s14 ka24de in s13 ka24e 1990 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

danielturbo23 · 05-02-2003, 04:29 PM

Hi, I want to swap a ka24de 1995 in s13 1990, I need help because someone says that it's not very easy.

I know that the power steering hoses is not the same and maybe I have to fit the muffler.

But I've got the tranny, the ECU and the complete harness.

I want to know if it's bolt on and if I need more pieces to fit them.

All the help is accept.

Danielturbo23

deviousKA · 05-02-2003, 04:54 PM

why would you want to swap a dohc into a 89-90 240? unless you plan on going ka-t, it would be much easier to find a 91-94 car. i believe the ka24e has more potential if you dont plan to boost. the swap is in no way easy, especially if your inexperienced with nissan engines and wiring diagrams.

danielturbo23 · 05-02-2003, 05:22 PM

Because my tranny is dead and my ka24e is over 250 000km and very tired.

I've got the choice between a 95 or 92 ka

danielturbo23 · 05-04-2003, 08:44 PM

maybe the ka24de 1992 is more easy to fit

FastBack 240 · 05-04-2003, 09:15 PM

Basically the same conversion but with more emission b/s lines to worry about. Trust me. I swapped a 95 into a 92 240. I have extensively looked at both up and down. Also the only difference in the actual enigne that I have noticed is those lines I was talking about and also the intake manifolds. Go for the SR or if you are familiar and have the time/tools/patience swap the KA24DE into your 240.

Driftin_240sx · 05-05-2003, 04:46 PM

ok i know this thread is old, but what makes it so hard? u didnt really say u just said dont do it... a 91-93 ecu wont work??? y wont it? what do you need to do to make this work!!

david

05-02-2003, 04:29 PM	#1
danielturbo23 Leaky Injector Join Date: Apr 2003 Location: Montreal...no Regina ! Age: 45 Posts: 60 Trader Rating: (0) Feedback Score: 0 reviews	s14 ka24de in s13 ka24e 1990 Hi, I want to swap a ka24de 1995 in s13 1990, I need help because someone says that it's not very easy. I know that the power steering hoses is not the same and maybe I have to fit the muffler. But I've got the tranny, the ECU and the complete harness. I want to know if it's bolt on and if I need more pieces to fit them. All the help is accept. Danielturbo23

05-04-2003, 09:15 PM	#5
FastBack 240 Zilvia Addict Join Date: Dec 2002 Location: Motor City......MI Age: 39 Posts: 859 Trader Rating: (0) Feedback Score: 0 reviews	Basically the same conversion but with more emission b/s lines to worry about. Trust me. I swapped a 95 into a 92 240. I have extensively looked at both up and down. Also the only difference in the actual enigne that I have noticed is those lines I was talking about and also the intake manifolds. Go for the SR or if you are familiar and have the time/tools/patience swap the KA24DE into your 240. Last edited by FastBack 240; 05-04-2003 at 09:19 PM..

05-02-2003, 04:54 PM	#2
deviousKA Zilvia Junkie Join Date: Jan 2003 Location: Idaho Posts: 437 Trader Rating: (0) Feedback Score: 0 reviews	why would you want to swap a dohc into a 89-90 240? unless you plan on going ka-t, it would be much easier to find a 91-94 car. i believe the ka24e has more potential if you dont plan to boost. the swap is in no way easy, especially if your inexperienced with nissan engines and wiring diagrams.

05-02-2003, 05:22 PM	#3
danielturbo23 Leaky Injector Join Date: Apr 2003 Location: Montreal...no Regina ! Age: 45 Posts: 60 Trader Rating: (0) Feedback Score: 0 reviews	Because my tranny is dead and my ka24e is over 250 000km and very tired. I've got the choice between a 95 or 92 ka

05-04-2003, 08:44 PM	#4
danielturbo23 Leaky Injector Join Date: Apr 2003 Location: Montreal...no Regina ! Age: 45 Posts: 60 Trader Rating: (0) Feedback Score: 0 reviews	maybe the ka24de 1992 is more easy to fit

05-05-2003, 04:46 PM	#6
Driftin_240sx Zilvia Junkie Join Date: Sep 2002 Location: St. Petersburg, FL Age: 42 Posts: 515 Trader Rating: (1) Feedback Score: 1 reviews	ok i know this thread is old, but what makes it so hard? u didnt really say u just said dont do it... a 91-93 ecu wont work??? y wont it? what do you need to do to make this work!! david