Rear main seal help... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

koolcat · 10-09-2008, 04:46 PM

anyone know from which usdm car is the rear main seal interchangeable for the s13 blacktop? Been searching and only see the 93 - Sentra Ser works for the redtop but that why im asking. I only see it specifically works for the redtop but not to sure if it works for the blacktop. Has anyone use it on the s13 blacktop before? Please let me know asap.
This post clearly said for redtop so iono...
http://zilvia.net/f/tech-talk/110449...nce-guide.html

thanks

Sileighty_85 · 10-09-2008, 06:16 PM

SR Red Top = SR BlackTop
Same Bottom end

So yes the Sentra RMS will work

koolcat · 10-09-2008, 06:21 PM

Oh thanks man...but hey can i get any from 91-94 sentra ser rms right? Thanks

Sileighty_85 · 10-09-2008, 06:22 PM

as long as its the SR20DE Model

I believe a KA one works too

240sxspeed · 10-09-2008, 06:59 PM

yssir yessir

projectRDM · 10-09-2008, 08:05 PM

SR is an SR in RWD configuration. If it fits the redtop bottom end, it has to fit the blacktop.

koolcat · 10-10-2008, 12:54 AM

thanks guys

koolcat · 10-14-2008, 04:28 PM

Hey guys i went ahead and bought the rms from the nissan dealer near my place from a 93 nissan sentra Se r. Here is the picture of it, the Se-r is on the left and the oem sr20det is on the right, it has the same diameter but different thickness. Does it matters? Anyone that bought the rms for the Se-r for their redtop or blacktop, can you guys give me some input on this.

thanks again in advance.

Sileighty_85 · 10-15-2008, 08:25 AM

im at work so I cant see the pics but as long as the seal is the same diameter and seals it will be fine.

thickness doesnt really matter, it just might make it a little bit tricker to remove it
when you replace it again.

Just dont knock it all the to the back, postion it to where the actual seals lip sits in the middle the the end crank.

koolcat · 10-15-2008, 11:54 AM

cool thanks man so it sit it half way in...

projectRDM · 10-15-2008, 11:55 AM

Yes, as long as it's flush against the crank and fits snug in the recess, the thickness isn't a huge concern.

10-09-2008, 04:46 PM	#1
koolcat BANNED Join Date: Aug 2007 Location: georgia Age: 37 Posts: 147 Trader Rating: (0) Feedback Score: 0 reviews	Rear main seal help... anyone know from which usdm car is the rear main seal interchangeable for the s13 blacktop? Been searching and only see the 93 - Sentra Ser works for the redtop but that why im asking. I only see it specifically works for the redtop but not to sure if it works for the blacktop. Has anyone use it on the s13 blacktop before? Please let me know asap. This post clearly said for redtop so iono... http://zilvia.net/f/tech-talk/110449...nce-guide.html thanks Last edited by koolcat; 10-09-2008 at 05:16 PM..

10-09-2008, 06:16 PM	#2
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	SR Red Top = SR BlackTop Same Bottom end So yes the Sentra RMS will work __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

10-09-2008, 06:22 PM	#4
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	as long as its the SR20DE Model I believe a KA one works too __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

10-09-2008, 06:59 PM	#5
240sxspeed Zilvia Member Join Date: Nov 2007 Location: DITRY JERSEY Age: 45 Posts: 288 Trader Rating: (5) Feedback Score: 5 reviews	yssir yessir __________________ HOME OF THE LOWBALLERS AND INTERNET THUGZ

10-09-2008, 08:05 PM	#6
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	SR is an SR in RWD configuration. If it fits the redtop bottom end, it has to fit the blacktop. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

10-09-2008, 06:21 PM	#3
koolcat BANNED Join Date: Aug 2007 Location: georgia Age: 37 Posts: 147 Trader Rating: (0) Feedback Score: 0 reviews	Oh thanks man...but hey can i get any from 91-94 sentra ser rms right? Thanks

10-10-2008, 12:54 AM	#7
koolcat BANNED Join Date: Aug 2007 Location: georgia Age: 37 Posts: 147 Trader Rating: (0) Feedback Score: 0 reviews	thanks guys

10-14-2008, 04:28 PM	#8
koolcat BANNED Join Date: Aug 2007 Location: georgia Age: 37 Posts: 147 Trader Rating: (0) Feedback Score: 0 reviews	Hey guys i went ahead and bought the rms from the nissan dealer near my place from a 93 nissan sentra Se r. Here is the picture of it, the Se-r is on the left and the oem sr20det is on the right, it has the same diameter but different thickness. Does it matters? Anyone that bought the rms for the Se-r for their redtop or blacktop, can you guys give me some input on this. thanks again in advance.

10-15-2008, 08:25 AM	#9
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	im at work so I cant see the pics but as long as the seal is the same diameter and seals it will be fine. thickness doesnt really matter, it just might make it a little bit tricker to remove it when you replace it again. Just dont knock it all the to the back, postion it to where the actual seals lip sits in the middle the the end crank. __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

10-15-2008, 11:54 AM	#10
koolcat BANNED Join Date: Aug 2007 Location: georgia Age: 37 Posts: 147 Trader Rating: (0) Feedback Score: 0 reviews	cool thanks man so it sit it half way in...

10-15-2008, 11:55 AM	#11
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Yes, as long as it's flush against the crank and fits snug in the recess, the thickness isn't a huge concern. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com