FS/FT: 240sx parts - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

93sileighty · 11-27-2007, 07:49 AM

I need to clean some stuff out and make a little cash.
Custom ac line for redtop sr into s14 using s14 compressor
Sr20 side mount intercooler
sr20 turbo elbow stock
sr20 downpipe stock
sr20 maf
sohc maf x2
sr/ka top feed fuel rail

front mount intercooler, outlet inlet on on side $100 or trade for a front mount with outlet and inlet on opposite sides

90% Complete 5 spd swap- tranny, x member, 5 spd ecu(s14 obd1 and obd2), brake and cluch pedals w/master cylinder, stock nissan clutch,
all you need are the hardlines(15 bucks from nissan), pilot bushing and slave cylinder. - 400 obo

open to trades for front end s14 parts, bov, wheels/tires, front mount etc. prefer cash and i will ship at buyers expense. pm post or email me at
[email protected]

93sileighty · 12-01-2007, 12:08 PM

Also adding a t25 sr20 turbo with tubular manifold, 370cc injectors with fuel rail and regulator and i think thats it for now, with the parts above(downpipe, turbo elbow, and intercooler) you have almost a complete turbo kit, i also have a jwt ecu that is supposedly tuned for all this but im in the process of confirming that with them.

xamraci · 12-01-2007, 12:12 PM

For some of you folks...

that intercooler would be good for RB20 swapped cars...being that the inlet/outlet share the same side...

Bump

11-27-2007, 07:49 AM	#1
93sileighty Zilvia Member Join Date: Mar 2004 Location: Baton Rouge Posts: 244 Trader Rating: (0) Feedback Score: 0 reviews	FS/FT: 240sx parts I need to clean some stuff out and make a little cash. Custom ac line for redtop sr into s14 using s14 compressor Sr20 side mount intercooler sr20 turbo elbow stock sr20 downpipe stock sr20 maf sohc maf x2 sr/ka top feed fuel rail front mount intercooler, outlet inlet on on side $100 or trade for a front mount with outlet and inlet on opposite sides 90% Complete 5 spd swap- tranny, x member, 5 spd ecu(s14 obd1 and obd2), brake and cluch pedals w/master cylinder, stock nissan clutch, all you need are the hardlines(15 bucks from nissan), pilot bushing and slave cylinder. - 400 obo open to trades for front end s14 parts, bov, wheels/tires, front mount etc. prefer cash and i will ship at buyers expense. pm post or email me at [email protected]

12-01-2007, 12:08 PM	#2
93sileighty Zilvia Member Join Date: Mar 2004 Location: Baton Rouge Posts: 244 Trader Rating: (0) Feedback Score: 0 reviews	Also adding a t25 sr20 turbo with tubular manifold, 370cc injectors with fuel rail and regulator and i think thats it for now, with the parts above(downpipe, turbo elbow, and intercooler) you have almost a complete turbo kit, i also have a jwt ecu that is supposedly tuned for all this but im in the process of confirming that with them.

12-01-2007, 12:12 PM	#3
xamraci Zilvia Member Join Date: Sep 2007 Location: Alabama Age: 41 Posts: 203 Trader Rating: (1) Feedback Score: 1 reviews	For some of you folks... that intercooler would be good for RB20 swapped cars...being that the inlet/outlet share the same side... Bump