Turn signals not working. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Brolewigi · 10-21-2004, 01:25 PM

I have had this problem since I've gotten my car. When I bought the 91' S13; the engine had a cracked head and blown head gasket. Well, I didn't even drive it before I put the SR20 in it. Now the turn signals are not working. I have replaced all of the bulbs and checked them and they are fine. Could it be a electrical issue? Would the wiring in the sr20 have any thing to do with it? The passanger side markers and turns signals stay on, (solid) but sometimes they come on and off. Oh and I have checked all of the fuses, I'm not that dumb.

Blues13 · 10-22-2004, 01:50 AM

Check the hazard button and wiring.. see if it's damaged, stuck, or jammed.. That would cause the blinkers to stop working.

10-21-2004, 01:25 PM	#1
Brolewigi Zilvia Member Join Date: Dec 2003 Location: Michigan Age: 40 Posts: 152 Trader Rating: (0) Feedback Score: 0 reviews	Turn signals not working. I have had this problem since I've gotten my car. When I bought the 91' S13; the engine had a cracked head and blown head gasket. Well, I didn't even drive it before I put the SR20 in it. Now the turn signals are not working. I have replaced all of the bulbs and checked them and they are fine. Could it be a electrical issue? Would the wiring in the sr20 have any thing to do with it? The passanger side markers and turns signals stay on, (solid) but sometimes they come on and off. Oh and I have checked all of the fuses, I'm not that dumb. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-22-2004, 01:50 AM	#2
Blues13 Zilvia Junkie Join Date: Jul 2003 Location: OC Posts: 435 Trader Rating: (2) Feedback Score: 2 reviews	Check the hazard button and wiring.. see if it's damaged, stuck, or jammed.. That would cause the blinkers to stop working.