ST Sway bar hardware?

[NismoDan]

I recently picked up a set of the Suspension Technique sway bars for my S13, but I got it really cheap so it's JUST the bars...like, just the metal things.
I don't have any of the bushings or brackets or anything, and I doubt that the stock ones will fit over the new bars (besides the fact that theyre probably way old and cracking, and the ST ones are poly-eurethane).

Does anyone know where I can buy just the mounting hardware (and instructions would help too ).

Thanks!!

[stillmatic]

I got a brand new rear sway bar hardware kit. It's missing 1 U bracket but I will include a stock one cut in half to accomodate the missing piece. I'm asking $25.

[projectRDM]

ST sells all the hardware separately. Contact a dealer or call them directly. Or, if you know anyone else who has a set, they include a parts list with the instructions.

[Mark95TT(ATL)]

Originally Posted by R240NA

ST sells all the hardware separately. Contact a dealer or call them directly. Or, if you know anyone else who has a set, they include a parts list with the instructions.

Here are the ST part numbers, quantities, descriptions you need --

rear bar endlinks:
2 x 113200 pivot bushing
8 x 113000 end link grommet
2 x 114020 bushing bracket
2 x 110255 3/8"-16 nylon lock nut
2 x 112410 1-3/4" spacer tube
8 x 112502 cupped washer
2 x 112130 3/8"-16 x 5.5" HHCS

front bar endlinks:
2 x 110255 3/8"-16 nylon lock nut
2 x 112130 3/8"-16 x 5.5" HHCS
8 x 112502 cupped washer
8 x 113000 end link grommet
2 x 112406 spacer tube
2 x 113175 pivot bushing
2 x 114020 bushing bracket
8 x 112518 flat washer
2 x 112018 10mm-1.25 x 30mm HHCS
4 x 110625 flat washer 3/8"


These are for the S14, S13 may be slightly different.

[S14DB]

you can get ES stuff at your local autoparts store.

[kuruptR]

Originally Posted by NismoDan

I recently picked up a set of the Suspension Technique sway bars for my S13, but I got it really cheap so it's JUST the bars...like, just the metal things.
I don't have any of the bushings or brackets or anything, and I doubt that the stock ones will fit over the new bars (besides the fact that theyre probably way old and cracking, and the ST ones are poly-eurethane).

Does anyone know where I can buy just the mounting hardware (and instructions would help too ).

Thanks!!

here are the part numbers for for the hardware kit:

front:50090-777
rear:51065-777

[NismoDan]

Thanks to everyone for helping me out, especially kuruptR.
The only thing now is, where should i go with these parts numbers to order the parts?
The ST website is shut down, I think, and I dont know who carries their stuff.

Thanks again!

[Mark95TT(ATL)]

Call ST directly, they can help you out.

Suspension Techniques
(800) 595-7016