WA Rotora 6 Piston 14" rotor Front and 4 piston 13" rotor rear HUGE brake kit - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

KansaiDrifter · 02-01-2010, 11:49 PM

Hey I've got my brake setup up for sale, I had this on the drift car and it was a trailered car so these maybe have 1000 miles on them? The pads look almost new and have a ton of life left, they grab crazzzy good even when cold, these don't take a warm up period from what I can tell.

*Just noticed I didn't get very good close ups of the calipers so I'll do that tomorrow and tehy all have Stainless Steel Teflon coated brake lines also!

Looking for $3500 obo shipped!

These came off a S13 but will fit S14, S15, Z32 300zx's, and all Skylines, (350z G35 I know fronts for sure but double check for rears) etc... On to the pics!

Here's a stock s13 rotor next to them for comparison.....haha it's comical really,

payne219 · 02-01-2010, 11:53 PM

HAWT DAYUMMM those are hugeeee

free bump

azndummie · 02-02-2010, 12:04 AM

what are the rotor sizes on those? in MM please. thanks

bornslippy73 · 02-02-2010, 12:13 AM

I have the fronts already. Willing to part the rears?

Silviaoneday · 02-02-2010, 12:18 AM

Quote:

Originally Posted by azndummie

what are the rotor sizes on those? in MM please. thanks

http://www.industrial-enclosures.com...n-mm-inch.html

ETHANOLED SR · 02-02-2010, 12:57 AM

Quote:

Originally Posted by azndummie

what are the rotor sizes on those? in MM please. thanks

14" would be a 355mm on the fronts.

Pirate_Freder · 02-02-2010, 01:59 AM

crap...those fronts don't work on 17's do they?

KansaiDrifter · 02-02-2010, 03:13 AM

bornslippy73, Yeah I'd part the rears, maybe pm me an offer?

Pirate_Freder, It just depends on where the little bump on the inside of the wheel is, I've tried some FN01R-C's in 17x10 +12 but it has the bump towards the front side (toward outside of car) so it wouldn't fit, but I've seen other 17's that have the bump on the backside work, I think the Enkei RPF1's fit in 17" because they have the bump on the backside (towards coilover)

I've got some 18x9.5 +15's that fit over them haha, Here's a pic of those rims over them,

Here's some AME 18x9+15 that I ran over them too

Mamba · 02-02-2010, 05:45 AM

im also interested in rear setup pm me

KansaiDrifter · 02-02-2010, 01:55 PM

pm's sent on rear brake setups

KansaiDrifter · 02-03-2010, 01:14 PM

first bump

illest · 02-03-2010, 03:57 PM

sick set up!
Free bump

RB24_S14 · 02-03-2010, 04:27 PM

Holy shit. those are nniceee brakes and rotors!

matt11145 · 02-03-2010, 04:43 PM

I NEED MONEY!!!!!.....maybe il start selling crack

GLWS

KansaiDrifter · 02-03-2010, 09:12 PM

Thanks guys, yeah I look at these everyday and look back at my daily s14 and stare thinking about putting these on it haha

KansaiDrifter · 02-06-2010, 10:12 PM

Here's how they look on my S14 haha, still for sale but I'm going to use them if no one else can.

02-01-2010, 11:49 PM	#1
KansaiDrifter Zilvia Addict Join Date: Oct 2006 Location: Marysville, WA Age: 39 Posts: 615 Trader Rating: (6) Feedback Score: 6 reviews	Rotora 6 Piston 14" rotor Front and 4 piston 13" rotor rear HUGE brake kit Hey I've got my brake setup up for sale, I had this on the drift car and it was a trailered car so these maybe have 1000 miles on them? The pads look almost new and have a ton of life left, they grab crazzzy good even when cold, these don't take a warm up period from what I can tell. *Just noticed I didn't get very good close ups of the calipers so I'll do that tomorrow and tehy all have Stainless Steel Teflon coated brake lines also! Looking for $3500 obo shipped! These came off a S13 but will fit S14, S15, Z32 300zx's, and all Skylines, (350z G35 I know fronts for sure but double check for rears) etc... On to the pics! Here's a stock s13 rotor next to them for comparison.....haha it's comical really,

