Nismo part ? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Project D · 07-01-2005, 05:31 PM

I was looking at the Nismo parts for the SR20DET (motor mounts, SS lines, etc...) and I ran across something called the solid pivot for the drivetrain. What exactly does it do? I have no idea what it woul be used for, but any insight at this point in time is appreciated.

P.S. I already searched, found something on some pivoting device but it was for cams, this isn't for cams.

Thanks in advance.

**mrmephistopheles** · 07-01-2005, 06:34 PM

It's the pivot that the clutch fork attaches to. Meant for use with high-strength clutches so you don't break the factory pivot.

speeddreamz · 07-02-2005, 12:05 AM

Yep i've broken mine before....how? I don't know I wasn't doing any crazy driving , i Probably installed it wrong.

Project D · 07-02-2005, 09:53 AM

So this part is not a necessary one for a car pushing around 265 HP? For the money, seemed like a nice insurance policy. Also, will this part be OK to use with a stage 1 exedy clutch? Seems like it might be overkill, but if it is stronger, it may be worth it.

Project D · 07-02-2005, 02:28 PM

Bump. Lookinf for an answer to this. If it's too harsh of a part, don't want to use it on an almost stock drivetrain setup.

Project D · 07-03-2005, 09:32 AM

Last chance bump time here.

RedtopTech · 02-04-2006, 09:15 PM

Bump bitches

**mrmephistopheles** · 02-05-2006, 06:28 AM

http://www.courtesyparts.com/Merchan...de=30537-CLTPV

fucking amazing what 15 seconds and google can produce.

07-01-2005, 05:31 PM	#1
Project D Zilvia Member Join Date: May 2005 Location: Grand Junction, CO Age: 40 Posts: 179 Trader Rating: (0) Feedback Score: 0 reviews	Nismo part ? I was looking at the Nismo parts for the SR20DET (motor mounts, SS lines, etc...) and I ran across something called the solid pivot for the drivetrain. What exactly does it do? I have no idea what it woul be used for, but any insight at this point in time is appreciated. P.S. I already searched, found something on some pivoting device but it was for cams, this isn't for cams. Thanks in advance.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-02-2005, 12:05 AM	#3
speeddreamz Zilvia FREAK! Join Date: Jan 2003 Location: San Francisco, California Age: 40 Posts: 1,015 Trader Rating: (0) Feedback Score: 0 reviews	Yep i've broken mine before....how? I don't know I wasn't doing any crazy driving , i Probably installed it wrong.

07-02-2005, 09:53 AM	#4
Project D Zilvia Member Join Date: May 2005 Location: Grand Junction, CO Age: 40 Posts: 179 Trader Rating: (0) Feedback Score: 0 reviews	So this part is not a necessary one for a car pushing around 265 HP? For the money, seemed like a nice insurance policy. Also, will this part be OK to use with a stage 1 exedy clutch? Seems like it might be overkill, but if it is stronger, it may be worth it.

07-02-2005, 02:28 PM	#5
Project D Zilvia Member Join Date: May 2005 Location: Grand Junction, CO Age: 40 Posts: 179 Trader Rating: (0) Feedback Score: 0 reviews	Bump. Lookinf for an answer to this. If it's too harsh of a part, don't want to use it on an almost stock drivetrain setup.

07-03-2005, 09:32 AM	#6
Project D Zilvia Member Join Date: May 2005 Location: Grand Junction, CO Age: 40 Posts: 179 Trader Rating: (0) Feedback Score: 0 reviews	Last chance bump time here.

02-04-2006, 09:15 PM	#7
RedtopTech Zilvia Member Join Date: Dec 2005 Location: Virginia Beach, VA Age: 40 Posts: 293 Trader Rating: (0) Feedback Score: 0 reviews	Bump bitches