FS:1995 240sx SE Black, Built SR, etc - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

gorookie · 05-28-2008, 03:43 AM

Hey guys, putting my car up, here is what its got (pics coming soon!):

Engine (s14 sr20det less than 10k miles after build):
CP pistons (9.0:1)
Eagle Rods
Arp rod bolts
Arp head studs
Cometic Metal headgasket
Greddy Rocker Arm Stopper
Greddy Oil Catch Can
Sard 850CC Injectors
Walbro 255lph Fuel Pump
Silk Road Manifold (1k miles)
Garrett GT2871R .64 Turbo (1k miles)
Custom Water/Oil Turbo Lines (1k miles)
Silk Road Turbo Elbow (1k Miles)
Silk Road Downpipe (1k miles)
3" test pipe
Greddy 80mm TiC Exhaust (2K miles)
Precision FMIC
Koyo Radiator
Dual Electric Fans
HKS SSQV Blow off Valve

Car runs and pulls strong. Dyno'd at 18psi around 360wtq and 350whp, I will post up the sheets. Engine does not burn oil or smoke or leak. Car is running Apexi Power FC DJETRO w/ commander ECU, with Apexi AVCR. Car is professionally tuned by Intec Racing in WA. The only thing holding the car back from more power is the clutch and cams. I am currently driving around on 14psi, not trying to push the clutch. Like it says, less than 10K on motor before build.

Drivetrain:
ACT street clutch
Lightweight Flywheel
Nismo 2 way LSD (2K miles)

Suspension:
Silk Road RM/A8 Coilovers (8 way adj, Pillow Ball mount, 8/7kg f/r)
Silk Road Camber arms (front/rear)

Brakes:
300zx Front/Rear disks/Calipers

Wheels:
(4) 5Zigen FN01R-C 17x9 +15
(4) All Season 235/45-17 (50% tread Left)

Exterior:
s14 JDM Aero (front, sides, rear)

Interior:
s14 JDM Front/Rear seats (dark/light grey)
Black Interior
s14 JDM silvia floor mats
Pioneer AVIC-D2 Touch Screen
MTX speakers
Momo Racer Steering Wheel BLUE

Overall Condition of the car is a 7/10. The interior is an 8, with very few blemishes, no cracks on dash, small scratch on center console (where the seatbelt fastens), brand new radio bezel, door panels are clean. The exterior however is a different story. I will under rate it at a 6. There are no major dents (small unnoticable ones from door dings), small nicks here and there, and the rear bumper has the spider web look goin on. However, the car still looks good, and has authentic jdm pieces made of urathane. Rear fender has a small crack. I guess the only thing this car needs is a paintjob and it will be a really clean s14. This car has a fresh motor build and runs very reliably especially with the smooth tune.

asking $12k OBO Lowered Price! but shoot me some offers, I can budge.

[email protected]

253-651-3930

rhythmnsmoke · 05-28-2008, 07:34 AM

Waiting for the pics.

gorookie · 05-28-2008, 12:18 PM

Quote:

Originally Posted by rhythmnsmoke

Waiting for the pics.

werwuryoantenaz · 05-28-2008, 01:48 PM

B-e-a-u-tiful set up nicely done pROps

gorookie · 05-29-2008, 01:37 AM

Quote:

Originally Posted by werwuryoantenaz

B-e-a-u-tiful set up nicely done pROps

Thanks! lets bump ttt

I am a little flexible on price, shoot me offers!

300hp owen · 05-29-2008, 07:15 AM

looks fucking perfect on those wheels with those sideskirts, nice stance and great buildup!
oh glws for obd1 goodness!

gorookie · 05-30-2008, 09:54 AM

Quote:

Originally Posted by 300hp owen

looks fucking perfect on those wheels with those sideskirts, nice stance and great buildup!
oh glws for obd1 goodness!

Thanks! Ive gotten a couple people asking questions but no serious offers. Still available. Dont be scared to offer me a price!

gorookie · 05-31-2008, 06:22 AM

$12k OBO! Lowered Price

Walperstyle · 05-31-2008, 07:52 AM

bump for NWN sticker on the engine!

gorookie · 06-02-2008, 08:08 AM

still available, bump!

arsvtcobra · 06-03-2008, 08:14 PM

Sent you an email, but no answer. Where exactly are you located in Washington. Email me at [email protected]

**Phlip** · 06-04-2008, 08:22 AM

Too many bumps, the limit is 2 total

Quote:

Originally Posted by gorookie

Thanks! lets bump ttt

I am a little flexible on price, shoot me offers!

