Traction for launching. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Gladman · 05-24-2004, 05:26 PM

Im pissed off at my car right now, it launches worse than my FWD prelude.

Im running GAB 8 way adjustables, quite stiff right now, ES100tires and VLSD.

Ill try a 3000rpm launch, ill let out the clutch slow enough to avoid breaking the tires loose, but fast enough to not burn it. After it engages and i gas it, the tires hop like crazy.

Anyway to solve this? Is there any kind of a bracket i can weld up to stiffen the rear control arms? Less air in the tires, more air? Engine mounts etc?

What kinda times should i be pulling in the 60ft? 2500lbs, ES100's, KA-T?

kingsol · 05-24-2004, 05:36 PM

lower your tire pressure and soften the rear

mike13 · 05-24-2004, 05:51 PM

subframe spacers are a huge help for wheel hop

TokyoNights · 05-24-2004, 06:05 PM

Quote:

Originally Posted by mike13

subframe spacers are a huge help for wheel hop

Yes, they made a huge difference in my car,,including noise

Gladman · 05-24-2004, 06:48 PM

Where can i order them?

Nissan2nr · 05-24-2004, 07:02 PM

LS Auto Sells a set for like 125.00 including shipping. I heard it's worth it, when I go Sr I will definatly invest in some of these: http://lsauto.com/products.asp

TokyoNights · 05-24-2004, 07:14 PM

http://www.technotoytuning.com
79 bux. good quality

mike13 · 05-24-2004, 08:15 PM

splparts.com

and there was no increase in road noise when i installed mine

twitchy · 05-25-2004, 12:44 AM

i dont get subframe spaces....can anyone show me a pic of where they go?

**ThatGuy** · 05-25-2004, 12:48 AM

Here.

Your Welcome.

Nismo240SX · 05-25-2004, 11:08 AM

how long does installation take?

nismo skyline · 05-25-2004, 11:16 AM

Quote:

Originally Posted by Nismo240SX

how long does installation take?

30 mins, not too long. just jack up the rear and start unbolting where the subframe spacer should go.

celerrime · 05-25-2004, 04:22 PM

What exactly do they do? Replace the worn out bushings with a stiffer material? I am just trying to get the concept behind them.

TokyoNights · 05-25-2004, 04:37 PM

They sandwitch your stock bushings.^

drunklowlife · 05-25-2004, 07:27 PM

get some slicks or drag radials. i cut a 1.791 60ft on 22x8x15 mickey thompson et drags.

05-24-2004, 05:26 PM	#1
Gladman Zilvia Member Join Date: Feb 2004 Location: Vancouver Age: 39 Posts: 287 Trader Rating: (0) Feedback Score: 0 reviews	Traction for launching. Im pissed off at my car right now, it launches worse than my FWD prelude. Im running GAB 8 way adjustables, quite stiff right now, ES100tires and VLSD. Ill try a 3000rpm launch, ill let out the clutch slow enough to avoid breaking the tires loose, but fast enough to not burn it. After it engages and i gas it, the tires hop like crazy. Anyway to solve this? Is there any kind of a bracket i can weld up to stiffen the rear control arms? Less air in the tires, more air? Engine mounts etc? What kinda times should i be pulling in the 60ft? 2500lbs, ES100's, KA-T? __________________ Kick Ass 2.4Liter Engine!

05-24-2004, 05:51 PM	#3
mike13 Zilvia Addict Join Date: Sep 2003 Location: Pittsburgh Age: 42 Posts: 691 Trader Rating: (0) Feedback Score: 0 reviews	subframe spacers are a huge help for wheel hop __________________

05-24-2004, 06:48 PM	#5
Gladman Zilvia Member Join Date: Feb 2004 Location: Vancouver Age: 39 Posts: 287 Trader Rating: (0) Feedback Score: 0 reviews	Where can i order them? __________________ Kick Ass 2.4Liter Engine!

05-24-2004, 08:15 PM	#8
mike13 Zilvia Addict Join Date: Sep 2003 Location: Pittsburgh Age: 42 Posts: 691 Trader Rating: (0) Feedback Score: 0 reviews	splparts.com and there was no increase in road noise when i installed mine __________________

05-25-2004, 12:44 AM	#9
twitchy Zilvia FREAK! Join Date: Apr 2003 Location: Ontario Posts: 1,579 Trader Rating: (0) Feedback Score: 0 reviews	i dont get subframe spaces....can anyone show me a pic of where they go? __________________ Who the hell needs a sig anyhow

05-24-2004, 05:36 PM	#2
kingsol Zilvia FREAK! Join Date: Jun 2003 Location: Berkeley/San Francisco Posts: 1,435 Trader Rating: (0) Feedback Score: 0 reviews	lower your tire pressure and soften the rear

05-24-2004, 07:02 PM	#6
Nissan2nr Join Date: Apr 2004 Location: 91 Nissan 240 Sx Hatchback Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	LS Auto Sells a set for like 125.00 including shipping. I heard it's worth it, when I go Sr I will definatly invest in some of these: http://lsauto.com/products.asp

05-24-2004, 07:14 PM	#7
TokyoNights Zilvia FREAK! Join Date: Dec 2002 Location: garage Age: 42 Posts: 1,215 Trader Rating: (2) Rides Gallery: TokyoNights Feedback Score: 2 reviews	http://www.technotoytuning.com 79 bux. good quality

05-25-2004, 12:48 AM	#10
ThatGuy Admin Asshole Join Date: Mar 2002 Location: Retired Age: 45 Posts: 20,394 Trader Rating: (0) Rides Gallery: ThatGuy Feedback Score: 0 reviews	Here. Your Welcome. __________________ "Speak softly,..." -Pres. Teddy Roosevelt "Be polite, be professional, ..." -Gen. James Mattis

05-25-2004, 11:08 AM	#11
Nismo240SX Zilvia Addict Join Date: Sep 2001 Location: Marion, Virginia. Age: 39 Posts: 855 Trader Rating: (0) Feedback Score: 0 reviews	how long does installation take? __________________ 1990 Nissan 240sx:s13 blacktop, s13.5 front

05-25-2004, 04:22 PM	#13
celerrime Join Date: Mar 2004 Location: Iowa Posts: 29 Trader Rating: (0) Feedback Score: 0 reviews	What exactly do they do? Replace the worn out bushings with a stiffer material? I am just trying to get the concept behind them.

05-25-2004, 04:37 PM	#14
TokyoNights Zilvia FREAK! Join Date: Dec 2002 Location: garage Age: 42 Posts: 1,215 Trader Rating: (2) Rides Gallery: TokyoNights Feedback Score: 2 reviews	They sandwitch your stock bushings.^

05-25-2004, 07:27 PM	#15
drunklowlife Leaky Injector Join Date: Nov 2003 Location: louisville Age: 41 Posts: 107 Trader Rating: (0) Feedback Score: 0 reviews	get some slicks or drag radials. i cut a 1.791 60ft on 22x8x15 mickey thompson et drags. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode