HELP!! Throwout Bearing - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SR201AB · 11-19-2007, 09:21 PM

I have a redtop SR20DET with a 5-speed transmission, and when trying to press the old throwout bearing off, the carrier that the throwout bearing is pressed onto broke. I believe it is a cast iron piece but im not sure. Does anyone know where I can get one? or if one off something else will work? Help is much appreciated in advance.

Thanks,
Nate

JDMwannaBE · 11-19-2007, 09:22 PM

jeez, man thats gonna be a crazy part to come by. sorry, i have no clue.

unicoladron · 11-19-2007, 09:28 PM

this may help:

http://www.zilvia.net/f/showthread.php?t=98541

this is a long shot, but does anyone know if the KA uses the same tob carrier as the SR? or perhaps even the usdm 300zx?

*fliprayzin240sx* · 11-19-2007, 10:31 PM

KA carrier and use a Z32 TOB...

LimitedEdition · 11-19-2007, 10:33 PM

i was going to say, i would think a KA has the same one as a sr.

i always use 300zx TOB's anyways.

mestizo · 11-19-2007, 10:38 PM

I used an SR tob carrier on my KA 5 speed swap, it works fine.

*downshift_sideways* · 11-19-2007, 10:41 PM

Are you talking about the pivot fork?

( where the throwout bearing is pressed into? )

If so. I have one.

Just to help you out. Pay shipping, and I'll send it via UPS. ASAP.

ladiesman8527 · 11-20-2007, 07:21 AM

He needs the part ive circled in red in the picture above. its cracked all to hell. he needs one preferably from an SR20 tranny, but if you guys are saying a KA carrier and a Z32 TOB will work, we'll give it a try. thanks a lot!

PS: im assuming we can still use the SR pivot fork and clips in conjuction with the KA carrier and Z32 TOB right?

Vernal · 11-20-2007, 07:27 AM

I heard that the ka and sr trannys are pretty much the same except the bell housing.

koukimonster139 · 11-20-2007, 07:29 AM

i heard that if you jump off a 100' tall bridge and into a river you wont die

*downshift_sideways* · 11-20-2007, 10:45 AM

Quote:

Originally Posted by Vernal

I heard that the ka and sr trannys are pretty much the same except the bell housing.

It also depends on what type of clutch you have. they make them smaller or bigger on the Throwout bearing.

I would say:
Go to Napa Auto parts. ( if there is one around you )
Get a KA throwout bearing (35$) it comes with the release sleeve to.

See if that matches. I'm pretty sure it will.

SR201AB · 11-20-2007, 02:48 PM

Alright I guess ill try the ka carrier with a Z32 throwout bearing, thanks for all the help, I appreciate it!

opponheimer · 11-20-2007, 04:47 PM

i have like 2 brand new tobs u wanna buy one?

BattleRoyale · 11-21-2007, 12:28 AM

i had the same thing happen to mine, i just used the ka one it was less worn then the sr one no problems what so ever

SR201AB · 11-21-2007, 01:15 AM

i wish i would have read this earlier, i just went to nissan and got one today, thanks tho

*fliprayzin240sx* · 11-21-2007, 07:59 AM

I still cant believe they cracked a fucking carrier...in all honesty, stay the fuck away from that shop from now on. If thats not a sign of stupidity, i dont know what is.

SILVIA_KIDs14.5 · 11-21-2007, 08:31 AM

Quote:

Originally Posted by SR201AB

I have a redtop SR20DET with a 5-speed transmission, and when trying to press the old throwout bearing off, the carrier that the throwout bearing is pressed onto broke. I believe it is a cast iron piece but im not sure. Does anyone know where I can get one? or if one off something else will work? Help is much appreciated in advance.

Thanks,
Nate

jus use the ka its the same or a get a 300zx same as well all have the same shaft size and number of splines i'm in the process of retrofiting a 300zx tt tranny in the the 240 with my sr

unicoladron · 11-21-2007, 08:53 AM

^--lol, the thread is over, he already picked one up from nissan

11-19-2007, 09:21 PM	#1
SR201AB Join Date: Jun 2007 Location: memphis Age: 37 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	HELP!! Throwout Bearing I have a redtop SR20DET with a 5-speed transmission, and when trying to press the old throwout bearing off, the carrier that the throwout bearing is pressed onto broke. I believe it is a cast iron piece but im not sure. Does anyone know where I can get one? or if one off something else will work? Help is much appreciated in advance. Thanks, Nate

11-19-2007, 09:22 PM	#2
JDMwannaBE Zilvia Junkie Join Date: Jan 2007 Location: kentucky Age: 40 Posts: 330 Trader Rating: (0) Feedback Score: 0 reviews	jeez, man thats gonna be a crazy part to come by. sorry, i have no clue. __________________

