What is making the rear of my car creak? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

evanl85 · 07-12-2005, 11:31 AM

What parts could do this besides the shocks? My rear drivers side creaks at low speeds, and if I push down on the back of the car when I'm stopped. It isn't the shock (replaced less than 10k ago). What other parts do this, bushings maybe? Or is the car just old. Anyway if you have had this problem any input would be appreciated, Thanks.

projectRDM · 07-12-2005, 01:02 PM

Aarm bushings, upright bushings, subframe bushings.

TheSparo · 07-12-2005, 01:09 PM

mine made the same noise, turned out it was the RUCA i had replaced them and somehow got a little dry in there (bushing where it bolts up) and ijust took it off and greased it up, problem solved, at least mine

evanl85 · 07-12-2005, 01:11 PM

Is there any way to tell which bushing it might be, or do I need to get it on a lift and just look?

TheSparo · 07-12-2005, 03:12 PM

it's just the one on the RUCA, you have to take off the wheel, and i unbolted it, not sure if i had to though, then grease it up and put it all back

07-12-2005, 11:31 AM	#1
evanl85 Zilvia Member Join Date: Jul 2004 Location: Va Posts: 182 Trader Rating: (0) Feedback Score: 0 reviews	What is making the rear of my car creak? What parts could do this besides the shocks? My rear drivers side creaks at low speeds, and if I push down on the back of the car when I'm stopped. It isn't the shock (replaced less than 10k ago). What other parts do this, bushings maybe? Or is the car just old. Anyway if you have had this problem any input would be appreciated, Thanks. Last edited by evanl85; 07-12-2005 at 11:56 AM..

07-12-2005, 01:02 PM	#2
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Aarm bushings, upright bushings, subframe bushings. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

07-12-2005, 01:09 PM	#3
TheSparo Zilvia FREAK! Join Date: Sep 2002 Location: Athens/Chattanooga/ Cookeville/Morristown, TN Age: 39 Posts: 1,141 Trader Rating: (0) Feedback Score: 0 reviews	mine made the same noise, turned out it was the RUCA i had replaced them and somehow got a little dry in there (bushing where it bolts up) and ijust took it off and greased it up, problem solved, at least mine __________________ 89 240 SR powered... ummm i promise its stock

07-12-2005, 03:12 PM	#5
TheSparo Zilvia FREAK! Join Date: Sep 2002 Location: Athens/Chattanooga/ Cookeville/Morristown, TN Age: 39 Posts: 1,141 Trader Rating: (0) Feedback Score: 0 reviews	it's just the one on the RUCA, you have to take off the wheel, and i unbolted it, not sure if i had to though, then grease it up and put it all back __________________ 89 240 SR powered... ummm i promise its stock

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-12-2005, 01:11 PM	#4
evanl85 Zilvia Member Join Date: Jul 2004 Location: Va Posts: 182 Trader Rating: (0) Feedback Score: 0 reviews	Is there any way to tell which bushing it might be, or do I need to get it on a lift and just look?