimore.
Correct, the ECU is tuned for the 264 cams, I just have yet to get them (so you'll need to get them)

[Otherworldview]

Sold!

Please close.