11-19-2007, 09:28 PM	#3
unicoladron Zilvia Junkie Join Date: Jul 2007 Location: Long Island, NY Age: 40 Posts: 568 Trader Rating: (0) Feedback Score: 0 reviews	this may help: http://www.zilvia.net/f/showthread.php?t=98541 this is a long shot, but does anyone know if the KA uses the same tob carrier as the SR? or perhaps even the usdm 300zx? __________________ 1993 KA24DE for sale with 180k..running when pulled.... need to get rid of ASAP...i'm moving

11-19-2007, 10:31 PM	#4
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	KA carrier and use a Z32 TOB... __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

11-19-2007, 10:38 PM	#6
mestizo Zilvia Junkie Join Date: Nov 2006 Location: Sacramento California Posts: 360 Trader Rating: (8) Feedback Score: 8 reviews	I used an SR tob carrier on my KA 5 speed swap, it works fine. __________________ 92 S13 Coupe Track Car

11-19-2007, 10:33 PM	#5
LimitedEdition BANNED Join Date: Sep 2007 Location: MD Age: 39 Posts: 353 Trader Rating: (0) Feedback Score: 0 reviews	i was going to say, i would think a KA has the same one as a sr. i always use 300zx TOB's anyways.

11-19-2007, 10:41 PM	#7
downshift_sideways No Limit Soldier. Join Date: Jan 2006 Location: Hayward CA, San Gabriel CA Age: 38 Posts: 5,550 Trader Rating: (0) Rides Gallery: downshift_sideways Feedback Score: 0 reviews	Are you talking about the pivot fork? ( where the throwout bearing is pressed into? ) If so. I have one. Just to help you out. Pay shipping, and I'll send it via UPS. ASAP. __________________ allntrlundrgrnd: "you never really appreciate your parents fridge until you look into your own and its full of condiments only"

11-20-2007, 07:21 AM	#8
ladiesman8527 Zilvia Junkie Join Date: Dec 2005 Location: Collierville, TN Age: 38 Posts: 429 Trader Rating: (0) Feedback Score: 0 reviews	He needs the part ive circled in red in the picture above. its cracked all to hell. he needs one preferably from an SR20 tranny, but if you guys are saying a KA carrier and a Z32 TOB will work, we'll give it a try. thanks a lot! PS: im assuming we can still use the SR pivot fork and clips in conjuction with the KA carrier and Z32 TOB right?

11-20-2007, 07:27 AM	#9
Vernal Zilvia Junkie Join Date: Aug 2006 Location: Burbank, CA Posts: 517 Trader Rating: (0) Feedback Score: 0 reviews	I heard that the ka and sr trannys are pretty much the same except the bell housing.

11-20-2007, 07:29 AM	#10
koukimonster139 Zilvia FREAK! Join Date: Jan 2006 Location: Birmingham, AL Age: 38 Posts: 1,379 Trader Rating: (0) Feedback Score: 0 reviews	i heard that if you jump off a 100' tall bridge and into a river you wont die __________________ ho ha ho chi chi

11-20-2007, 02:48 PM	#12
SR201AB Join Date: Jun 2007 Location: memphis Age: 37 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	Alright I guess ill try the ka carrier with a Z32 throwout bearing, thanks for all the help, I appreciate it!

11-20-2007, 04:47 PM	#13
opponheimer Zilvia FREAK! Join Date: Apr 2007 Location: Bikini Atoll Posts: 1,267 Trader Rating: (3) Feedback Score: 3 reviews	i have like 2 brand new tobs u wanna buy one? __________________ SR20 & RB20/25/26 in s13/s14 Wiring from $125 to $200.. Best prices EVER.

11-21-2007, 12:28 AM	#14
BattleRoyale Leaky Injector Join Date: Sep 2005 Location: moon Posts: 83 Trader Rating: (0) Feedback Score: 0 reviews	i had the same thing happen to mine, i just used the ka one it was less worn then the sr one no problems what so ever

11-21-2007, 01:15 AM	#15
SR201AB Join Date: Jun 2007 Location: memphis Age: 37 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	i wish i would have read this earlier, i just went to nissan and got one today, thanks tho

11-21-2007, 07:59 AM	#16
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	I still cant believe they cracked a fucking carrier...in all honesty, stay the fuck away from that shop from now on. If thats not a sign of stupidity, i dont know what is. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

11-21-2007, 08:53 AM	#18
unicoladron Zilvia Junkie Join Date: Jul 2007 Location: Long Island, NY Age: 40 Posts: 568 Trader Rating: (0) Feedback Score: 0 reviews	^--lol, the thread is over, he already picked one up from nissan __________________ 1993 KA24DE for sale with 180k..running when pulled.... need to get rid of ASAP...i'm moving