|
|
|||||||
| For Sale Items Post items for sale here. ABSOLUTELY NO COMMERCIAL SALES. |
 |
|
|
Thread Tools | Display Modes |
07-15-2009, 09:56 PM
|
#1 |
|
Leaky Injector
Join Date: Nov 2006
Location: Gainesville/Clearwater, FL
Age: 39
Posts: 88
Trader Rating: (1)
 Feedback Score: 1 reviews
 |
JDM Sideskirts, S15 Turbo, SR20, Greddy FMIC, HKS BOV, 5 Lug, Shell, +more!
Most parts were bought BNIB, have receipts for everything FWIW.
Located in Gainesville. Can make arrangements to meet or travel down south. Not making any special trips for one part, I might make a day of it if I have a bunch of stuff to sell. Will ship at your expense (+paypal fee). No trades, I don't want your junk. Email: ryanfncrowson at gmail dot com Motor: We rebuilt the motor, so all new gaskets seals etc. Motor will need to be broken in! Small leak at the oil feed, before it's dropped in take it to a welder and give em 20 bucks to hit it with a fresh bead. Or JB weld it. (There's a -3AN fitting welded to the block that eliminates the banjo and crush washer system.) The new stuff have 0 miles on them. Almost everything else has <5000 miles. Long block $1500 Valve cover to the oil pan. Will have flywheel, RAS, cams, HG, studs, tstat etc. Will not have accessories, exhaust manifold/turbo, fuel rail or injectors, or clutch. http://c2.ac-images.myspacecdn.com/i...d3d04c4099.jpg http://c3.ac-images.myspacecdn.com/i...c55374fb8e.jpg http://c3.ac-images.myspacecdn.com/i...a26ec36f9e.jpg If you want to add things to it you can choose from (or if you already have an SR): S15 Spec R turbo package $750 Turbo (<5000 miles, NO shaft play, no smoke) Stainless steel braided lines Tubular manifold and copper exhaust manifold gasket All new turbo gaskets http://www.btyproductions.com/clawha.../FS/turbo1.JPG http://www.btyproductions.com/clawha.../FS/turbo2.JPG Enthalpy tuned ECU $350 (for S15 turbo, z32 maf, 550cc injectors) http://www.btyproductions.com/clawhammer/240/FS/ecu.JPG Custom S13 SR Wiring Harness $400 Braided sleeving, injector wires lengthened, maf wires lengthened to run under the dash and through the fender, body harness plug strands lengthened to run in fender, ingitors relocated inside with ECU, eleventy billion unused wires and plugs removed. Index of /clawhammer/240/motor/Harness Greddy S13 LS Spec Intercooler Kit $350 stock BOV nipple on hotside welded shut! http://www.btyproductions.com/clawhammer/240/FS/ic1.JPG http://www.btyproductions.com/clawhammer/240/FS/ic2.JPG http://www.btyproductions.com/clawhammer/240/FS/ic3.JPG http://www.btyproductions.com/clawhammer/240/FS/ic4.JPG Greddy Hotpipe w/ HKS BOV $175 (with Recirc fitting) http://www.btyproductions.com/clawhammer/240/FS/bov.JPG Edge Racing 3" Turbo Elbow and Downpipe $120 Brand new gasket between them. http://www.btyproductions.com/clawha.../elbow_dp1.JPG http://www.btyproductions.com/clawha.../elbow_dp2.JPG SR Starter $100 (New KA starter body with SR head swapped, starts instantly everytime) http://www.btyproductions.com/clawha.../srstarter.JPG SR Alternator $150 (Brand new remanufactured KA alternator ready to bolt to an SR) http://www.btyproductions.com/clawha...0/FS/sralt.JPG http://c4.ac-images.myspacecdn.com/i...d088060c53.jpg Footwork stuffs: Coils $1000 + your crap you'd throw away anyway Stance GR+ Pro, <5000 miles on them, 8/6 springs loaded, 9/7 BNIB, wrenches, z32 lower mounts, z32 uprights, extra set of brand new camber plates. http://www.btyproductions.com/clawha...S/footwork.JPG http://c2.ac-images.myspacecdn.com/i...d4419f368d.jpg 5 lug $450 plus yours Ichiba front conversion hubs, z32 rear hubs, s14 se's with tires with LOTS of tread left. See pic of exhaust above for tread. SPL Tension Rods $150 + yours http://www.btyproductions.com/clawha...S/footwork.JPG Circuit Sports Inner/Outer Tie Rods $80 + yours Misc. crap: (this list will probably grow) Shell $1000 Stock suspension, brakes, 4 lug. If you want any of that stuff add the prices from above to it. Will come with S14 seats, viper alarm/keyless, professional tintjob, lifetime alignment