Rear Oil Sump modification - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

synco357 · 02-10-2016, 02:42 PM

Hello members,
I'm doing a S14, SR20 swap in my FD Rx7 and need some help.
looking to purchase a rear sump oil pan, oil pick up tube and dip stick.

Hoping someone can help, thanks.

Andre

jr_ss · 02-10-2016, 04:10 PM

There isn't a "rear" sump oil pan. There is a RWD and a FWD oil pan.

synco357 · 02-10-2016, 04:36 PM

Quote:

Originally Posted by jr_ss

There isn't a "rear" sump oil pan. There is a RWD and a FWD oil pan.

Thanks for the quick response. Yes, I'm aware of the two oil pan variations. However, I'm aware that some people doing RWD engine swaps have also modified the oil pan to eliminate cutting up the power plant frame/cradle.

jedi03 · 02-10-2016, 07:27 PM

I have one in my rx7...I cut the pickup tube and extended it keeping it close to the girdle then dropped it down I thin about 2 inches where stock pickup is...cut the upper oil pan and welded a box shape for the entire pan and put drain in the side...I don't recommend using an aluminum bung as I think mine may have stripped out already but explore options!

jr_ss · 02-11-2016, 10:28 AM

Quote:

Originally Posted by synco357

Thanks for the quick response. Yes, I'm aware of the two oil pan variations. However, I'm aware that some people doing RWD engine swaps have also modified the oil pan to eliminate cutting up the power plant frame/cradle.

My point being, you'll have to have one fabricated...

jedi03 · 02-14-2016, 07:29 PM

Set your engine height and placement first then do the oil pan...I think that's how we did mine...I'm surprised no one has hopped on making these yet...

02-10-2016, 02:42 PM	#1
synco357 Join Date: Feb 2016 Location: Florida Posts: 43 Trader Rating: (0) Feedback Score: 0 reviews	Rear Oil Sump modification Hello members, I'm doing a S14, SR20 swap in my FD Rx7 and need some help. looking to purchase a rear sump oil pan, oil pick up tube and dip stick. Hoping someone can help, thanks. Andre

02-10-2016, 04:10 PM	#2
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,415 Trader Rating: (35) Feedback Score: 35 reviews	There isn't a "rear" sump oil pan. There is a RWD and a FWD oil pan. __________________ My SR20VET Does your VTC gear rattle in your S14/15 SR? PM me.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-10-2016, 07:27 PM	#4
jedi03 Nissanaholic! Join Date: Jul 2008 Location: albuquerque Posts: 1,842 Trader Rating: (8) Feedback Score: 8 reviews	I have one in my rx7...I cut the pickup tube and extended it keeping it close to the girdle then dropped it down I thin about 2 inches where stock pickup is...cut the upper oil pan and welded a box shape for the entire pan and put drain in the side...I don't recommend using an aluminum bung as I think mine may have stripped out already but explore options!

02-14-2016, 07:29 PM	#6
jedi03 Nissanaholic! Join Date: Jul 2008 Location: albuquerque Posts: 1,842 Trader Rating: (8) Feedback Score: 8 reviews	Set your engine height and placement first then do the oil pan...I think that's how we did mine...I'm surprised no one has hopped on making these yet...