SRDET Coil cover !!!!?!?!? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

OutlawLui · 04-02-2012, 11:38 AM

Does anyone know the Dimensions for The sr20det CoilCover??

I work in a shop, and i can custom make pretty much anything

Since i'm missing the coil cover i'm going to make a custom one

If anyone could help me i would appreciate it, i can also make you guys
a custom one after i make mine and take pics if wanted, thanks

who ever helps me first gets a free sticker of you choice nikkas

harris180 · 04-02-2012, 11:46 AM

i'll bite..

are you after the dimensions of the s13 coil pack cover, or the s14/s15 one?? if you dont know, does the back of your rocker cover slope down, or is it dead flat?? if its dead flat i can measure mine tomorrow, will post up a little pic with all the dimensions..

OutlawLui · 04-02-2012, 11:58 AM

thanks,The one i need is the Flat one from the s13 redtop sr20det

gretz · 04-02-2012, 12:02 PM

Quote:

Originally Posted by evilpanamajack

Does anyone know the Dimensions for The sr20det CoilCover??

I work in a shop, and i can custom make pretty much anything

Since i'm missing the coil cover i'm going to make a custom one

If anyone could help me i would appreciate it, i can also make you guys
a custom one after i make mine and take pics if wanted, thanks

who ever helps me first gets a free sticker of you choice nikkas

I machined a few 1-off coilpack covers, for what people want to pay, its not worth it... You are going to start off with a 1/2" thick, 3" wide, 16" pc of aluminum, machine a fixture, machine the plate to bolt to said fixture, machine coilpack profile / design, machine the bottom to make bosses for height clearance... I did a few "promotionals", not really worth it IMO...

Have you made one before, or are you OMG I HAZ CNC ACCESS I CAN MAKES ANYTHING ?

OutlawLui · 04-02-2012, 12:33 PM

Quote:

Originally Posted by gretz

I machined a few 1-off coilpack covers, for what people want to pay, its not worth it... You are going to start off with a 1/2" thick, 3" wide, 16" pc of aluminum, machine a fixture, machine the plate to bolt to said fixture, machine coilpack profile / design, machine the bottom to make bosses for height clearance... I did a few "promotionals", not really worth it IMO...

Have you made one before, or are you OMG I HAZ CNC ACCESS I CAN MAKES ANYTHING ?

Ill try that, i have made custom parts before, but never a coil cover, and no i'm not "OMG I HAZ CNC ACCESS I CAN MAKES ANYTHING ?" wtf lol

04-02-2012, 11:38 AM	#1
OutlawLui Zilvia FREAK! Join Date: Apr 2011 Location: Anaheim CA Age: 38 Posts: 1,491 Trader Rating: (19) Feedback Score: 19 reviews	SRDET Coil cover !!!!?!?!? Does anyone know the Dimensions for The sr20det CoilCover?? I work in a shop, and i can custom make pretty much anything Since i'm missing the coil cover i'm going to make a custom one If anyone could help me i would appreciate it, i can also make you guys a custom one after i make mine and take pics if wanted, thanks who ever helps me first gets a free sticker of you choice nikkas __________________ .

04-02-2012, 11:58 AM	#3
OutlawLui Zilvia FREAK! Join Date: Apr 2011 Location: Anaheim CA Age: 38 Posts: 1,491 Trader Rating: (19) Feedback Score: 19 reviews	thanks,The one i need is the Flat one from the s13 redtop sr20det __________________ .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-02-2012, 11:46 AM	#2
harris180 Zilvia Member Join Date: Mar 2011 Location: Townsville, Australia Age: 37 Posts: 265 Trader Rating: (0) Feedback Score: 0 reviews	i'll bite.. are you after the dimensions of the s13 coil pack cover, or the s14/s15 one?? if you dont know, does the back of your rocker cover slope down, or is it dead flat?? if its dead flat i can measure mine tomorrow, will post up a little pic with all the dimensions..