at Firestone, mint and very complete interior. Engine bay spray bombed black. Pignose front with some dents in the fenders. Dent in the rear 1/4 below the big body line on both sides from idiots that can't back out of a parking spot (body kit/valances would cover them, should be able to pop them out easily also.) PM for more details. I see way worse shells go for more, so save the whining for your mother. JDM Chuki 180SX Side Skirts $250 http://www.btyproductions.com/clawha...FS/skirts1.JPG http://www.btyproductions.com/clawha...FS/skirts2.JPG Greddy Boost Gauge $150 Buy both get the pod free! Greddy Oil Pressure Gauge $150 http://c2.ac-images.myspacecdn.com/i...9e2de98d2d.jpg Apexi Hybrid Megaphone Exhaust $350 (1pc very quiet super JDM 80mm goodness) http://c3.ac-images.myspacecdn.com/i...557d957d32.jpg http://www.btyproductions.com/clawha...FS/exhaust.AVI Complete SR Head $200 http://www.btyproductions.com/clawha.../sparehead.JPG S14 Front Seats $150 http://www.btyproductions.com/clawha...or/s14seat.JPG ^Passenger just as clean! Grex Shift Knob $25 Redline Goods Shift Boot $25 (Italian leather, red stitching) http://www.btyproductions.com/clawha...nobandboot.JPG Nismo Motor and Tranny Mounts $170 installed never used. http://www.btyproductions.com/clawha.../FS/mounts.JPG Speed Panels with hardware $40 http://www.btyproductions.com/clawha...peedpanels.JPG Chuki bumper $20 needs to be sanded http://www.btyproductions.com/clawha.../redchuki1.JPG http://www.btyproductions.com/clawha.../redchuki2.JPG http://www.btyproductions.com/clawha.../redchuki3.JPG Chuki bumper grills $10 http://www.btyproductions.com/clawha...hukigrills.JPG SOHC AC Compressor $25 http://www.btyproductions.com/clawha...FS/accomp1.JPG http://www.btyproductions.com/clawha...FS/accomp2.JPG SOHC Alternator $25 http://www.btyproductions.com/clawha...40/FS/alt1.JPG http://www.btyproductions.com/clawha...40/FS/alt2.JPG SOHC Dizzy and sweet OEM rubber cover $25 http://www.btyproductions.com/clawha...0/FS/dizzy.JPG Random filter $20 could use a cleaning T25 Turbo Outlet $20 http://www.btyproductions.com/clawha...bo%20stuff.JPG ^inlet sold S13 Padded Cup Holder Console Lid! $50 http://www.btyproductions.com/clawha...cupholder1.JPG http://www.btyproductions.com/clawha...cupholder2.JPG Single DIN Triple Gauge Plate $10 http://www.btyproductions.com/clawha...gaugeplate.JPG SOHC/SR MAFS $20 w/pigtail http://www.btyproductions.com/clawha...0/FS/srmaf.JPG
__________________
|
|
|
| Sponsored Links |
|
07-16-2009, 09:46 PM
|
#4 | |
|
Nissanaholic!
 Join Date: Dec 2008
Location: San Antonio, TX
Age: 36
Posts: 1,988
Trader Rating: (63)
Feedback Score: 63 reviews
|
Quote:
He said installed but never used.... GLWS |
|
|
|
|
|
07-16-2009, 09:59 PM
|
#5 |
|
Leaky Injector
Join Date: Nov 2006
Location: Gainesville/Clearwater, FL
Age: 39
Posts: 88
Trader Rating: (1)
Feedback Score: 1 reviews
|
Yeah I still have them but not for you, dude. I said I installed them. They have ZERO miles.
For the mods, put a tick mark in the bumps column for this one! ...cock gobblers.
__________________
|
|
|
|
|
07-16-2009, 10:28 PM
|
#7 |
|
Leaky Injector
Join Date: Nov 2006
Location: Gainesville/Clearwater, FL
Age: 39
Posts: 88
Trader Rating: (1)
Feedback Score: 1 reviews
|
You're right. I apologize for being a drunk douche.
Great, there goes another bump. But I really do apologize for being an interweb douche!
__________________
|
|
|
|
|
07-16-2009, 10:43 PM
|
#8 |
|
Leaky Injector
Join Date: Nov 2006
Location: Gainesville/Clearwater, FL
Age: 39
Posts: 88
Trader Rating: (1)
Feedback Score: 1 reviews
|
You're right. I apologize for being a drunk douche.
Great, there goes another bump. But I really do apologize for being an interweb douche!
__________________
|
|
|
|
|
07-26-2009, 08:48 PM
|
#11 | |
|
Nissanaholic!
Join Date: Nov 2007
Location: bumfuck VA
Posts: 1,825
Trader Rating: (33)
  Feedback Score: 33 reviews
|
would u sell the hotpipe without the bov and if so how much?
__________________
Quote:
|
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