02-02-2010, 12:04 AM	#3
azndummie Zilvia FREAK! Join Date: Dec 2005 Location: orange county Posts: 1,362 Trader Rating: (14) Feedback Score: 14 reviews	what are the rotor sizes on those? in MM please. thanks __________________

02-02-2010, 12:13 AM	#4
bornslippy73 Zilvia FREAK! Join Date: Dec 2007 Location: SF/Bay Area California Posts: 1,010 Trader Rating: (45) Feedback Score: 45 reviews	I have the fronts already. Willing to part the rears? __________________

02-03-2010, 04:27 PM	#13
RB24_S14 Zilvia Junkie Join Date: Nov 2009 Location: Hagerstown Age: 33 Posts: 477 Trader Rating: (1) Feedback Score: 1 reviews	Holy shit. those are nniceee brakes and rotors! __________________ 460whp 350Z

02-01-2010, 11:53 PM	#2
payne219 Zilvia Junkie Join Date: May 2008 Location: A-Pine drft Age: 36 Posts: 359 Trader Rating: (6) Feedback Score: 6 reviews	HAWT DAYUMMM those are hugeeee free bump

02-02-2010, 01:59 AM	#7
Pirate_Freder Zilvia Junkie Join Date: Mar 2007 Location: Roswell, NM Age: 37 Posts: 515 Trader Rating: (10) Feedback Score: 10 reviews	crap...those fronts don't work on 17's do they?

02-02-2010, 03:13 AM	#8
KansaiDrifter Zilvia Addict Join Date: Oct 2006 Location: Marysville, WA Age: 39 Posts: 615 Trader Rating: (6) Feedback Score: 6 reviews	bornslippy73, Yeah I'd part the rears, maybe pm me an offer? Pirate_Freder, It just depends on where the little bump on the inside of the wheel is, I've tried some FN01R-C's in 17x10 +12 but it has the bump towards the front side (toward outside of car) so it wouldn't fit, but I've seen other 17's that have the bump on the backside work, I think the Enkei RPF1's fit in 17" because they have the bump on the backside (towards coilover) I've got some 18x9.5 +15's that fit over them haha, Here's a pic of those rims over them, Here's some AME 18x9+15 that I ran over them too

02-02-2010, 05:45 AM	#9
Mamba Leaky Injector Join Date: Jul 2007 Location: ottawa, On Age: 36 Posts: 77 Trader Rating: (0) Feedback Score: 0 reviews	im also interested in rear setup pm me

02-02-2010, 01:55 PM	#10
KansaiDrifter Zilvia Addict Join Date: Oct 2006 Location: Marysville, WA Age: 39 Posts: 615 Trader Rating: (6) Feedback Score: 6 reviews	pm's sent on rear brake setups

02-03-2010, 01:14 PM	#11
KansaiDrifter Zilvia Addict Join Date: Oct 2006 Location: Marysville, WA Age: 39 Posts: 615 Trader Rating: (6) Feedback Score: 6 reviews	first bump

02-03-2010, 03:57 PM	#12
illest Zilvia Junkie Join Date: Jan 2010 Location: sunny FL Posts: 348 Trader Rating: (10) Feedback Score: 10 reviews	sick set up! Free bump

02-03-2010, 04:43 PM	#14
matt11145 BANNED Join Date: Nov 2007 Location: pennsylvania Posts: 438 Trader Rating: (2) Feedback Score: 2 reviews	I NEED MONEY!!!!!.....maybe il start selling crack GLWS

02-03-2010, 09:12 PM	#15
KansaiDrifter Zilvia Addict Join Date: Oct 2006 Location: Marysville, WA Age: 39 Posts: 615 Trader Rating: (6) Feedback Score: 6 reviews	Thanks guys, yeah I look at these everyday and look back at my daily s14 and stare thinking about putting these on it haha

02-06-2010, 10:12 PM	#16
KansaiDrifter Zilvia Addict Join Date: Oct 2006 Location: Marysville, WA Age: 39 Posts: 615 Trader Rating: (6) Feedback Score: 6 reviews	Here's how they look on my S14 haha, still for sale but I'm going to use them if no one else can.