s13 vs. s14 catback exhaust - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

RacerBoi · 03-14-2003, 12:50 PM

Whats the difference between the two exhausts. Is it bent the same, but has different hangers? Im interested in buying a certain used s14 exhaust and if all i had to do was to weld different hangers that would be cool. I have an s13 if you didnt figure it out.
Thanks

AKADriver · 03-14-2003, 12:58 PM

S14 exhausts are longer, bent slightly differently, and with different hangers.

RacerBoi · 03-14-2003, 01:08 PM

Thanks for the reply
So thats a no go on the s14 exhaust huh. Has anyone else tried this or seen it done

andrave · 03-14-2003, 02:41 PM

I accidently bought an S14 exhaust and it was cut in half in the center. I took it to a muffler shop to have them weld it back together and it was like 6" too long and hit the floor board in a couple places, as well as the gastank.
Thankfully the guys there were great and they helped bend it, cut it shorter, and modified the hangers to make it work. Still had to pound a little dent in it to make it clear the driver's side floor board at the rear of the car.
They aren't similar at all, in my experience.

03-14-2003, 12:50 PM	#1
RacerBoi Leaky Injector Join Date: Jul 2002 Location: Annapolis, MD Age: 41 Posts: 130 Trader Rating: (0) Feedback Score: 0 reviews	s13 vs. s14 catback exhaust Whats the difference between the two exhausts. Is it bent the same, but has different hangers? Im interested in buying a certain used s14 exhaust and if all i had to do was to weld different hangers that would be cool. I have an s13 if you didnt figure it out. Thanks Last edited by RacerBoi; 03-14-2003 at 12:53 PM..

03-14-2003, 12:58 PM	#2
AKADriver Post Whore! Join Date: May 2002 Location: Springfield, VA Age: 43 Posts: 3,517 Trader Rating: (1) Feedback Score: 1 reviews	S14 exhausts are longer, bent slightly differently, and with different hangers.

03-14-2003, 01:08 PM	#3
RacerBoi Leaky Injector Join Date: Jul 2002 Location: Annapolis, MD Age: 41 Posts: 130 Trader Rating: (0) Feedback Score: 0 reviews	Thanks for the reply So thats a no go on the s14 exhaust huh. Has anyone else tried this or seen it done

03-14-2003, 02:41 PM	#4
andrave BANNED Join Date: Apr 2002 Location: Burton WV Posts: 2,350 Trader Rating: (0) Feedback Score: 0 reviews	I accidently bought an S14 exhaust and it was cut in half in the center. I took it to a muffler shop to have them weld it back together and it was like 6" too long and hit the floor board in a couple places, as well as the gastank. Thankfully the guys there were great and they helped bend it, cut it shorter, and modified the hangers to make it work. Still had to pound a little dent in it to make it clear the driver's side floor board at the rear of the car. They aren't similar at all, in my experience.