Quote:

Originally Posted by gorookie

$12k OBO! Lowered Price

Quote:

Originally Posted by gorookie

still available, bump!

http://www.zilvia.net/f/showthread.php?t=131287

05-28-2008, 03:43 AM	#1
gorookie Join Date: May 2008 Location: WA Age: 40 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	FS:1995 240sx SE Black, Built SR, etc Hey guys, putting my car up, here is what its got (pics coming soon!): Engine (s14 sr20det less than 10k miles after build): CP pistons (9.0:1) Eagle Rods Arp rod bolts Arp head studs Cometic Metal headgasket Greddy Rocker Arm Stopper Greddy Oil Catch Can Sard 850CC Injectors Walbro 255lph Fuel Pump Silk Road Manifold (1k miles) Garrett GT2871R .64 Turbo (1k miles) Custom Water/Oil Turbo Lines (1k miles) Silk Road Turbo Elbow (1k Miles) Silk Road Downpipe (1k miles) 3" test pipe Greddy 80mm TiC Exhaust (2K miles) Precision FMIC Koyo Radiator Dual Electric Fans HKS SSQV Blow off Valve Car runs and pulls strong. Dyno'd at 18psi around 360wtq and 350whp, I will post up the sheets. Engine does not burn oil or smoke or leak. Car is running Apexi Power FC DJETRO w/ commander ECU, with Apexi AVCR. Car is professionally tuned by Intec Racing in WA. The only thing holding the car back from more power is the clutch and cams. I am currently driving around on 14psi, not trying to push the clutch. Like it says, less than 10K on motor before build. Drivetrain: ACT street clutch Lightweight Flywheel Nismo 2 way LSD (2K miles) Suspension: Silk Road RM/A8 Coilovers (8 way adj, Pillow Ball mount, 8/7kg f/r) Silk Road Camber arms (front/rear) Brakes: 300zx Front/Rear disks/Calipers Wheels: (4) 5Zigen FN01R-C 17x9 +15 (4) All Season 235/45-17 (50% tread Left) Exterior: s14 JDM Aero (front, sides, rear) Interior: s14 JDM Front/Rear seats (dark/light grey) Black Interior s14 JDM silvia floor mats Pioneer AVIC-D2 Touch Screen MTX speakers Momo Racer Steering Wheel BLUE Overall Condition of the car is a 7/10. The interior is an 8, with very few blemishes, no cracks on dash, small scratch on center console (where the seatbelt fastens), brand new radio bezel, door panels are clean. The exterior however is a different story. I will under rate it at a 6. There are no major dents (small unnoticable ones from door dings), small nicks here and there, and the rear bumper has the spider web look goin on. However, the car still looks good, and has authentic jdm pieces made of urathane. Rear fender has a small crack. I guess the only thing this car needs is a paintjob and it will be a really clean s14. This car has a fresh motor build and runs very reliably especially with the smooth tune. asking $12k OBO Lowered Price! but shoot me some offers, I can budge. [email protected] 253-651-3930 Last edited by gorookie; 05-31-2008 at 06:23 AM..

05-29-2008, 07:15 AM	#6
300hp owen Zilvia Junkie Join Date: Mar 2007 Location: western, NY Age: 51 Posts: 531 Trader Rating: (0) Feedback Score: 0 reviews	looks fucking perfect on those wheels with those sideskirts, nice stance and great buildup! oh glws for obd1 goodness! __________________ cardomain.com/id/LS1T56FC = my crazy ls1 v8 rx7 = sold

05-31-2008, 07:52 AM	#9
Walperstyle Nissanaholic! Join Date: Nov 2004 Location: Alberta, Red Derp Age: 44 Posts: 1,729 Trader Rating: (0) Feedback Score: 0 reviews	bump for NWN sticker on the engine! __________________ KA-T ORG-Function over Flush

05-28-2008, 07:34 AM	#2
rhythmnsmoke Join Date: Dec 2007 Location: TN Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	Waiting for the pics.

05-28-2008, 01:48 PM	#4
werwuryoantenaz BANNED Join Date: Aug 2005 Location: Tarzana, Ca Age: 39 Posts: 372 Trader Rating: (0) Feedback Score: 0 reviews	B-e-a-u-tiful set up nicely done pROps

05-31-2008, 06:22 AM	#8
gorookie Join Date: May 2008 Location: WA Age: 40 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	$12k OBO! Lowered Price

06-02-2008, 08:08 AM	#10
gorookie Join Date: May 2008 Location: WA Age: 40 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	still available, bump!

06-03-2008, 08:14 PM	#11
arsvtcobra Join Date: May 2008 Location: Arkansas Age: 39 Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	Sent you an email, but no answer. Where exactly are you located in Washington. Email me at [email protected]