best way to clean engine compartment - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

tzonni · 08-28-2002, 02:20 PM

<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'> any suggestions?

kanekz · 08-28-2002, 04:33 PM

Two words: Simple Green. I have used it on my engine bay before.

Go get a bottle of Simple Green All Purpise cleaner and spray it down on your engine bay. Make sure your engine is not hot. Let it cool off before doing this. After spraying down the dirty parts, let it set for a while. Brush the really dirty parts if needed with a toothbrush or something. After this, hose down the engine bat with a high pressure water hose (or you regular hose with ur thumb on the end). I HIGHLY RECOMMEND taking out the spark plugs and covering up the spark plug chamber so water does not get into them. ITs a PAIN if this happends. Trust me.

EDIT: AH yes, cover up the distributor cap as well, make sure it doesnt get wet.

negular · 08-28-2002, 04:39 PM

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">After this, hose down the engine bat with a high pressure water hose (or you regular hose with ur thumb on the end).</td></tr></table><span id='postcolor'>

i've seen my friend spray his engine bay down at the pressure wash... he told me to do the same to my Z once, but i was to scared i'd fuck something up.

hokiewalrus · 08-28-2002, 06:04 PM

I've used Simple Green before with great results!

I'm a little too squeemish to take a hose to my engine, but I was able to clean it up with a clean sponge and a bucket of water...

S13Grl · 08-28-2002, 07:11 PM

You have to cover EVERYTHING electrical, not just the distributor and the spark plug wires. You have to make sure that your filter (if you have a cone) doesn't get wet. Make sure your MAF is covered, all your sensors are covered, make sure that your fuel rail is covered, make sure that your belts don't get too wet either b/c they'll start squealing and can possibly get out of adjustment, providing you get them wet enough.

08-28-2002, 04:33 PM	#2
kanekz Zilvia Addict Join Date: May 2002 Location: California Posts: 802 Trader Rating: (0) Feedback Score: 0 reviews	Two words: Simple Green. I have used it on my engine bay before. Go get a bottle of Simple Green All Purpise cleaner and spray it down on your engine bay. Make sure your engine is not hot. Let it cool off before doing this. After spraying down the dirty parts, let it set for a while. Brush the really dirty parts if needed with a toothbrush or something. After this, hose down the engine bat with a high pressure water hose (or you regular hose with ur thumb on the end). I HIGHLY RECOMMEND taking out the spark plugs and covering up the spark plug chamber so water does not get into them. ITs a PAIN if this happends. Trust me. EDIT: AH yes, cover up the distributor cap as well, make sure it doesnt get wet. __________________ Blitz!!

08-28-2002, 04:39 PM	#3
negular Dr. Neg Join Date: Nov 2001 Location: Platt, NY Age: 41 Posts: 571 Trader Rating: (0) Feedback Score: 0 reviews	</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">After this, hose down the engine bat with a high pressure water hose (or you regular hose with ur thumb on the end).</td></tr></table><span id='postcolor'> i've seen my friend spray his engine bay down at the pressure wash... he told me to do the same to my Z once, but i was to scared i'd fuck something up. __________________ The louder the radio, the better I sing.

08-28-2002, 02:20 PM	#1
tzonni Join Date: May 2002 Posts: 27 Trader Rating: (0) Feedback Score: 0 reviews	<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'> any suggestions?

08-28-2002, 06:04 PM	#4
hokiewalrus Join Date: Jul 2002 Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	I've used Simple Green before with great results! I'm a little too squeemish to take a hose to my engine, but I was able to clean it up with a clean sponge and a bucket of water...

08-28-2002, 07:11 PM	#5
S13Grl Married to the Mob Join Date: Dec 2000 Age: 44 Posts: 3,670 Trader Rating: (0) Feedback Score: 0 reviews	You have to cover EVERYTHING electrical, not just the distributor and the spark plug wires. You have to make sure that your filter (if you have a cone) doesn't get wet. Make sure your MAF is covered, all your sensors are covered, make sure that your fuel rail is covered, make sure that your belts don't get too wet either b/c they'll start squealing and can possibly get out of adjustment, providing you get them wet enough.